Page History
...
draw.io Diagram | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Figure 1: TEM0002-01 block diagram.
...
draw.io Diagram | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
draw.io Diagram | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Table 1: TEM0002-01 main components.
...
Storage device name | Content | Notes | |||
---|---|---|---|---|---|
.. | .. | .. | |||
Microsemi SmartFusion2 SoC FPGA, U2 | Empty | Not programmed. | |||
EEPROM, U6 | Programmed | - | OTP Flash area | Empty | Not programmed. |
Table 1: Initial delivery state of programmable devices on the module.
Boot Process
By default the ... supports QSPI and The SmartBerry supports SD Card boot modes which is controlled by the MODE input signal from the B2B connector JM.mode.
MODE Signal State | Boot Mode |
---|
SD Card |
Low or ground
Table 2: Selecting power-on boot device.
...
Overview
Content Tools