Page History

Hardware

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modulesDesign supports following carriers:

Additional HW Requirements:

Design supports following carriers:

Additional HW Requirements:

Content

For general structure and of the reference design, see Project Delivery - AMD devices

Design Sources

Additional Sources

...

...

...

Reference Design is available on:

• TE0726 "Zynqberry Demo3" Reference Design

Design Flow

...

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

• Vivado/SDK/SDSoCAMD Development Tools#XilinxSoftware-BasicUserGuides
• Vivado Projects - TE Reference Design
•  Project Delivery.

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also be executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
   
2. Press 0 and enter for minimum setupto start "Module Selection Guide"
3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process
   
   1. (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see  see TE Board Part Files
5. Create HDF and export to prebuilt folder
   
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
6. Create Linux (uboot.elf and image.ub) with exported HDFXSA
   
   1. HDF XSA is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
   2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from /os/petalinux
      2. For 128MB and 64MB only:Netboot Offset must be reduced manually, see 68616202
7. Add Linux files (uboot.elf and image.ub) to prebuilt folder
   
   1. "prebuilt\os\petalinux\default<DDR size>" or "prebuilt\os\petalinux\<short name>"
      Notes: Scripts select "prebuilt\os\petalinux\<short name>", if exist, otherwise "prebuilt\os\petalinux\default\<DDR size>"
8. Generate Programming Files with HSI/SDKVitis
   
   1. Run on Vivado TCL: TE::sw_run_hsivitis -all
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
   2. (alternative) Start SDK Vitis with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdkvitis
      Note: See SDK Projects  TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis

Launch

...

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

QSPI

Get prebuilt boot binaries

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
2. Press 0 and enter to start "Module Selection Guide"
   1. Select assembly version
   2. Validate selection
   3. Select Create and open delivery binary folder
      Note: Folder (<project foler>/_binaries_<Artikel Name>) with subfolder (boot_<app name>) for different applications will be generated

QSPI

1. Connect JTAG and power module (TE0726 can be powered via JTAG USB or external)
2. Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
3. Type on Vivado TCL Console:
4. Connect JTAG and power on the carrier with module
5. Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
6. Type on Vivado TCL Console: TE::pr_program_flash _binfile -swapp u-boot
   Note: To program with SDK/Vivado GUI, use special FSBL (zynqmp_fsbl_flash) on setup
            optional "TE::pr_program_flash _binfile -swapp hello_te0726" possible
7. Copy imageBuild Image.ub in Petalinux 
8. Copy the Petalinux image.ub on on SD-Card
   • For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
9. Copy ffmpeg compatible video or aplay compatible audio file init.sh on SD-Card
   • Location : <design-name>/misc/sd/
10. Insert SD-Card

SD

Xilinx Zynq devices in CLG225 package do not support SD Card boot directly from ROM bootloader. Use QSPI for primary boot and SD for secondary boot (u-boot)

...

1. Open Serial Console (e.g. putty)
   
   1. Speed: 115200
   2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
2. Linux Console:
   Note: Wait until Linux boot finished For Linux Login use:
   
   1. User Name: root
   2. Password: root
      Note: Wait until Linux boot finished For Linux Login use:
      
      1. User Name: root
      2. Password: root
3. You can use a Linux shell now.
   1. I2C 1 Bus type: i2cdetect -y -r 5
      Bus 0...5 possible
   2. ETH0 works with udhcpc
   3. USB: insert USB device
4. Start Video with "play <video file>"
   1. "play" is alias to ffmpeg with some parameters for video and audio, type "alias" to see configuration
   2. for videos with higher resolution, disable audio on ffmpeg configuration
5. Start Audio with "aplay <audio files>"
6. Take image from camera (must be enabled with init.sh scripts):
   1. write image to webserver: fbgrab -d /dev/fb1 /srv/www/camera.png
   2. Display image on host PC: http://<ZynqBerry IP>/camera.png

System Design - Vivado

...

PS Interfaces

Activated interfaces:

...

set_property ASYNC_REG true [get_cells {zsys_i/audio/axi_i2s_adi_0/U0/ctrl/tx_sync/out_data_reg[4]}]
set_property ASYNC_REG true [get_cells {zsys_i/audio/axi_i2s_adi_0/U0/ctrl/SDATA_O_reg[0]}]
set_false_path -from [get_clocks clk_fpga_0] -to [get_clocks clk_fpga_3]
set_false_path -from [get_clocks clk_fpga_3] -to [get_clocks clk_fpga_0]

set_false_path -from [get_pins {zsys_i/axi_reg32_0/U0/axi_reg32_v1_0_S_AXI_inst/slv_reg16_reg[1]/C}] -to [get_pins zsys_i/video_in/axis_raw_demosaic_0/U0/colors_mode_i_reg/D]
set_false_path -from [get_pins zsys_i/video_in/csi_to_axis_0/U0/lane_align_inst/err_req_reg/C] -to [get_pins zsys_i/video_in/csi2_d_phy_rx_0/U0/clock_upd_req_reg/D]

set_false_path -from [get_pins {zsys_i/video_in/axi_vdma_0/U0/I_PRMRY_DATAMOVER/GEN_S2MM_FULL.I_S2MM_FULL_WRAPPER/GEN_INCLUDE_REALIGNER.I_S2MM_REALIGNER/GEN_INCLUDE_SCATTER.I_S2MM_SCATTER/sig_max_first_increment_reg[2]/C}] -to [get_pins zsys_i/video_in/axi_vdma_0/U0/I_PRMRY_DATAMOVER/GEN_S2MM_FULL.I_S2MM_FULL_WRAPPER/GEN_INCLUDE_REALIGNER.I_S2MM_REALIGNER/GEN_INCLUDE_SCATTER.I_S2MM_SCATTER/sig_btt_eq_0_reg/D]
set_false_path -from [get_pins {zsys_i/video_in/axi_vdma_0/U0/I_PRMRY_DATAMOVER/GEN_S2MM_FULL.I_S2MM_FULL_WRAPPER/GEN_INCLUDE_REALIGNER.I_S2MM_REALIGNER/GEN_INCLUDE_SCATTER.I_S2MM_SCATTER/sig_btt_cntr_dup_reg[1]/C}] -to [get_pins zsys_i/video_in/axi_vdma_0/U0/I_PRMRY_DATAMOVER/GEN_S2MM_FULL.I_S2MM_FULL_WRAPPER/GEN_INCLUDE_REALIGNER.I_S2MM_REALIGNER/GEN_INCLUDE_SCATTER.I_S2MM_SCATTER/sig_btt_eq_0_reg/D]

Software Design -

...

Vitis

<!--
optional chapter
separate sections for different apps
  -->

For SDK project creation, follow instructions from:SDK Projects

Vitis

Application

SDK template in ./sw_lib/sw_apps/ available.

zynq_fsbl

TE modified 2018.2 FSBL

• Changes:
  • enable VTC and VDMA cores (fsbl_hooks.c)

zynq_fsbl_flash

TE modified 2018.2 FSBL

Changes:

• Set FSBL Boot Mode to JTAG
• Disable Memory initialization

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

hello_te0726

Hello TE0726 is a Xilinx Hello World example as an endless loop instead of one console output and TE FSBL screen on HDMI Monitor.

Software Design -  PetaLinux

For PetaLinux installation and  project creation, follow instructions from:

• PetaLinux KICKstart

Config

For 64MB variant only:

• CONFIG_SUBSYSTEM_NETBOOT_OFFSET = 0x2000000

For 128MB variant only:

• CONFIG_SUBSYSTEM_NETBOOT_OFFSET = 0x4000000

U-Boot

No changes.

Device Tree

SDK template in ./sw_lib/sw_apps/ available.

zynq_fsbl

TE modified 2019.2 FSBL

General:

• Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

• Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

• General Changes: 
  
  • Display FSBL Banner and Device ID

Module Specific:

• Add Files: all TE Files start with te_*
  • enable VTC and VDMA cores for debian desktop

zynq_fsbl_flash

TE modified 2019.2 FSBL

General:

• Modified Files: main.c
• General Changes:
  
  •  Display FSBL Banner
  • Set FSBL Boot Mode to JTAG
  • Disable Memory initialisation

hello_te0726

Hello TE0726 is a Xilinx Hello World example as an endless loop instead of one console output and TE FSBL screen on HDMI Monitor.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

Software Design -  PetaLinux

For PetaLinux installation and  project creation, follow instructions from:

• PetaLinux KICKstart

Config

Start with petalinux-config or petalinux-config --get-hw-description

For 64MB variant only:

• CONFIG_SUBSYSTEM_NETBOOT_OFFSET = 0x2000000

For 128MB variant only:

• CONFIG_SUBSYSTEM_NETBOOT_OFFSET = 0x4000000

U-Boot

Start with petalinux-config -c u-boot
Changes:

• CONFIG_ENV_IS_NOWHERE=y

• # CONFIG_ENV_IS_IN_SPI_FLASH is not set

Device Tree

/include/ "system-conf.dtsi"
/ {
};


/ {
    #address-cells = <1>;
    #size-cells = <1>;

    reserved-memory {
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;
        hdmi_fb_reserved_region@1FC00000 {
            compatible = "removed-dma-pool";
            no-map;
            

/include/ "system-conf.dtsi"
/ {
};


/ {
    #address-cells = <1>;
    #size-cells = <1>;

    reserved-memory {
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;
        hdmi_fb_reserved_region@1FC00000 {
            compatible = "removed-dma-pool";
            no-map;
            // 512M (M modules)
            reg = <0x1FC00000 0x400000>;
            // 128M (R modules)
            //reg = <0x7C00000 0x400000>;
        };
        camera_fb_reserved_region@1F800000 {
            compatible = "removed-dma-pool";
            no-map;
            // 512M (M modules)
            reg = <0x1F800000 0x400000>;
            // 128M (R modules)
            //reg = <0x7800000 0x400000>;
        };

    };

    hdmi_fb: framebuffer@0x1FC00000 {           // HDMI out 
        compatible = "simple-framebuffer";
        // 512M (M modules)
        reg = <0x1FC00000 (1280 * 720 * 4)>;    // 720p
        // 128M (R modules)
        //reg = <0x7C00000 (1280 * 720 * 4)>;   // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
        status = "okay";
    };

    camera_fb: framebuffer@0x1F800000 {         // CAMERA in
        compatible = "simple-framebuffer";
        // 512M (M modules)
        reg = <0x1F800000 (1280 *reg 720= *<0x1FC00000 4)>0x400000>;
    // 720p
        // 128M (R modules)
            //reg = <0x7800000 (1280 * 720 * 4)>;   // 720p<0x7C00000 0x400000>;
        };
        width = <1280>;camera_fb_reserved_region@1F800000 {
            compatible = "removed-dma-pool";
            // 720pno-map;
        height = <720>;  // 512M (M modules)
            reg = <0x1F800000 0x400000>;
     // 720p
       // stride128M = <(1280R * 4)>;    modules)
              //reg 720p
= <0x7800000 0x400000>;
      format = "a8b8g8r8"};

    };

    vcchdmi_3V3fb: fixedregulator@0framebuffer@0x1FC00000 {
        compatible = "regulator-fixed";   // HDMI out 
        regulator-namecompatible = "vccauxsimple-supplyframebuffer";
        regulator-min-microvolt = <3300000>;// 512M (M modules)
        regulator-max-microvoltreg = <3300000>;
<0x1FC00000 (1280 * 720 * 4)>;   regulator-always-on;  // 720p
    };
};

&qspi {
   // #address-cells = <1>;128M (R modules)
    #size-cells = <0>;
    status//reg = "okay";
    flash0: flash@0 {<0x7C00000 (1280 * 720 * 4)>;   // 720p
        compatiblewidth = "jedec,spi-nor";
<1280>;        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;// 720p
        spi-max-frequencyheight = <50000000><720>;
        partition@0x00000000 {
            label = "boot";
  // 720p
        stride reg= =<(1280 <0x00000000* 0x00500000>4)>;
        };
        partition@0x00500000 {
 // 720p
        format  label = "bootenv= "a8b8g8r8";
        status = "okay";
  reg = <0x00500000 0x00020000>};

    camera_fb: framebuffer@0x1F800000 {  };
       // partition@0x00520000CAMERA {in
         compatible   label = "kernelsimple-framebuffer";
        // 512M (M modules)
 reg = <0x00520000 0x00a80000>;
    reg = <0x1F800000 (1280 };
* 720 * 4)>;    // partition@0x00fa0000 {720p
        // 128M (R modules)
 label = "spare";
     //reg = <0x7800000 (1280 * 720  reg = <0x00fa0000 0x00000000>;
  * 4)>;   // 720p
      };
  width = };
};

/*
* We need to disable Linux VDMA driver as VDMA
* already configured in FSBL
*/
&video_in_axi_vdma_0 {
   status = "disabled";
};

&video_out_axi_vdma_0 {
   status = "disabled";
};

&video_out_v_tc_0 {
    //xilinx-vtc: probe of 43c20000.v_tc failed with error -2
    status = "disabled";
};

&gpio0 {
    interrupt-controller;
    #interrupt-cells = <2>;
};

&i2c1 {
    #address-cells = <1>;
    #size-cells = <0>;

    i2cmux0: i2cmux@70  {
<1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;         compatible = "nxp,pca9544";
        #address-cells = <1>;// 720p
        #size-cellsformat = <0>"a8b8g8r8";
    };

    reg = <0x70>;

vcc_3V3: fixedregulator@0 {
        i2c1@0 {compatible = "regulator-fixed";
            #address-cellsregulator-name = <1>"vccaux-supply";
            #size-cellsregulator-min-microvolt = <0><3300000>;
            reg regulator-max-microvolt = <0><3300000>;

        regulator-always-on;
    id_eeprom@50};
};

&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    compatiblestatus = "atmel,24c32okay";
    flash0: flash@0 {
        compatible  reg = <0x50>"jedec,spi-nor";
        reg = <0x0>;
  };

      #address-cells = }<1>;
        i2c1@1#size-cells {= <1>;
   // Display Interface Connector
  spi-max-frequency = <50000000>;
        #address-cells = <1>;partition@0x00000000 {
            #size-cellslabel = <0>"boot";
            reg = <0x00000000 <1>0x00500000>;
        };
        i2c1@2partition@0x00500000 {    // HDMI Interface Connector
            #address-cellslabel = <1>"bootenv";
            #size-cellsreg = <0><0x00500000 0x00020000>;
        };
       reg =partition@0x00520000 <2>;{
            label = }"kernel";
        i2c1@3   { reg = <0x00520000 //0x00a80000>;
 Camera Interface Connector
     };
       #address-cells =partition@0x00fa0000 <1>;{
            #size-cellslabel = <0>"spare";
            reg = <0x00fa0000 <3>0x00000000>;
        };
    };

};

/{*
* We need to usb_phy0: usb_phy@0 {
        compatible = "ulpi-phy";
        #phy-cells = <0>;
        reg = <0xe0002000 0x1000>;
        view-port = <0x0170>;
        drv-vbus;
    }disable Linux VDMA driver as VDMA
* already configured in FSBL
*/
&video_in_axi_vdma_0 {
   status = "disabled";
};

&video_out_axi_vdma_0 {
   status = "disabled";
};

&video_out_v_tc_0 {
    //xilinx-vtc: probe of 43c20000.v_tc failed with error -2
    status = "disabled";
};

&usb0gpio0 {
    usb-phyinterrupt-controller;
    #interrupt-cells = <&usb_phy0><2>;
} ;

/*
* Sound configuration
*/

/&i2c1 {
    // Custom driver based on spdif-transmitter #address-cells = <1>;
    #size-cells = <0>;

    te_audioi2cmux0: i2cmux@70 dummy_codec_te {
        compatible = "tenxp,te-audiopca9544";
        #sound#address-dai-cells = <0><1>;
    };

    // Simple Audio Card from AXI_I2S and custom XADC audio input and
    // PWM audio output cores#size-cells = <0>;
        reg = <0x70>;


        i2c1@0 {
    sound {
        compatible#address-cells = "simple-audio-card"<1>;
            simple-audio-card,name#size-cells = "TE0726-PWM-Audio"<0>;
        simple-audio-card,format = "i2s";
  reg = <0>;

    simple-audio-card,widgets =
       id_eeprom@50 {
    "Microphone", "In Jack",
          compatible = "Line"atmel, 24c32"Line;
 In Jack",
            "Line", "Line Out Jack",
  reg = <0x50>;
            };

      "Headphone", "Out Jack";

};
        i2c1@1 {    // Display Interface Connector
         simple-audio-card,routing =
            "Out Jack", "te-out",
            "te-in", "In Jack";

        simple-audio-card,cpu {
            sound-dai = <&audio_axi_i2s_adi_0>;
        };
        simple-audio-card,codec {
            sound-dai = <&te_audio>;
        };
    };
};

&audio_axi_i2s_adi_0 {
    compatible = "adi,axi-i2s-1.00.a";
    reg = <0x43c00000 0x1000>;
    clocks = <&clkc 15>, <&clkc 18>; // FCLK_CLK0, FCLK_CLK3
    clock-names = "axi", "ref";
    dmas = <&dmac_s 0 &dmac_s 1>;
    dma-names = "tx", "rx";
    #sound-dai-cells = <0>;
};

/*
* We need to disable Linux XADC driver to use XADC for audio recording
*/
&adc {
    status = "disabled";
};

Kernel

Activate:

• CONFIG_XILINX_GMII2RGMII
• CONFIG_USB_USBNET
• CONFIG_USB_NET_SMSC95XX
• CONFIG_USBIP_CORE
• CONFIG_FB_SIMPLE
• CONFIG_SND_SIMPLE_CARD
• CONFIG_SND_SOC_ADI_AXI_I2S

Deactivate:

• FRAMEBUFFER_CONSOLE

Rootfs

   #address-cells = <1>;
            #size-cells = <0>;
            reg = <1>;
        };
        i2c1@2 {    // HDMI Interface Connector
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c1@3 {    // Camera Interface Connector
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
    };

};

/{
    usb_phy0: usb_phy@0 {
        compatible = "ulpi-phy";
        #phy-cells = <0>;
        reg = <0xe0002000 0x1000>;
        view-port = <0x0170>;
        drv-vbus;
    };
};

&usb0 {
    usb-phy = <&usb_phy0>;
} ;

/*
* Sound configuration
*/

/{
    // Custom driver based on spdif-transmitter
    te_audio: dummy_codec_te {
        compatible = "te,te-audio";
        #sound-dai-cells = <0>;
    };

    // Simple Audio Card from AXI_I2S and custom XADC audio input and
    // PWM audio output cores
    sound {
        compatible = "simple-audio-card";
        simple-audio-card,name = "TE0726-PWM-Audio";
        simple-audio-card,format = "i2s";
        simple-audio-card,widgets =
            "Microphone", "In Jack",
            "Line", "Line In Jack",
            "Line", "Line Out Jack",
            "Headphone", "Out Jack";

        simple-audio-card,routing =
            "Out Jack", "te-out",
            "te-in", "In Jack";

        simple-audio-card,cpu {
            sound-dai = <&audio_axi_i2s_adi_0>;
        };
        simple-audio-card,codec {
            sound-dai = <&te_audio>;
        };
    };
};

&audio_axi_i2s_adi_0 {
    compatible = "adi,axi-i2s-1.00.a";
    reg = <0x43c00000 0x1000>;
    clocks = <&clkc 15>, <&clkc 18>; // FCLK_CLK0, FCLK_CLK3
    clock-names = "axi", "ref";
    dmas = <&dmac_s 0 &dmac_s 1>;
    dma-names = "tx", "rx";
    #sound-dai-cells = <0>;
};

/*
* We need to disable Linux XADC driver to use XADC for audio recording
*/
&adc {
    status = "disabled";
};

Kernel

Start with petalinux-config -c kernel

Changes:

• CONFIG_XILINX_GMII2RGMII=y

• CONFIG_USB_USBNET=y

• CONFIG_USB_NET_AX8817X=y

• CONFIG_USB_NET_AX88179_178A=y

• CONFIG_USB_NET_CDCETHER=y

• # CONFIG_USB_NET_CDC_EEM is not set

• CONFIG_USB_NET_CDC_NCM=y

• # CONFIG_USB_NET_HUAWEI_CDC_NCM is not set

• # CONFIG_USB_NET_CDC_MBIM is not set

• # CONFIG_USB_NET_DM9601 is not set

• # CONFIG_USB_NET_SR9700 is not set

• # CONFIG_USB_NET_SR9800 is not set

• # CONFIG_USB_NET_SMSC75XX is not set

• CONFIG_USB_NET_SMSC95XX=y

• # CONFIG_USB_NET_GL620A is not set

• CONFIG_USB_NET_NET1080=y

• # CONFIG_USB_NET_PLUSB is not set

• # CONFIG_USB_NET_MCS7830 is not set

• # CONFIG_USB_NET_RNDIS_HOST is not set

• CONFIG_USB_NET_CDC_SUBSET_ENABLE=y

• CONFIG_USB_NET_CDC_SUBSET=y

• # CONFIG_USB_ALI_M5632 is not set

• # CONFIG_USB_AN2720 is not set

• CONFIG_USB_BELKIN=y

• CONFIG_USB_ARMLINUX=y

• # CONFIG_USB_EPSON2888 is not set

• # CONFIG_USB_KC2190 is not set

• CONFIG_USB_NET_ZAURUS=y

• # CONFIG_USB_NET_CX82310_ETH is not set

• # CONFIG_USB_NET_KALMIA is not set

• # CONFIG_USB_NET_QMI_WWAN is not set

• # CONFIG_USB_NET_INT51X1 is not set

• # CONFIG_USB_SIERRA_NET is not set

• # CONFIG_USB_VL600 is not set

• # CONFIG_USB_NET_CH9200 is not set

• CONFIG_USBIP_CORE=y

• # CONFIG_USBIP_VHCI_HCD is not set

• # CONFIG_USBIP_HOST is not set

• # CONFIG_USBIP_VUDC is not set

• # CONFIG_USBIP_DEBUG is not set

• CONFIG_FB_SIMPLE=y

• CONFIG_SND_SIMPLE_CARD_UTILS=y

• CONFIG_SND_SIMPLE_CARD=y

• # CONFIG_FRAMEBUFFER_CONSOLE is not set

Rootfs

Start with petalinux-config -c rootfs

AvtivateActivate:

• i2c-tools
• alsa-plugins
• alsa-lib-dev
• libasound
• alsa-conf-base
• alsa-conf
• alsa-utils
• alsa-utils-aplay
• busybox-httpd

Applications

startup

Script App to load init.sh from SD Card if available.

See: \os\petalinux\project-spec\meta-user\recipes-apps\startup\filesAdd on new project:

• petalinux-create -t apps -n startup --enable
• copy/create startup app files

rpicam

Application used to enable and configure Raspbery Pi camera module

See: \os\petalinux\project-spec\meta-user\recipes-apps\rpicam\files

Add on new project:

• petalinux-create -t apps -n rpicam --enable
• copy/create rpicam app files

fbgrab

fbgrab

Application used to take screenshot from camera

See: \os\petalinux\project-spec\meta-user\recipes-apps\fgrab

webfwu

Webserver application accemble for Zynq access. Need busybox-httpdApplication used to take screenshot from camera

See: \os\petalinux\project-spec\meta-user\recipes-apps\fgrab

Add on new project:

...

\webfwu\files

Kernel Modules

te-audio-codec

...

See: \os\petalinux\project-spec\meta-user\recipes-modules\te-audio-codec\files

Add on new project:

• petalinux-create -t modules -n te-audio-codec --enable
• copy/create te-audio-codec module files

Core base files

profile

Simple profile for alias

See: \project-spec\meta-user\recipes-core\base-files\files\profile

Add on new project:

...

te-audio-codec\files

Additional Software

...

...