Versions Compared

Old Version 36

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user Thomas Dück

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Template Revision 272.7

  • Module: TRM Name always "TE Series Name" +TRM
    Example: "TE0728 TRM"
  • Carrier: TRM Name usually "TEB Series Name" +TRM
    Example: "TEB0728 TRM"

...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

Overview

he The Trenz Electronic TEI0006 is an Industrial industrial grade module based on Intel® Cyclone 10 GX. Intel  Intel® Cyclone 10 GX device family delivers higher core, transceiver, and I/O performance than the previous generation of low cost FPGAs.

...

  • Intel® Cyclone 10 GX Industrial [10CX220YF780I5G]
    • Package: FBGA-780-FBGA
    • Speed Grade: 5 (Fastest)
    • Temperature: -40°C ~ 100°Cto 100°C
    • Package compatible device 10CX150 and 10CX105 as assembly variant on request possible
  • 2x SDRAM DDR3L Memory IC 8Gb, 800MHz 8 Gbit (1 GByte), Half rate: 533 MHz; Quarter rate: max. 800 MHz
  • 2x SPI Flash, 1 Gb
  • 2x Transceiver Full Ethernet 64-QFN 
  • Programmable Oscillator
  • EEPROM Memory, 2Kb

  • 4x User LED 

  • Gbit (128 MByte)
  • 1x Gigabit Ethernet
  • 10-Channel, Any-Frequency, Any-Output Jitter Attenuator/Clock Multiplier
  • Intel® MAX 10 as System Controller (CPLD)
  • 2 Kbit EEPROM Memory

  • 4x User LED 

  • I/O interfaces: 226/94/46 (IOs/DIFF. Pairs/LVDS Pairs)
  • 12 x 12.5Gbps Transceiver

  • Board to Board (B2B) Connection: Plug-on module with 3 x 160-pin Samtec Razor Beam (ST5) connectors

  • 5 V Power Supply:

    5V

  • Others:

    Dimension: 80m x 60m

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEI0006 block diagram


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxfalse
revision24
diagramNameTEI0006_OV_BD
simpleViewerfalse
width
linksauto
tbstylehiddenlboxtrue
diagramWidth638
revision13
639



Scroll Only
Scroll Only

Image Modified


Main Components

...

Scroll Title
anchorFigure_OV_BD
titleTEI0006 main components


Scroll Ignore

draw.io Diagram
revision
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxfalse
revision8
diagramNameTEI0006_OV_MC
simpleViewerfalse
width
linksauto
tbstylehiddenlboxtrue
diagramWidth6413


Scroll Only

Image Modified



  1. Intel® MAX 10, U18
  2. DC/DC convertor, U4...11
  3. SDRAM DDR3 Memory, U12 ...13- U13
  4. User LEDs, D1...4
  5. Ethernet TrancieverTransceiver, U2- U14
  6. SPI Flash Memory, U1 - U3
  7. Intel® Cyclone 10 GX, U23
  8. EEPROM, U64
  9. Buffer, U16
  10. 10-Channel Clock Multiplier, U14
  11. CryptoAuthentication Device (optional), U19

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Storage device name

Content

Notes

Intel® MAX 10ProgrammedSee CPLD Firmware

Quad SPI Flash

Not Programmed


EEPROMProgrammed

Ethernet MAC

DDR3 SDRAMNot Programmed



Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

The TEI00006 TEI0006 module can be configured using different modes. Mode selection can be done using MSEL[2:0]. MSEL2 is potentially connected to GND so mode selection can be done using MSEL[1:0] which are connected to Bank 3 of Intel Max 10.

Scroll Title
anchorTable_OV_BP
titleBoot process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MODE Signal State

MSEL2MSEL1MSEL0Boot Mode

MSEL[2:0]

010

AS

x4

/ Fast

011

AS

x1

/ Standard

000PS and FPP / Fast
001PS and FPP / Standard


By tying the CONF_DONE, nSTATUSNSTATUS, and nCONFIG NCONFIG pins together, the devices initialize and enter user mode at the same time. If any device in the chain detects an error, configuration stops for the entire chain and you must reconfigure all the devices. For example, if the first device in the chain flags an error on the nSTATUS pinNSTATUS pin, it resets the chain by pulling its nSTATUS NSTATUS pin low.

Scroll Title
anchorTable_OV_BP_CS
titleConfiguration signals.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SignalsConnected toDescriptionNote
nCONFIGNCONFIG1.8VConfiguration triggerFrom U18 ( Intel MAX 10Intel MAX 10) - Bank 3
CONF_DONE1.8VConfiguration done Configuration done To U18 ( Intel MAX 10Intel MAX 10) - Bank 3
nSTATUSNSTATUS1.8VConfiguration status status To U18 ( Intel MAX 10Intel MAX 10) - Bank 3
DCLKU1,U3Configuration clock clock 

To U1 (Flash Memory)

From U18 ( Intel MAX 10Intel MAX 10) - Bank 3

AS_DATA0...3U1Configuration dataTo From U1 (Flash Memory)



Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

B2BConnected toNote

PERST

J2-99Bank A2


...

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGAFPGA BankB2B ConnectorI/O Signal CountVoltage LevelNotes

Intel Cyclone 10 GX

Bank 1C

J3

24 Single ended (

12 Diff pair

)

0.95V

GXBL1C_RX0...5 N/P, GXBL1C_TX0...5 N/P

Bank 1D

J3

24 Single ended (

12 Diff pair

)

0.95V

Bank 2AJ21 Single ended1.8V

GXBL1D_RX0...5 N/P, GXBL1D_TX0...5 N/P

Bank 2A

J2

2 Single ended

1.8V

PERST, CLKUSR

PERST

Bank 2J

J2

46 Single ended (23 Diff pair)

1.8V

VCCIO2J


Bank 2K

J1

46 Single ended (23 Diff pair)

VCCIO2K


Bank 2L

J1

46

48 Single ended (

23

24 Diff pair)

VADJ up to 3

.0V

V


Bank 3A

-

-

1.35V

VDD_DDR

Bank 3B

-

-

1.35V

VDD_DDR

Intel Max 10

Bank 1A

J2

8 Single ended

3.3V


Bank 1B

J2

5 Single ended

3.3V


Bank 2

J3

2

1 Single ended

1.8VIO


Bank 3

-

-

1.8VIO


Bank 5

J2

4

3 Single ended

3.3V


Bank 6

J2

2 Single ended

3.3V


Bank 8

J2

25

23 Single ended

3.3V




JTAG Interface

JTAG access to the TEI0006 SoM is through B2B connector JM2.J2. JTAGEN is pulled up to 3.3V and after power on, JTAG for MAX 10 CPLD is enabled. JTAG port of Cyclon 10 GX device is routed to MAX10 CPLD IOs. The default Firmware connects the JTAG port of the Cyclon 10 GX to the IO pins of the JTAG port in user IO mode. Setting JTAGEN to GND enables JTAG for the Cyclon 10 GX device.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins
Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

B2B Connector

Note
TMSJ2-160
TDIJ2-159
TDOJ2-158
TCK

J2-157

JTAG_EN

JTAGENJ2-105
Connected
Pulled up to 3.3V.


MIO Pins

Page properties
hiddentrue
idComments

you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic.

Example:

MIO PinConnected toB2BNotes
MIO12...14

SPI_CS , SPI_DQ0... SPI_DQ3

SPI_SCK

J2QSPI



Scroll Title
anchorTable_OBP_MIOs
titleMIOs pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinConnected toB2BNotes
MAX_IO1...20, 22U18 (Intel MAX 10) - Bank 8J2
MAX_IO23, 25, 26U18 (Intel MAX 10) - Bank 5
J2



On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs

...

U12...13
Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/InterfaceDesignatorNotes

SDRAM DDR3 Memory

QSPI Flash Memory

U1 - U3U1- AS configuration
EEPROMU64
SPI Flash

DDR3 SDRAM Memory
U1
U12 -
U3
U13
Ethernet
Tranciever
PHYU2
- U14

Intel®

Intel Max 10U18System controller

User LEDs

D1...4D1 (Red), D2...4 (Green)

Quad SPI Flash Memory

OscillatorsU14, U15, U17, U21, Y1

CryptoAuthentication DeviceU19optional


QSPI Flash Memory

Page propertiesdetails
hiddentrue
idComments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.

The TEI0006 is equipped with two Micron SPI flash memory. On-board SPI flash memory is used to store initial FPGA configuration. Besides FPGA configuration, remaining free flash memory can be used for user application and data storage. All four SPI data lines are connected to the FPGA allowing x1 or x4 data bus widths. Maximum data rate depends on the selected bus width and clock frequency.

Scroll Title
anchorTable_OBP_SPI
titleQuad SPI interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

AS Configuration PinAS Configuration Data
DesignatorSchematicConnected toNotes
U1



NCSOCSS Bank (Configuration Bank)Used when you are not configuring using AS
DCKDCLKAS Configuration Clock
AS_DATA0CSS Bank (Configuration Bank)
AS_DATA1CSS Bank (Configuration Bank)
AS Configuration DataAS_DATA2CSS Bank (Configuration Bank)
AS Configuration DataAS_DATA3CSS Bank (Configuration Bank)
U3QSPI_CSBank 2A
QSPI_CKBank 2A
QSPI_DATA0Bank 2A
QSPI_DATA1Bank 2A
QSPI_DATA2Bank 2A
QSPI_DATA3Bank 2A


...

Scroll Title
anchorTable_OBP_EEP
titleI2C EEPROM interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Schematic

U64 EEPROM Pin

B2B

U18 Intel Max 10 Pin

Notes
I2C_SCLSCLJ3-135
Connected to
Bank 2
of Intel Max 10
- K2
I2C_SDASDAJ3-137
Connected to
Bank 2
of Intel Max 10
- L2



Scroll Title
anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinsI2C AddressDesignatorNotes
I2C_SCL, I2C_SDA0x53U64

LEDs

...

anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

...



DDR3 SDRAM

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TEI0006 SoM has two 1 GByte volatile DDR3 SDRAM IC provided by Integrated Silicon Solution Inc for storing user application code and data.

  • Part number: IS43TR16512BL
  • Supply voltage: 1.35 V
  • Speed: Half rate: 533 MHz; Quarter rate: max. 800 MHz
  • Temperature: -40 °C to 95 °C

Ethernet PHY

Scroll Title
anchorTable_OBP_ETH
titleEthernet PHY to Intel Cyclone 10 GX SoC connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal NameConnected toB2BSignal Description

PHY1_MDI0_P

PHY1_MDI0_N

-

-

J2-93

J2-91


PHY1_MDI1_P

PHY1_MDI1_N

-

-

J2-87

J2-85


PHY1_MDI2_P

PHY1_MDI2_N

-

-

J2-81

J2-79


PHY1_MDI3_P

PHY1_MDI3

...

DDR3 SDRAM

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TEI0006 SoM has two 1 Gb volatile DDR3 SDRAM IC for storing user application code and data.

  • Part number: IS43TR16512BL
  • Supply voltage: 1.35V
  • Speed: 800MHz
  • Temperature: 0 ° C to 95 ° C

Ethernet

Scroll Title
anchorTable_OBP_ETH
titleEthernet PHY to Zynq SoC connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal NameConnected toB2BSignal Description

PHY1_MDI0_P

PHY1_MDI0_N

-

-

J2-9375

J2-9173PHY1


ETH1_MDI1_PPHY1_MDI1_NRSTU23, Bank 2A-

-

J2-87

J2-85

PHY1_MDI2_P

PHY1_MDI2_N

-

-

J2-81

J2-79

PHY1_MDI3_P

PHY1_MDI3_N

-

-

J2-75

J2-73

ETH1_RSTBank 2AConnected Pulled-up to DVDDH Voltage.
ETH1_MDCU23, Bank 2A-Connected Pulled-up to DVDDH Voltage.
ETH1_MDIOU23, Bank 2A-Connected Pulled-up to DVDDH Voltage.
ETH1_TXD0...7U23, Bank 2A-8 bit Transfer
ETH1_RXD0...7U23, Bank 2A-8 bit ReceiveRecieve
ETH1_GTXCKU23, Bank 2A-
ETH1_TXCLKU23, Bank 2A-
ETH1_TXENU23, Bank 2A-
ETH1_TXERU23, Bank 2A-
ETH1_RXCKU23, Bank 2A-Pulled-down to GND.Connected to GNG
ETH1_RXDVU23, Bank 2A-Pulled-down to GND.Connected to GNG
PHY1_INT--Pulled-up Connected to DVDDH Voltage.
PHY1_LED1U18, Bank 2

J2-69

Connected Pulled-up to DVDDH Voltage.
PHY1_LED2J2-67U18, Bank 2-Pulled-down to GND.Connected to GNG
ETH1_CRSBAnk U23, Bank 2A-
ETH1_XTAL_INETH_CLKIN-From U21 (25MHz MEMS Oschillator)

...

25 MHz Oscillator)


Intel MAX 10

The TEI0006 is equipped with an Intel MAX 10 device which is a single-chip, non-volatile low-cost programmable logic device (PLD) to integrate the optimal set of system components. Intel MAX 10 (U18) is power and configuration controller on TEI0006 SoM. 

Scroll Title
anchorTable_OBPSIP_CLKMAX10
titleOsillatorsIntel MAX 10 banks information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Intel Max 10 BankSignalsConnected to 
Designator
Description
Frequency
Notes
NoteU21MEMS Oscillator25MHzU15MEMS Oscillator25MHzU17MEMS Oscillator48MHzU14Programmable OscillatorVariable

Power and Power-On Sequence

...

hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit
Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Bank 1AAIN0...7B2B- J2

Bank 1BTCK, TDO, TMS, TDI, JTAGENB2B- J2

Bank 2

PHY1_LED1

PHY1_LED2

Ethernet PHY, U2

Ethernet PHY, U2

Ethernet LED

Ethernet LED

Pulled-up to DVDDH.

Pulled-down to GND.

F_TCK, F_TDO, F_TDI, F_TMSIntel Cyclone 10 GX (U23) - Bank CSSIntel Cyclone 10 JTAG signals
I2C_SDA, I2C_SCL

EEPROM, U64

B2B, J3 

Programmable Oscillator, U14

I2C EEPROM signals
PLL_RST

Programmable Oscillator, U14

Oscillator reset signal
Bank 3NSTATUS, NCONFIG, CONF_DONEIntel Cyclone 10 GX (U23) - Bank CSSIntel Cyclone 10 Configuration signals
DCLK

Intel Cyclone 10 GX (U23) - Bank CSS

SPI Flash, U1

Intel Cyclone 10

Configuration clock from Flash memory


MSEL0...1Intel Cyclone 10 GX (U23) - Bank CSS

Intel Cyclone 10

Configuration mode signals


DEV_CLRN, INIT_DONEIntel Cyclone 10 GX (U23) - Bank 2A

M10_IO0...4Intel Cyclone 10 GX (U23) - Bank 2A

Bank 5

DIS_GROUP1...4N-Channel MOSFET, T1...4Fast Discharching
MAX_IO23...26B2B, J2Intel MAX 10 GPIO

PG_0.95V, EN_0.95V

PG_1.8VIO, EN_1.8VIO

Voltage Regulator, U7

Voltage Regulator, U6

Power control signals
Bank 6




M10_CLK25 MHz Oscillator, U21Intel MAX 10 Clock

VADJ_VS0...2, VADJ_EN

PG_1.35V, EN_1.35V

PG_1.8V, EN_1.8V

PG_VTT, EN_VTT

PG_0V9, EN_0V9

Voltage Regulator, U11

Voltage Regulator, U8

Voltage Regulator, U5

Voltage Regulator, U9

Voltage Regulator, U4

Power control signals
PHY1_33LED1...2

B2B, J2

Ethernet LED

LED_FP_1

LED_FP_2...4

D1

D2...4

User LEDs

Red LED

Green LED

Bank 8

M10_nSTATUS, M10_nCONFIG

B2B, J2Intel MAX 10 configuration signals
MAX_IO1...20, 22B2B, J2Intel MAX 10 GPIO


LEDs

Power Supply

Power supply with minimum current capability of xx A for system startup is recommended.

Power Consumption

...

anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

...

* TBD - To Be Determined

Power Distribution Dependencies

...

anchorFigure_PWR_PD
titlePower Distribution

...

Scroll Only

Image Removed

Power-On Sequence

...

anchorFigure_PWR_PS
titlePower Sequency
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Voltage Monitor Circuit

...

anchorFigure_PWR_VMC
titleVoltage Monitor Circuit
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...

Scroll Title
anchorTable_PWROBP_PRLED
titleModule power rails.On-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Rail Name

B2B Connector

JM1 Pin

B2B Connector

JM2 Pin

B2B Connector

JM3 Pin

DirectionNotes

Bank Voltages

DesignatorColorConnected toActive LevelNote
D1RedLED_FP_1Active high
D2GreenLED_FP_2Active high
D3GreenLED_FP_3Active high
D4GreenLED_FP_4Active high


Clock Sources

The TEI0006 has one crystal, three MEMS oscillators and a programmable clock generator. 

Scroll Title
anchorTable_OBP_CLK
titleOsillators

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeaders

Scroll Title
anchorTable_PWR_BV
titleZynq SoC bank voltages.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          
Designator
Schematic Name
Description
Voltage
Frequency
Notes

...

Connected to

...

detailshiddentrueid
  • This section is optional and only for modules.

    • use "include page" macro and link to the general B2B connector page of the module series,

    For example: 6 x 6 SoM LSHM B2B Connectors
    U21
    MEMS Oscillator
    25MHz
    U2 Ethernet
    		Comments
    Include Page
    PD:6 x 6 SoM LSHM B2B ConnectorsPD:6 x 6 SoM LSHM B2B Connectors

    ? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

    • 3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

      Operating Temperature: -??°C ~ ??°C
      Current Rating: ??A per ContactNumber of Positions: ??
      Number of Rows: ??

    Technical Specifications

    Absolute Maximum Ratings

    U15MEMS Oscillator25MHzIN0 of U14
    U17MEMS Oscillator100 MHzU23, BANK2A USRCLK
    Y1Crystal Oscillator50MHzcrystal input of U14
    U14Programmable OscillatorVariable-



    Scroll Title
    anchorTable_OBP_CLK_PO
    titleProgrammable Oscillator connections
    Scroll Title
    anchorTable_TS_AMR
    titlePS absolute maximum ratings

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    SymbolsDescriptionMinMaxUnit
    VVVVVVVV

    Recommended Operating Conditions

    Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

    ...

    anchorTable_TS_ROC
    titleRecommended operating conditions.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Physical Dimensions

    • Module size: ?? mm × ?? mm.  Please download the assembly diagram for exact numbers.

    • Mating height with standard connectors: ? mm.

    PCB thickness: ?? mm.

    ...

    hiddentrue
    idComments

    In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

    For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

    https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

    SignalsClock TypeIn/ OutConnected toFrequencyNote

    IN0_P

    IN0_N

    Differential

    In

    In

    Oscillator, U15

    GND

    		25 MHz
    IN3 DifferentialInB2B, J3Variable

    XA, XB

    		Differential

    Oscillator, Y1

    		50 MHz

    CLK0

    		DifferentialOutIntel Cyclone 10 GX (U23)- Bank 2AUserDefault off

    CLK1...4

    		DifferentialOutB2B, J3UserDefault off
    REFCLK_EMIFPDifferentialOutIntel Cyclon 10 GX (U23)- Bank 3BUserDefault off
    CLK6...7DifferentialOutIntel Cyclon 10 GX (U23)- Bank 1DUserDefault off
    CLK8...9DifferentialOutIntel Cyclon 10 GX (U23)- Bank 1CUserDefault off


    CryptoAuthentication

    ATECC608A (U19) is a CryptoAuthentication device connected to the I2C bus. This chip is optional, for further description see datasheet of manufacturer.

    Scroll Title
    anchorTable_OBP_EEP
    titleI2C Interface of CryptoAuthentication

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Schematic

    U19 Pin

    		B2B

    U18 Intel Max 10 Pin

    		Notes
    I2C_SCLSCLJ3-135Bank 2 - K2-
    I2C_SDASDAJ3-137Bank 2 - L2-


    Power and Power-On Sequence

    Page properties
    hiddentrue
    idComments

    In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

    • Power on-sequence
    • Power distribution
    • Voltage monitoring circuit


    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


    Power Supply

    Power supply with minimum current capability of 1 A for system startup is recommended.

    Power Consumption

    Scroll Title
    anchorTable_PWR_PC
    titlePower Consumption

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    FPGATypical Current
    Intel Cyclone 10 GXTBD*
    Intel MAX 10TBD*


    * TBD - To Be Determined

    Power Distribution Dependencies

    Scroll Title
    anchorFigure_PWR_PD
    titlePower Distribution


    Scroll Ignore

    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxfalse
    revision11
    diagramNameTEI0006_PWR_PD
    simpleViewerfalse
    width
    linksauto
    tbstylehidden
    diagramWidth639


    Scroll Only

    Image Added


    Power-On Sequence

    Voltage regulators can be enabled through U18 (Intel MAX 10) - Bank 5 and 6.

    Scroll Title
    anchorFigure_PWR_PS
    titlePower Sequence


    Scroll Ignore
    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxfalse
    revision9
    diagramNameTEI0006_PWR_PS
    simpleViewerfalse
    width
    linksauto
    tbstylehidden
    diagramWidth639


    Scroll Only

    Image Added


    Power Rails

    Scroll Title
    anchorTable_PWR_PR
    titleModule power rails.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Power Rail Name

    B2B Connector

    J1 Pin

    B2B Connector

    J2 Pin

    B2B Connector

    J3 Pin

    		Voltage LevelDirectionNotes
    VIN145, 147,149, 151, 153, 155, 157, 159--5 VInput
    VCCIO2K53, 54--1.2 V, 1.25 V, 1.35 V, 1.5 V or 1.8 VInput
    VADJ140,142--adjustable between 1.8 V - 3.0 VOutputVoltages according to EP53A8HQI datasheet but restricted to allowed bank voltage
    VCCIO2J-29,30-1.2 V, 1.25 V, 1.35 V, 1.5 V or 1.8 VInput

    3.3V

    		-149,150-3.3 VOutput
    1.8_VIO--1391.8 VOutput


    Bank Voltages

    Scroll Title
    anchorTable_PWR_BV
    titleSoC bank voltages.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    FPGAFPGA BankVoltage LevelNotes
    Intel Cyclone 10 GXBank 1C0.95 V

    Bank 1D

    		0.95 V
    Bank 2A1.8 V1.8VIO
    Bank 2J1.2 V, 1.25 V, 1.35 V, 1.5 V or 1.8 VVCCIO2J
    Bank 2K1.2 V, 1.25 V, 1.35 V, 1.5 V or 1.8 VVCCIO2K
    Bank 2Ladjustable between 1.8 V - 3.0 VVoltages according to EP53A8HQI datasheet
    Bank 3A1.35 VVDD_DDR
    Bank 3B1.35 VVDD_DDR
    Intel Max 10Bank 1A3.3 V
    Bank 1B3.3 V
    Bank 21.8 V1.8VIO
    Bank 31.8 V1.8VIO
    Bank 53.3V
    Bank 63.3V
    Bank 83.3V



    Board to Board Connectors

    Page properties
    hiddentrue
    idComments
    • This section is optional and only for modules.

    • use "include page" macro and link to the general B2B connector page of the module series,

      For example: 6 x 6 SoM LSHM B2B Connectors

      Include Page
      6 x 6 SoM LSHM B2B Connectors
      6 x 6 SoM LSHM B2B Connectors

    Include Page
    6 x 8 SoM SS5/ST5 B2B Connectors
    6 x 8 SoM SS5/ST5 B2B Connectors

    Technical Specifications

    Absolute Maximum Ratings

    Scroll Title
    anchorTable_TS_AMR
    titleAbsolute maximum ratings

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    SymbolsDescriptionMinMaxUnitNote
    VINPower supply-0.36.0VDetemined by U10.
    VCCIO - 3 V I/OI/O buffers power supply-0.54.10V

    Intel Cyclone 10 GX

    VCCIO - LVDS I/OI/O buffers power supply-0.52.46V

    Intel Cyclone 10 GX

    VADJAdjustable voltage-0.54.10V

    Intel Cyclone 10 GX

    T_STGStorage temperature-4085°C


    Recommended Operating Conditions

    Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

    Scroll Title
    anchorTable_TS_ROC
    titleRecommended operating conditions.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ParameterMinMaxUnitReference Document
    VIN5.05.0V
    VCCIO2.853.15VSee Intel Cyclone 10 GX datasheet.
    VADJ2.853.15VVCCIO


    Physical Dimensions

    • Module size: 60 mm × 80 mm.  Please download the assembly diagram for exact numbers.

    • Mating height with standard connectors: 5 mm.

    • PCB thickness: 1.7 mm
    Page properties
    hiddentrue
    idComments

    In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

    For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

    https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .



    Scroll Title
    anchorFigure_TS_PD
    titlePhysical Dimension


    Scroll Ignore

    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxfalse
    revision3
    diagramNameTEI0006_TS_PD
    simpleViewerfalse
    width
    linksauto
    tbstylehidden
    diagramWidth611


    Scroll Only
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Image Added


    Currently Offered Variants 

    Page properties
    hiddentrue
    idComments

    Set correct link to the shop page overview table of the product on English and German.

    Example for TE0728:

    ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

    DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

    if not available, set.


    Scroll Title
    anchorTable_VCP_SO
    titleTrenz Electronic Shop Overview

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Trenz shop TEI0006 overview page
    English pageGerman page


    Revision History

    Hardware Revision History

    Scroll Title
    anchorTable_RH_HRH
    titleHardware Revision History

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionChangesDocumentation Link
    202-12-2303
    • two input cloock signals on B2B connected directly to GXBL1C bank
    		REV03
    2019-09-1102
    • added 100MHz MEMS oscillator, remove CLKUSR signal from J2
    • replaced U21/U15 by SiT8008
    • added pull-up to M10_NSTATUS signal
    • added pull-up to M10_DEVCLRN, removed signal from J2
    • added optional CryptoAuthentication chip U19
    		REV02
    2018-08-1001-REV01


    Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

    Scroll Title
    anchorFigure_RV_HRN
    titleBoard hardware revision number.


    Scroll Ignore

    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxfalse
    revision3
    diagramNameTEI0006_RV_RHN
    simpleViewerfalse
    width
    linksauto
    tbstyletop
    diagramWidth178


    Scroll Only
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Image Added

    ...

    anchorFigure_TS_PD
    titlePhysical Dimension

    ...

    Scroll Only
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Image Removed

    Currently Offered Variants 

    Page properties
    hiddentrue
    idComments

    Set correct link to the shop page overview table of the product on English and German.

    Example for TE0728:

    ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

    DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

    if not available, set.

    ...

    anchorTable_VCP_SO
    titleTrenz Electronic Shop Overview

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Revision History

    Hardware Revision History

    -
    Scroll Title
    anchorTable_RH_HRH
    titleHardware Revision History

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionChanges


    Document Change History

    Page properties
    hiddentrue
    idComments
    • Note this list must be only updated, if the document is online on public doc!
    • It's semi automatically, so do following

      • Add new row below first

      • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

      • Metadata is only used of compatibility of older exports

    ...

    Scroll Title
    anchorTable_RH_DCH
    titleDocument change history.
    DCH
    titleDocument change history.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionContributorDescription

    Page info
    infoTypeModified date
    dateFormatyyyy-MM-dd
    typeFlat

    Page info
    infoTypeCurrent version
    prefixv.
    typeFlat
    showVersionsfalse

    Page info
    infoTypeModified by
    typeFlat
    showVersionsfalse

    • corrected Bank Voltages for Bank 2J (VCCIO2J) and Bank 2K (VCCIO2K)
    2022-03-18v.85Vitali Tsiukala
    • Added Info about Gigabit Transceivers
    2021-06-07

    v.84

    		Martin Rohrmüller
    • corrected Physical Dimension figure
    • updated to REV03

    2020-01-17

    		v.82Martin Rohrmüller
    • updated to REV02

    2019-06-14

    		v.80Pedram Babakhani

    • Figures updated

    • Technical specifications updated

    2019-05-29

    		v.69Pedram Babakhani
    • initial release

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    change list
    DateRevisionContributorDescription

    Page info
    infoTypeModified date
    dateFormatyyyy-MM-dd
    typeFlat

    Page info
    infoTypeCurrent version
    prefixv.
    typeFlat
    showVersionsfalse

    Page info
    infoTypeModified by
    typeFlat
    showVersionsfalse

    --

    all

    Page info
    infoTypeModified users
    typeFlat
    showVersionsfalse

    • --


    ...