Page History
Template Revision 2.12
...
HTML |
---|
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
...
hidden | true |
---|---|
id | Comments |
Important General Note:
...
Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro
...
Figure template:
...
anchor | Figure_anchorname |
---|---|
title | Text |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
...
Table template:
- Layout macro can be use for landscape of large tables
...
anchor | Table_tablename |
---|---|
title | Text |
...
The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below
...
<type>_<main section>_<name>
- type: Figure, Table
- main section:
- "OV" for Overview
- "SIP" for Signal Interfaces and Pins,
- "OBP" for On board Peripherals,
- "PWR" for Power and Power-On Sequence,
- "B2B" for Board to Board Connector,
- "TS" for Technical Specification
- "VCP" for Variants Currently in Production
- "RH" for Revision History
- name: custom, some fix names, see below
...
"Figure_OV_BD" for Block Diagram
...
"Figure_OV_MC" for Main Components
...
"Table_OV_IDS" for Initial Delivery State
...
"Table_PWR_PC" for Power Consumption
...
"Table_TS_AMR" for Absolute_Maximum_Ratings
...
...
...
Table of Contents
Table of Contents |
---|
Overview
...
...
Key Features' must be split into 6 main groups for modues:
- SoC/FPGA
- Package:
- Speed:
- Temperature:
- RAM/Storage
- E.g. SDRAM, SPI
- On Board
- E.g. CPLD, PLL
- Interface
- E.g. ETH, USB, B2B, Display port
- Power
- E.g. Input supply voltage
- Dimension
Key Features' must be split into 6 main groups for carrier:
- Modules
- TE0808, TE807, TE0803,...
- RAM/Storage
- E.g. SDRAM, SPI
- On Board
- E.g. CPLD, PLL
- Interface
- E.g. ETH, USB, B2B, Display port
- Power
- E.g. Input supply voltage
- Dimension
- SoC FPGA
- Intel Cyclone V (5CSEMA5F31C8N)
- Package: FBGA 896 pins
- Speed: 8
- Temperature: Commercial (Tj = 0 °C to 85 °C)
- RAM/Storage
- 1 GByte DDR3 SDRAM for HPS
- 1 GByte DDR3 SDRAM for FPGA
- 32 MByte SPI for HPS
- 32 MByte SPI for FPGA
- On Board
- 4 x SMA Connector
- Temperature Sensor
- Intel MAX10
- Interface
- LPC FMC Connector
- 4 x PMOD Connector
- JTAG via micro USB B Connector
- UART via
- micro USB B Connector
- 4 x USB 2.0
- Ethernet via RJ45 Connector
- SD Card
- HDMI
- Power
- 12 V Input supply voltage
- Dimension
- 160 mm x 130 mm
...
add drawIO object here.
...
...
...
...
Create DrawIO object here: Attention if you copy from other page, objects are only linked.
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
Main Components
...
hidden | true |
---|---|
id | Comments |
Notes :
- Picture of the PCB (top and bottom side) with labels of important components
- Add List below
Note |
---|
For more information regarding how to add board photoes, Please refer to "Diagram Drawing Guidline" . |
...
anchor | Figure_OV_MC |
---|---|
title | TExxxx main components |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
- ...
- ...
- ...
Initial Delivery State
Page properties | ||||
---|---|---|---|---|
| ||||
Notes : Only components like EEPROM, QSPI flash can be initialized by default at manufacture. If there is no components which might have initial data ( possible on carrier) you must keep the table empty |
...
anchor | Table_OV_IDS |
---|---|
title | Initial delivery state of programmable devices on the module |
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Notes :
- For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
- SD
- USB
- ETH
- FMC
- ...
- For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
- JTAG
- UART
- I2C
- MGT
- ...
Pmod Connector
The TEI0022 board offers four Pmod (2x6 pins, SMD) connectors which provides as a standard modular interface single ended I/O pins for use with extension modules.
Following table gives an overview of the Pmod connectors and the signals routed to the attached Intel Cyclone V U10:
...
...
...
FMC LPC Connector
The FMC (FPGA Mezzanine Card) connector J4 with low pin count (LPC) provides as an ANSI/VITA 57.1 standard a modular interface to the Intel Cyclone V FPGA and exposes numerous of its I/O pins for use by other mezzanine modules and expansion cards.
...
...
...
...
...
...
The FMC connector provides further interfaces like JTAG and I²C interfaces:
...
anchor | Table_SIP_FMC_Interfaces |
---|---|
title | FMC connector pin-outs of available interfaces |
...
FMC_TCK, Pin J4-D29
FMC_TMS, Pin J4-D33
FMC_TDI, Pin J4-D30
FMC_TDO, Pin J4- D31
FMC_TRST#, Pin J4- D34
...
FMC_SCL, Pin J4-C30
FMC_SDA, Pin J4-C31
...
FMC_PRSNT_M2C#, Pin J4-H2 (pulled-up to +3.3V)
FMC_PG_C2M, Pin J4-D1 (pulled-up to +3.3V)
...
'PG' = 'Power Good'-signal
'C2M' = carrier to (Mezzanine) module
'M2C' = (Mezzanine) module to carrier
Several VCCIO voltages are available on the FMC connector to operate the I/O's on different voltage levels:
...
anchor | Table_SIP_FMC_Voltage |
---|---|
title | Available VCCIO voltages on FMC connector |
...
JTAG Interface
...
...
...
...
JTAGSEL1
...
JTAGSEL1
...
...
...
...
SMA Connector
The TEI0022 board offers four SMA connector for trigger and clock input and output connected to the Intel Cyclone V.
...
...
...
...
anchor | Table_OBP_QSPI_FPGA |
---|---|
title | FPGA Quad SPI interface signals and connections |
...
Intel Cyclone V
The on TEI0022 board used Intel Cyclone V device is a SoC with integrated Arm-based HPS. The 5CSEMA5F31C8N version delivers one hard memory controller, 80K logic elements in an FineLineBGA (FBGA) with 896 pins for the commercial temperature range of TJ = 0...85 °C with speed grade eight.
Programmable Clock Generator
There is a Silicon Labs I2C programmable quad PLL clock generator on-board (Si5338A, U3) to generate various reference clocks for the module.
...
anchor | Table_OBP_PLL |
---|---|
title | Programmable quad PLL clock generator inputs and outputs |
...
IN1
...
-
...
Not used
...
IN3
...
Reference input clock
...
IN4
...
IN5
...
-
...
I²C interface muxed to FPGA
Slave address: 0x70.
...
I²C interface muxed to FPGA
Slave address: 0x70.
...
CLK0A/B
...
CLK_B3B_p/n
...
Clock to FPGA bank 3B
...
CLK1A/B
...
CLK_B4A_p/n
...
Clock to FPGA bank 4A
...
Clock to Intel MAX10 bank 2
...
Oscillators
The FPGA module has following reference clocking source provided by an on-board oscillator:
...
anchor | Table_OBP_OSC |
---|---|
title | Reference clock signals |
...
...
Connected to
...
SD Card Connector
SD Card connector J3 is connected to the Intel Cyclone V.
On-board Peripherals
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Page properties | ||||
---|---|---|---|---|
| ||||
Notes : In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection |
...
anchor | Table_OBP |
---|---|
title | On board peripherals |
...
Temperatur Sensor
The temperature sensor ADT7410 is implemented on the TEI0022 board.
UART Interface
A UART connection between the USB B connector J5 and the Intel Cyclone HPS U10 is possible via the FT234XD (U30) chip.
Quad SPI Flash Memory
Page properties | ||||
---|---|---|---|---|
| ||||
Notes : Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options. |
Two 256 Mbit (32 MByte) Quad SPI Flash Memory (Micron MT25QL256ABA8E12, U6, U15) are provided for FPGA and HPS configuration file storage. After configuration process completes the remaining free memory can be used for application data storage. All four SPI data lines are connected to the FPGA and the HPS allowing x1, x2 or x4 data bus widths to be used. The maximum data transfer rate depends on the bus width and clock frequency.
Quad SPI Flash memory U6 is connected to the HPS bank 7B and U15 to FPGA bank 3A.
...
anchor | Table_OBP_QSPI_HPS |
---|---|
title | HPS Quad SPI interface signals and connections |
...
...
...
...
...
...
I2C
The TEI0022 provides two independent I2C busses. One bus is used to connect the FMC I2C with the Intel Cyclone V HPS. The other bus is used to handle the on-board I2C devices.
...
anchor | Table_OBP_I2C |
---|---|
title | On-board peripherals' I2C-interfaces device slave addresses |
...
System Controller Intel MAX10
The TEI0022 is equipped with an Intel MAX10 (U41) which is the central system management unit where essential control signals are logically linked by the implemented logic of the FPGA firmware. This generates output signals to control the system, the on-board peripherals and the interfaces. Interfaces like JTAG and buttons between the on-board peripherals and to the FPGA-module are by-passed, forwarded and controlled by the System Controller. Other tasks of the System Controller are the monitoring of the power-on sequence and configuration of the Intel Cyclone V FPGA. The functionalities and configuration of the pins depend on its firmware.
EEPROM
...
...
...
...
High-Speed USB ULPI PHY
USB PHY (U8) is provided by USB3320C from Microchip. The ULPI interface is connected to the Intel Cyclone V HPS. I/O voltage is fixed at 3.3 V and PHY reference clock input is supplied from the on-board 24.0 MHz oscillator (U34).
...
anchor | Table_OBP_USB_PHY |
---|---|
title | USB PHY interface connections |
...
4-Port USB 2.0 Hub
On the TEI0022 board there are up to four USB 2.0 Hi-Speed ports available (J2, J12). The USB 2.0 ports are provided by Microchip Cypress USB2514B 4-port USB 2.0 Hub controller (U33) which is connected to the USB PHY USB3320C (U8) connected to the Intel Cyclone V HPS via ULPI.
Buttons
...
...
...
...
...
...
...
...
...
DIP-Switches
There are three 4-bit DIP-switches present on the TEI0022 board to configure options and set parameters. The following section describes the functionalities of the particular switches.
...
...
...
...
...
...
...
...
...
...
...
DIP-Switch S7
...
...
...
...
...
DIP-Switch S8
...
...
...
...
...
On-Board LEDs
...
...
...
DDR3 SDRAM
Page properties | ||||
---|---|---|---|---|
| ||||
Notes : Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3) |
The TEI0022 SoM has one GByte volatile DDR3 SDRAM memory per FPGA (U26, U27) and HPS (U28, U29) for storing user application code and data.
- Part number: IS43TR16512BL-125KBLI
- Supply voltage: 1.35 V
- Speed: ???
- Temperature: TC = -40 °C up to 95 °C
Gigabit Ethernet PHY
On-board Gigabit Ethernet PHY (U1) is provided with Analog Devices ADIN1300. The Ethernet PHY RGMII interface is connected to the Intel Cyclone V HPS. I/O voltage is fixed at 3.3 V. The reference clock input of the PHY is supplied from the on-board 25.0 MHz oscillator (U48).
...
anchor | Table_OBP_ETH |
---|---|
title | Ethernet PHY to HPS connections |
...
ETH_TXCTL
...
ETH_RXCTL
...
HDMI Connector
The TEI0022 board provides an HDMI interface routed to the Intel Cyclone FPGA (U10). The HDMI interface is created by the HDMI transmitter ADV7511 provided by Analog Devices. The HDMI transmitter is incorporated in conjunction with the HDMI protection circuit TI TPD12S016 for more signal robustness.
...
anchor | Table_OBP_HDMI |
---|---|
title | HDMI connector signals and pins |
...
HDMI transmitter, Pin 40, 39
...
also connected to HDMI protection circuit
...
Oscillators
...
anchor | Table_OBP_CLK |
---|---|
title | Osillators |
...
Power and Power-On Sequence
...
hidden | true |
---|---|
id | Comments |
In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:
- Power on-sequence
- Power distribution
- Voltage monitoring circuit
Note |
---|
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" . |
Power Supply
The maximum power consumption of this board mainly depends on the design which is running on the FPGA. Intel provides a power estimator excel sheets to calculate power consumption.
Power Consumption
...
anchor | Table_PWR_PC |
---|---|
title | Power Consumption |
...
* TBD - To Be Determined
Power Distribution Dependencies
All on-board voltages of the TEI0022 are generated out of the extern applied 12 V power supply.
There are following dependencies how the initial 12V power supply is distributed to the on-board DC-DC converters, which power up further DCDC converters and the particular on-board voltages:
...
anchor | Figure_PWR_PD |
---|---|
title | Power Distribution |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
Power-On Sequence
...
anchor | Figure_PWR_PS |
---|---|
title | Power Sequency |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
Voltage Monitor Circuit
The voltages +3.3V, +5.0V, and VCC are monitored by the voltage monitor circuit LTC2911 (U54), which generates the a reset signal at power-on. A manual reset is also possible as described in the reset table.
...
anchor | Figure_PWR_VMC |
---|---|
title | Voltage Monitor Circuit |
...
anchor | Figure_PWR_VMC |
---|---|
title | Voltage Monitor Circuit |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
Power Rails
...
anchor | Table_PWR_PR |
---|---|
title | Module power rails. |
...
B2B Connector
JM1 Pin
...
B2B Connector
JM2 Pin
...
B2B Connector
JM3 Pin
...
Bank Voltages
...
anchor | Table_PWR_BV |
---|---|
title | Zynq SoC bank voltages. |
...
Bank
...
Voltage
...
hidden | true |
---|---|
id | Comments |
...
use "include page" macro and link to the general B2B connector page of the module series,
...
? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.
3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)
Operating Temperature: -??°C ~ ??°C
Current Rating: ??A per ContactNumber of Positions: ??
Number of Rows: ??
...
...
...
...
Physical Dimensions
Module size: ?? mm × ?? mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: ? mm.
PCB thickness: ?? mm.
...
hidden | true |
---|---|
id | Comments |
In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.
For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:
Note |
---|
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" . |
...
anchor | Figure_TS_PD |
---|---|
title | Physical Dimension |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, objects are only linked. |
...
...
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed
Currently Offered Variants
...
...
...
...
...
...
...
Create DrawIO object here: Attention if you copy from other page, objects are only linked.
...
...
Page info | ||||||
---|---|---|---|---|---|---|
|
...
...
...
infoType | Modified by |
---|---|
type | Flat |
showVersions | false |
...
change list
...
--
...
all
...
Page info | ||||||
---|---|---|---|---|---|---|
|
...
- --
...