Page History

Template Revision 2.12

...

HTML

<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>

...

hidden	true
id	Comments

Important General Note:

...

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

...

Figure template:

...

anchor	Figure_anchorname
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...

Table template:

Layout macro can be use for landscape of large tables

...

anchor	Table_tablename
title	Text

...

The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below

Template Change history:

Version	Changes	Author
4.1	Minor changes Notes Tables	ED
4.0	Rework for smaller TRM which can be generated faster Reduce Signal Interfaces Pin Reduce On Board Perihery Reduce Power Move Configuration Signals from Overview to own section	JH
3.12	Version History changed from list to table all changed title-alignment for tables from left to center	ma
3.11	update "Recommended Operating Conditions" section
3.1	New general notes for temperature range to "Recommended Operating Conditions"
3.02	add again fix table of content with workaround to use it for pdf and wiki Export Link for key features examples Notes for different Types (with and without Main FPGA) Export Link for Signals, Interfaces and Pins examples Notes for different Types (Modul, Modul Hypride, Evalboard, Carrier)
3.01	remove fix table of content and page layout ( split page layout make trouble with pdf export) changed and add note to signal and interfaces, to on board periphery section ...(not finished)
3.00	→ separation of Carrier/Module and evaluation kit TRM
2.15	add excerpt macro to key features
2.14	add fix table of content add table size as macro

Page properties

hidden	true
id	Comments

Important General Note:

If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

Figure template:

Scroll Title

anchor	Figure_anchorname
title-alignment	center
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:
- Layout macro can be use for landscape of large tables

Scroll Title

anchor	Table_tablename
title-alignment	center
title	Text

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Example	Comment
1	2

The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below
- <type>_<main section>_<name>
  - type: Figure, Table
  - main section:
    - "OV" for Overview
    - "SIP" for Signal Interfaces and Pins,
    - "OBP" for On board Peripherals,
    - "PWR" for Power and Power-On Sequence,
    - "B2B" for Board to Board Connector,
    - "TS" for Technical Specification
    - "VCP" for Variants Currently in Production
    - "RH" for Revision History
  - name: custom, some fix names, see below
- Fix names:
  - "Figure_OV_BD" for Block Diagram
  - "Figure_OV_MC" for Main Components
  - "Table_OV_IDS" for Initial Delivery State
  - "Table_PWR_PC" for Power Consumption
  - "Figure_PWR_PD" for Power Distribution
  - "Figure_PWR_PS" for Power Sequence
  - "Figure_PWR_PM" for Power Monitoring
  - "Table_PWR_PR" for Power Rails
  - "Table_PWR_BV" for Bank Voltages
  - "Table_TS_AMR" for Absolute_Maximum_Ratings
  - "Table_

...

type: Figure, Table
main section:
- "OV" for Overview
- "SIP" for Signal Interfaces and Pins,
- "OBP" for On board Peripherals,
- "PWR" for Power and Power-On Sequence,
- "B2B" for Board to Board Connector,
- "TS" for Technical Specification
- "VCP" for Variants Currently in Production
- "RH" for Revision History
name: custom, some fix names, see below

...

"Figure_OV_BD" for Block Diagram

...

"Figure_OV_MC" for Main Components

...

"Table_OV_IDS" for Initial Delivery State

...

"Table_PWR_PC" for Power Consumption

...

"Table_TS_AMR" for Absolute_Maximum_Ratings

...

- - - TS_ROC" for Recommended_Operating_Conditions
    - "Figure_TS_PD" for Physical_Dimensions
    - "Table_VCP_SO" for TE_Shop_Overview
    - "Table_RH_HRH" for Hardware_Revision_History
    - "Figure_RH_HRN" for Hardware_Revision_Number
    - "Table_RH_DCH" for Document_Change_History
- Use Anchor in the document: add link macro and add "#<anchorname>
- Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>

Page properties

hidden	true
id	Comments

-----------------------------------------------------------------------

Page properties

hidden	true
id	Comments

Note for Download Link of the Scroll ignore macro:

Link to the base folder of the module (remove de/ or en/ from the URL):
Example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5_Carriers/TE0728/

Scroll Ignore
Download PDF version of this document.

Overview

Scroll Ignore

scroll-pdf
scroll-viewport	true

...

Table of Contents

Table of Contents

Overview

...

Ethernet PHY, one GByte DDR3 SDRAM per HPS and FPGA and one 32 MByte Quad SPI Flash memory for configuration and operation per HPS and FPGA, and powerful switching-mode power supplies for all on-board voltages.

Refer to http://trenz.org/tei0022-info for the current online version of this manual and other available documentation.

Page properties

hidden	true
id	Comments

Notes :

short description of the PCB
Short Link of the wiki resources reference:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0728-info
- List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Key Features

Page properties

hidden	true
id	Comments

Note:
'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

...

Key Features' must be split into 6 main groups for modues:

→ See examples fro different types <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-KeyFeatures

Excerpt
SoC FPGA Intel Cyclone V (5CSEMA5F31C8N) Package: FBGA 896 pins Speed Grade: 8 Temperature: Commercial (Tj = 0 °C to 85 °C)

...

E.g. CPLD, PLL

...

E.g. ETH, USB, B2B, Display port

...

E.g. Input supply voltage

...

Key Features' must be split into 6 main groups for carrier:

Modules
- TE0808, TE807, TE0803,...
RAM/Storage
- E.g. SDRAM, SPI
On Board
- E.g. CPLD, PLL
Interface
- E.g. ETH, USB, B2B, Display port
Power
- E.g. Input supply voltage
Dimension

SoC FPGA
- Intel Cyclone V (5CSEMA5F31C8N)
- Package: FBGA 896 pins
- Speed Grade: 8
- Temperature: Commercial (Tj = 0 °C to 85 °C)
RAM/Storage
- 1 GByte DDR3 SDRAM for HPS
- 1 GByte DDR3 SDRAM for FPGA
- 32 MByte SPI for HPS
- 32 MByte SPI for FPGA
On Board
- 7 x SMA Connector
- Temperature Sensor
- Intel MAX10 for board management
Interface
- LPC FMC Connector
- 4 x PMOD Connector
- JTAG via micro USB B Connector
- UART via micro USB B Connector
- 4 x USB 2.0
- Ethernet via RJ45 Connector
- SD Card
- HDMI
Power
- 12 V Input supply voltage
Dimension
- 160 mm x 130 mm

Block Diagram

...

hidden	true
id	Comments

add drawIO object here.

Note
For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .

...

anchor	Figure_OV_BD
title	TExxxx block diagram

- 1 GByte DDR3 SDRAM for HPS
- 1 GByte DDR3 SDRAM for FPGA
- 32 MByte SPI for HPS
- 32 MByte SPI for FPGA
On Board
- up to 7 x SMA Connector
- Temperature Sensor
- Intel MAX10 for board management
Interface
- LPC FMC Connector
- 4 x Pmod Connector
- JTAG
- UART via micro USB B Connector (for FPGA)
- UART via micro USB B Connector (for HPS)
- 4 x USB 2.0 Host
- Ethernet via RJ45 Connector
- SD Card
- HDMI
Power
- 12 V Input supply voltage
Dimension
- 160 mm x 130 mm

Block Diagram

Page properties

hidden	true
id	Comments

add drawIO object in Scroll Ignore section and add reference image in Scroll Only.

Note
For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .

Note

Title (not anchor) of all Scroll Title such as DrawIOs and Tables should be changed according to the Module name.

Example: TE0812 Block Diagram

Note

All created DrawIOs should be named according to the Module name:

Example: DrawIO of TE0812 Block Diagram should be named TE0812_OV_BD

Scroll Title

anchor	Figure_OV_BD
title	TEI0022 block diagram

Scroll Ignore

draw.io Diagram

border	false
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	9
diagramName	TEI0022 block diagram
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	636

Scroll Only
Image Added

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

...

Main Components

Page properties

hidden	true
id	Comments

Notes :

Picture of the PCB (top and bottom side) with labels of important components
Add List below

Note
For more information regarding how to add board photoes, Please refer to "Diagram Drawing Guidline" .

Scroll Title

title
anchor	Figure_OV_MC

...

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...

Initial Delivery State

Page properties

hidden	true
id	Comments

Notes :

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

anchor	Table_OV_IDS
title	Initial delivery state of programmable devices on the module

...

Storage device name

...

Content

...

Notes

4
SD Card Connector, J3
Ethernet PHY, U1
RJ45 Connector, J1
USB PHY, U8
USB HUB, U33
USB Connector, J2, J12
HDMI Transmitter, U23
HDMI Connector, J11
Intel MAX10, U41
Micro USB to UART Interface, J5, U30
USB to JTAG , U21
Micro USB JTAG and UART, J13
SMA Connector
Push Button, S1, S3...5
LED
4-Bit DIP Switch, S2, S7...8
12 V Power Jack, J6
Clock Generator, U48
Programmable Clock Generator, U3
QSPI - FPGA PS, U6
QSPI - FPGA PL, U15
Temperature Sensor, U16
EEPROM, U38

Initial Delivery State

Page properties

hidden	true
id	Comments

Note

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

Scroll Title

anchor	Table_OV_IDS
title	Initial delivery state of programmable devices on the module

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Storage device name	Content	Notes
HPS SPI Flash

...

MAC programmed, otherwise not programmed	Ethernet MAC
FTDI EEPROM (U31)	Programmed	FTDI Functionality
Programmable Clock Generator Si5338 (U3)	Programmed, CLK0 - 50M, CLK1 - 50M, CLK2 - 25M, CLK3 - 50M	--

Configuration Signals

Page properties

hidden	true
id	Comments

Overview of Boot Mode, Reset, Enables.

Boot Mode must be set using DIP Switch S7 on the module TEI0022. Please note that the DIP Switch is active low.

Scroll Title

anchor	Table_OV_BP
title	Boot process.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

...

FPGA

...

Scroll Title

anchor	Table_OV_RST
title	Reset process.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Reset	Button

...

Page properties

hidden	true
id	Comments

Notes :

For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
- SD
- USB
- ETH
- FMC
- ...
For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
- JTAG
- UART
- I2C
- MGT
- ...

Pmod Connector

The TEI0022 board offers four Pmod (2x6 pins, SMD) connectors which provides as a standard modular interface single ended I/O pins for use with extension modules.

...

Scroll Ignore

scroll-viewport	true
scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

For subsection examples see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

Note
Table with all connectors and Designtor List of different interfaces per connector IO CNT (for FPGA IOs where functionality can be changed by customer)

FMC LPC Connector

The FMC (FPGA Mezzanine Card) connector J4 with low pin count (LPC) provides as an ANSI/VITA 57.1 standard a modular interface to the Intel Cyclone V FPGA and exposes numerous of its I/O pins for use by other mezzanine modules and expansion cards.

The connector supports single ended (VCCIO: FMC_VADJ) and differential signaling as the I/O's are routed from the FPGA banks as LVDS-pairs to the FMC connector.

Scroll Title

anchor	Table_SIP_

...

FMC LPC Connector

The FMC (FPGA Mezzanine Card) connector J4 with low pin count (LPC) provides as an ANSI/VITA 57.1 standard a modular interface to the Intel Cyclone V FPGA and exposes numerous of its I/O pins for use by other mezzanine modules and expansion cards.

...

Direction	I/O Signal Count (Single Ended/Differential)	Voltage Level	Notes
LA0...1	RX	4 / 2	FMC_VADJ	Voltage level as visible in table Intel Cyclone V SoC bank voltages.
LA3, LA5, LA7, ..., LA33	RX	32 / 16	FMC_VADJ	Voltage level as visible in table Intel Cyclone V SoC bank voltages.
LA2, LA4, LA6, ..., LA32	TX	32 / 16	FMC_VADJ	Voltage level as visible in table Intel Cyclone V SoC bank voltages.
CLK0...1	RX	4 / 2	FMC_VADJ	Voltage level as visible in table Intel Cyclone V SoC bank voltages.

The FMC connector provides further interfaces like JTAG and I²C:

Scroll Title

anchor	Table_SIP_FMC_Interfaces
title	FMC connector pin-outs of available interfaces

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Interface

I/O Signal Count

Pin schematic Names / FMC Pins

Connected to

Notes

JTAG

5

FMC_TCK, Pin J4-D29

FMC_TMS, Pin J4-D33

FMC_TDI, Pin J4-D30

FMC_TDO, Pin J4-D31

FMC_TRST#, Pin J4-D34

Intel MAX10 U41, Bank 3

VCCIO: +3.3V

I2C

2

FMC_SCL, Pin J4-C30

FMC_SDA, Pin J4-C31

Intel MAX10 U41, Bank 3 and Intel Cyclone V U10, Bank 7A

I2C-lines pulled-up to +3.3V

Control Lines

2

FMC_PRSNT_M2C#, Pin J4-H2 (pulled-up to +3.3V)

FMC_PG_C2M, Pin J4-D1 (pulled-up to +3.3V)

Intel MAX10 U41, Bank 3 and Intel Cyclone V U10, Bank 5B / 7C

'PG' = 'Power Good'-signal

'C2M' = carrier to (Mezzanine) module

'M2C' = (Mezzanine) module to carrier

Several VCCIO voltages are available on the FMC connector to operate the I/O's on different voltage levels:

Scroll Title

title
anchor	Table_SIP_FMC_Voltage

...

VCCIO Schematic Name	FMC Connector J4 Pins	Notes
+12.0V_FMC	C35/C37	extern 12 V power supply
+3.3V_FMC	D36/D38/D40/C39	3.3 V peripheral supply voltage
+3.3V	D32	3.3 V peripheral supply voltage
FMC_VADJ	H40/G39	adjustable FMC VCCIO voltage, supplied by DC-DC converter U43
FMC_VREF_A_M2C	H1	adjustable reference voltage

Pmod Connector

The TEI0022 board offers four Pmod (2x6 pins, SMD) connectors which provides as a standard modular interface single ended I/O pins for use with extension modules.

Following table gives an overview of the Pmod connectors and the signals routed to the attached Intel Cyclone V (U10):

scroll

...

The FMC connector provides further interfaces like JTAG and I²C interfaces:

...

FMC_TCK, Pin J4-D29

FMC_TMS, Pin J4-D33

FMC_TDI, Pin J4-D30

FMC_TDO, Pin J4- D31

FMC_TRST#, Pin J4- D34

...

FMC_SCL, Pin J4-C30

FMC_SDA, Pin J4-C31

...

FMC_PRSNT_M2C#, Pin J4-H2 (pulled-up to +3.3V)

FMC_PG_C2M, Pin J4-D1 (pulled-up to +3.3V)

...

'PG' = 'Power Good'-signal

'C2M' = carrier to (Mezzanine) module

'M2C' = (Mezzanine) module to carrier

Several VCCIO voltages are available on the FMC connector to operate the I/O's on different voltage levels:

...

anchor	Table_SIP_FMC_Voltage
title	Available VCCIO voltages on FMC connector

...

JTAG Interface

According to the JTAGEN and JTAGSEL[1..0] pins the management Intel MAX10 (U41), the Intel Cyclone V HPS (U10), the Intel Cyclone V FPGA (U10) or the FMC (J4) can be accessed via the micro USB B connector J13.

...

anchor	Table_SIP_JTG
title	JTAG pins connection

...

JTAGSEL1

...

JTAGSEL1

...

FAN Connector

...

P0_IO1	Pin AD9	--
2	P0_IO2	Pin AD11	--
3	P0_IO3	Pin AD12	--
4	P0_IO4	Pin AC12	--
7	P0_IO5	Pin AC9	--
8	P0_IO6	Pin AD10	--
9	P0_IO7	Pin AA12	--
10	P0_IO8	Pin AB12	--
Pmod Connector P2 Pin	Signal Schematic Name	Connected to Intel Cyclone V, U10	Notes
1	P1_IO1	Pin AG2	--
2	P1_IO2	Pin AF4	--
3	P1_IO3	Pin AF8	--
4	P1_IO4	Pin AD7	--
7	P1_IO5	Pin AG1	--
8	P1_IO6	Pin AF5	--
9	P1_IO7	Pin AE7	--
10	P1_IO8	Pin AE9	--
Pmod Connector P3 Pin	Signal Schematic Name	Connected to Intel Cyclone V, U10	Notes
1	P2_IO1	Pin AH5	--
2	P2_IO2	Pin AH3	--
3	P2_IO3	Pin AJ2	--
4	P2_IO4	Pin AG3	--
7	P2_IO5	Pin AG5	--
8	P2_IO6	Pin AH4	--
9	P2_IO7	Pin AH2	--
10	P2_IO8	Pin AJ1	--
Pmod Connector P4 Pin	Signal Schematic Name	Connected to Intel Cyclone V, U10	Notes
1	P3_IO1	Pin AE12	--
2	P3_IO2	Pin AF9	--
3	P3_IO3	Pin AG8	--
4	P3_IO4	Pin AG6	--
7	P3_IO5	Pin AE11	--
8	P3_IO6	Pin AF10	--
9	P3_IO7	Pin AG7	--
10	P3_IO8	Pin AF6	--

SMA Connector

The TEI0022 board offers up to seven SMA connectors for trigger and clock input and output.

Scroll Title

anchor	Table_SIP_

...

SMA connectors

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

SMA Connector	Signal Schematic Names	Connected to	Notes

...

FAN_EN,

(High Side Switch U55, Pin 3)

...

J7	SMA_CLK_OUT_p	Clock Generator U3, Pin 22	Assembly option
J10	SMA_CLK_OUT_n	Clock Generator U3, Pin 21	Assembly option
J8	TRIGGER_OUTPUT	Intel Cyclone V U10, Pin AE29	--
J9	TRIGGER_INPUT	Intel Cyclone V U10, Pin AA26	--
J15	EXT_CLK_INPUT	Intel Cyclone V U10, Pin Y26	--
J17	CLK_INPUT	Intel Cyclone V U10, Pin AD29	--
J18	SMA_CLK_IN	Clock Generator U3, Pin 1	Assembly option

FAN Connector

The TEI0022 board offers a FAN connector for cooling the FPGA device. Depending on the assembly 5 V or 12 V are usable.

Scroll Title

anchor	Table_SIP_FAN
title	FAN connectors

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector

Signal Schematic Names

Connected to

Notes

2-Pin FAN Connector J16, 5 V or 12 V power supply depending on R270/271 with BTS4141N High Side Switch U55

FAN_EN,

(High Side Switch U55, Pin 3)

Intel MAX10 U41, Pin D13

Intel Cyclone V cooling FAN

Micro USB Connector (JTAG)
Anchor
JTAG
JTAG

According to the JTAGEN and JTAGSEL[1..0] pins the management controller Intel MAX10 (U41), the Intel Cyclone V HPS (U10), the Intel Cyclone V FPGA (U10) or the FMC (J4) can be accessed via the micro USB B connector J13.

JTAG access is controlled by the DIP switches S7 and S8 on the module TEI0022. Please note that the DIP Switches are active low.

SMA Connector

The TEI0022 board offers seven SMA connectors for trigger and clock input and output.

...

anchor	Table_SIP_SMA
title	SMA connectors

...

SMA Connector

...

Connected to

...

J15

...

SD Card Connector

SD Card connector J3 is connected to the Intel Cyclone V.

On-board Peripherals

Page properties

hidden	true
id	Comments

Notes :

add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs

...

hidden	true
id	Comments

Notes :

...

Temperatur Sensor

The temperature sensor ADT7410 (U16) is implemented on the TEI0022 board.

UART Interface

...

ON	OFF	OFF	Intel Cyclone V FPGA	--
OFF	ON	OFF	FMC	--

Scroll Title

anchor	Figure_OV_JTAG
title	TEI0022 JTAG

Scroll Ignore

draw.io Diagram

border	false
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	2
diagramName	Figure_OC_JTAG
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	625

Scroll Only
Image Added

Micro USB Connector (UART)
Anchor
UART
UART

A UART connection between the USB B connector J5 and the Intel Cyclone HPS U10 is possible via the FT234XD (U30) chip.

Quad SPI Flash Memory

Page properties

hidden	true
id	Comments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.

Two 256 Mbit (32 MByte) Quad SPI Flash Memory (Micron MT25QL256ABA8E12, U6, U15) are provided for FPGA and HPS configuration file storage. After configuration process completes the remaining free memory can be used for application data storage. All four SPI data lines are connected to the FPGA or the HPS allowing x1, x2 or x4 data bus widths to be used. The maximum data transfer rate depends on the bus width and clock frequency.

...

USB Connector

On the TEI0022 board there are up to four USB 2.0 Hi-Speed ports available (J2, J12).

HDMI Connector

The TEI0022 provides an HDMI Connector J11.

SD Card Connector

SD Card connector J3 is connected to the Intel Cyclone V U10.

RJ45 Connector

The board TEI0022 provides an ethernet interface via the RJ45 connector J1.

I2C

The TEI0022 provides three independent I2C busses. One bus is used to connect the FMC I2C with the Intel Cyclone V HPS. The second bus is used to connect the HDMI device to the Intel Cyclone V FPGA. The third bus is used to handle the other on-board I2C devices. Via assembly option, it is possible to connect bus two to bus three.

Scroll Title

anchor	Table_OBP_I2C
title	On-board peripherals' I2C-interfaces device slave addresses

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Bus	I2C Device	Designator	I2C Address	Schematic Names of I2C Bus Lines	Notes
HPS I2C	Temperature Sensor	U16	0x4A	HPS_I2C_SCL / HPS_I2C_SDA	3.3 V reference voltage
HPS I2C	Programmable Clock Generator	U3	0x70	HPS_I2C_SCL / HPS_I2C_SDA	3.3 V reference voltage
HPS I2C	EEPROM	U38	0x50	HPS_I2C_SCL / HPS_I2C_SDA	3.3 V reference voltage
HDMI I2C	HDMI	U23	0x72	HDMI_I2C_SCL / _I2C_SDA	3.3 V reference voltage
HPS FMC I2C	FMC	J4	0x50	FMC_SCL / FMC_SDA	3.3 V reference voltage

Scroll Title

anchor	Figure_OV_I2C
title	TEI0022 I2C

Scroll Ignore

draw.io Diagram

border	false
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	5
diagramName	Figure_OV_I2C
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	541

Scroll Only
Image Added

On-board Peripherals

Scroll Ignore

scroll-viewport	true
scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Example:

Chip/Interface	Designator	Connected To	Notes
ETH PHY	U10	B2B connector J1 SoC MIO	Gigabit ETH PHY

Page properties

hidden	true
id	Comments

For example subsections see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

Scroll Title

anchor	Table_OBP
title	On board peripherals

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Chip/Interface	Designator	Notes
System Controller Intel MAX10	U41	--
Intel Cyclone V	U10	--
DDR3 SDRAM	U26...29	--
Gigabit Ethernet PHY	U1	--
High-Speed USB ULPI PHY	U8	--
4-Port USB 2.0 Hub	U33	--
HDMI Transmitter	U23	--
FTDI (JTAG)	U21	--
FTDI (UART)	U30	--
DIP-Switches	S2, S7...8	--
Buttons	S1, S3...5	--
On-Board LEDs	D1...15, D17...23, D25	--
Temperature Sensor	U16	--
QSPI	U6, U15	--
EEPROM	U31, U38	--
Clock Sources	U32, U34, U48	--
Programmable Clock Generator	U3	--
Power Monitoring	U54	--

System Controller Intel MAX 10

The TEI0022 is equipped with an Intel MAX 10 (U41) which is the central system management unit where essential control signals are logically linked by the implemented logic of the FPGA firmware. This generates output signals to control the system, the on-board peripherals and the interfaces. Interfaces like JTAG are by-passed, forwarded and controlled by the System Controller. Other tasks of the System Controller are the monitoring of the power-on sequence and configuration of the Intel Cyclone V FPGA. The functionalities and configuration of the pins depend on its firmware.

Intel Cyclone V

The Intel Cyclone V device used at the TEI0022 board is a SoC with integrated ARM-based HPS. The 5CSEMA5F31C8N version delivers one hard memory controller, 80K logic elements in an FineLineBGA (FBGA) with 896 pins for the commercial temperature range of TJ = 0...85 °C with speed grade eight.

DDR3 SDRAM

Page properties

hidden	true
id	Comments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TEI0022 SoM has one GByte volatile DDR3 SDRAM memory per FPGA (U26, U27) and HPS (U28, U29) for storing user application code and data.

Part number: IS43TR16256BL-125KBLI
Supply voltage: 1.5 V
Speed: TBD
Temperature: TC = -40 °C up to 95 °C

Gigabit Ethernet PHY

On-board Gigabit Ethernet PHY (U1) is provided with Analog Devices ADIN1300. The Ethernet PHY RGMII interface is connected to the Intel Cyclone V HPS. I/O voltage is fixed at 3.3 V. The reference clock input of the PHY is supplied from the on-board 25.0 MHz oscillator (U48).

Scroll Title

anchor	Table_OBP_ETH
title	Ethernet PHY to HPS connections

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Bank	Signal Name	Signal Description
7B	ETH_TXCK	RGMII Transmit Reference Clock
7B	ETH_TXD0	RGMII Transmit Data 0
7B	ETH_TXD1	RGMII Transmit Data 1
7B	ETH_TXD2	RGMII Transmit Data 2
7B	ETH_TXD3	RGMII Transmit Data 3
7B	ETH_TXCTL	RGMII Transmit Control
7B	ETH_RXCK	RGMII Receive Reference Clock
7B	ETH_RXD0	RGMII Receive Data 0
7B	ETH_RXD1	RGMII Receive Data 1
7B	ETH_RXD2	RGMII Receive Data 2
7B	ETH_RXD3	RGMII Receive Data 3
7B	ETH_RXCTL	RGMII Receive Control
7C	ETH_RST	Reset
7B	ETH_MDC	Management Data Clock
7B	ETH_MDIO	Management Data I/O
7B	PHY_INT	Interrupt

High-Speed USB ULPI PHY

USB PHY (U8) is provided by USB3320C from Microchip. The ULPI interface is connected to the Intel Cyclone V HPS. I/O voltage is fixed at 3.3 V and PHY reference clock input is supplied from the on-board 24.0 MHz oscillator (U34).

Scroll Title

anchor	Table_OBP_

...

PHY Pin	Connected to	Notes
ULPI	Intel Cyclone V HPS (U10)	--
REFCLK	24 MHz from on board oscillator (U34)	--
REFSEL[0..2]	High (3.3 V)	--
RESETB	Intel Cyclone V HPS (U10) and Intel MAX 10 (U41)	--
DP, DM	4-port USB 2.0 Hub (U33)	--
CPEN	Not Connected.	--
VBUS	Pull-up to 5 V.	--
ID	Not Connected.	--

4-Port USB 2.0 Hub

On the TEI0022 board there are up to four USB 2.0 Hi-Speed ports available (J2, J12). The USB 2.0 ports are provided by Microchip Cypress USB2514B 4-port USB 2.0 Hub controller (U33) which is connected to the USB PHY USB3320C (U8) connected to the Intel Cyclone V HPS via ULPI.

HDMI Transmitter

The TEI0022 board provides an HDMI interface routed to the Intel Cyclone FPGA (U10). The HDMI interface is created by the HDMI transmitter ADV7511 provided by Analog Devices. The HDMI transmitter is incorporated in conjunction with the HDMI protection circuit TI TPD12S016 for more signal robustness.

Scroll Title

anchor	Table_OBP_

...

Intel Cyclone V

The on TEI0022 board used Intel Cyclone V device is a SoC with integrated Arm-based HPS. The 5CSEMA5F31C8N version delivers one hard memory controller, 80K logic elements in an FineLineBGA (FBGA) with 896 pins for the commercial temperature range of TJ = 0...85 °C with speed grade eight.

Programmable Clock Generator

...

	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

HDMI connector J11	Signal Schematic Name	Connected to	Notes
Pin 1, 3	HDMI_TX2_P / HDMI_TX2_N	HDMI transmitter, Pin 43, 42	also connected to HDMI protection circuit
Pin 4, 6	HDMI_TX1_P / HDMI_TX1_N	HDMI transmitter, Pin 40, 39	also connected to HDMI protection circuit
Pin 7, 9	HDMI_TX0_P / HDMI_TX0_N	HDMI transmitter, Pin 36, 35	also connected to HDMI protection circuit
Pin 10, 12	HDMI_TXC_P / HDMI_TXC_N	HDMI transmitter, Pin 33, 32	also connected to HDMI protection circuit
Pin 13	CEC_B	HDMI transmitter, Pin 48	HDMI CEC, wired through HDMI protection circuit
Pin 15	SCL_B	HDMI transmitter, Pin 53	HDMI I²C clock line, wired through HDMI protection circuit
Pin 16	SDA_B	HDMI transmitter, Pin 54	HDMI I²C data line, wired through HDMI protection circuit
Pin 19	HPD_B	HDMI transmitter, Pin 30	Hot Plug Detect, wired through HDMI protection circuit
Pin 18	5V_HDMI	HDMI protection circuit, Pin 13	5V supply voltage, wired through HDMI protection circuit

FTDI (JTAG)

Please refer to the section "Micro USB Connector (JTAG)".

FTDI (UART)

Please refer to the section "Micro USB Connector (UART)".

DIP-Switches

There are three 4-bit DIP-switches present on the TEI0022 board to configure options and set parameters. The following section describes the functionalities of the particular switches.

DIP-Switch S2

The table below describes the functionalities of the switches of DIP-switch S2 at their single positions:

Scroll Title

anchor	Table_OBP_DIP_

...

IN1

...

IN3

...

Reference input clock

...

IN4

...

IN5

...

-

...

I²C interface muxed to Intel Cyclone V

Slave address: 0x70.

...

I²C interface muxed to Intel Cyclone V

Slave address: 0x70.

...

CLK0A/B

...

SMA_CLK_OUT_p/n

...

Clock to SMA connectors

...

CLK1A/B

...

Clock to Intel MAX10 bank 2

...

CLK_B4A_p/n

...

Clock to FPGA bank 4A

Oscillators

...

DIP-switch S2	Position ON	Position OFF	Notes
S4-1	HPS_SW1 is low	HPS_SW1 is high	User switch
S4-2	HPS_SW2 is low	HPS_SW2 is high	User switch
S4-3	FPGA_SW1 is low	FPGA_SW1 is high	User switch
S4-4	FPGA_SW2 is low	FPGA_SW2 is high	User switch

DIP-Switch S7

The table below describes the functionalities of the switches of DIP-switch S7 at their single positions:

Scroll Title

anchor	Table_OBP_DIP_S7
title	DIP-switch S7 functionality description

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

DIP-switch S7	Position ON	Position OFF	Notes
S7-1	HPS_SPI_SS/BOOTSEL0 is low	HPS_SPI_SS/BOOTSEL0 is high	Boot select (Firmware dependent)
S7-2	QSPI_CS/BOOTSEL1 is low	QSPI_CS/BOOTSEL1 is high	Boot select (Firmware dependent)
S7-3	JTAGSEL0 is low	JTAGSEL0 is high	JTAG select (Firmware dependent)
S7-4	JTAGSEL1 is low	JTAGSEL1 is high	JTAG select (Firmware dependent)

DIP-Switch S8

The table below describes the functionalities of the switches of DIP-switch S8 at their single positions:

Scroll Title

anchor	Table_OBP_DIP_

...

I2C

...

DIP-switch S8	Position ON	Position OFF	Notes
S8-1	VID0_SW is low	VID0_SW is high	FMC_VADJ selection (Firmware dependent)
S8-2	VID1_SW is low	VID1_SW is high	FMC_VADJ selection (Firmware dependent)
S8-3	VID2_SW is low	VID2_SW is high	FMC_VADJ selection (Firmware dependent)
S8-4	JTAGEN is high	JTAGEN is low	JTAG select

Buttons

There are four buttons present on the TEI0022 board. The following section describes the functionalities of the particular buttons. The final functionality is set by the management Intel MAX10.

Scroll Title

anchor	Table_OBP_DIP_

...

System Controller Intel MAX10

The TEI0022 is equipped with an Intel MAX10 (U41) which is the central system management unit where essential control signals are logically linked by the implemented logic of the FPGA firmware. This generates output signals to control the system, the on-board peripherals and the interfaces. Interfaces like JTAG and buttons between the on-board peripherals and to the FPGA-module are by-passed, forwarded and controlled by the System Controller. Other tasks of the System Controller are the monitoring of the power-on sequence and configuration of the Intel Cyclone V FPGA. The functionalities and configuration of the pins depend on its firmware.

EEPROM

...

Position ON	Position OFF	Notes
S1	HPS_RST#_SW is low	HPS_RST#_SW is high	Reset (cold) the Intel Cyclone V HPS (Firmware dependent)
S3	HPS_WARM_RST#_SW is low	HPS_WARM_RST#_SW is high	Reset (warm) the Intel Cyclone V HPS (Firmware dependent)
S4	FPGA_RST#_SW is low	FPGA_RST#_SW is high	Reset the Intel Cyclone V FPGA (Firmware dependent)
S5	USER_BTN_SW is low	USER_BTN_SW is high	User button (Firmware dependent)

On-Board LEDs

The TEI0022 board is equipped with several LEDs to signal current states and activities. The functionality of the LEDs D11...14 are user LEDs. The LED D8 shows the Intel Cyclone V configuration progress. LEDs D15, D18...19 shows the UART connection and the other LEDs mentioned in the table are supply power status LEDs.

Scroll Title

anchor	Table_OBP_

...

High-Speed USB ULPI PHY

USB PHY (U8) is provided by USB3320C from Microchip. The ULPI interface is connected to the Intel Cyclone V HPS. I/O voltage is fixed at 3.3 V and PHY reference clock input is supplied from the on-board 24.0 MHz oscillator (U34).

...

anchor	Table_OBP_USB_PHY
title	USB PHY interface connections

...

4-Port USB 2.0 Hub

On the TEI0022 board there are up to four USB 2.0 Hi-Speed ports available (J2, J12). The USB 2.0 ports are provided by Microchip Cypress USB2514B 4-port USB 2.0 Hub controller (U33) which is connected to the USB PHY USB3320C (U8) connected to the Intel Cyclone V HPS via ULPI.

Buttons

There are four buttons present on the TEI0022 board. The following section describes the functionalities of the particular buttons. The final functionality is set by the management Intel MAX10.

...

anchor	Table_OBP_DIP_Buttons
title	Buttons functionality description

...

Designator	Color	Connected to	Active Level	Note
D11	Green	Intel Cyclone V HPS	H	User LED
D12	Green	Intel Cyclone V HPS	H	User LED
D13	Green	Intel Cyclone V FPGA	H	User LED
D14	Green	Intel Cyclone V FPGA	H	User LED
D8	Green	Intel Cyclone V FPGA, Intel MAX 10	L	Status: Configuration "Done"
D15	Green	FT234XD	L	UART
D18	Green	UART TX	L	UART
D19	Green	UART RX	L	UART
D21	Green	+12.0V	H	Status of +12.0V voltage rail
D1	Green	+12.0V_FMC	H	Status of +12.0V_FMC voltage rail
D2	Green	+5.0V	H	Status of +5.0V voltage rail
D3	Green	+3.3V	H	Status of +3.3V voltage rail
D20	Green	+3.3V_MAX10	H	Status of +3.3V_MAX10 voltage rail
D22	Green	+3.3V_FMC	H	Status of +3.3V_FMC voltage rail
D4	Green	+2.5V	H	Status of +2.5V voltage rail
D5	Green	Intel MAX 10	H	Status of +1.8V voltage rail
D7	Green	Intel MAX 10	H	Status of VCC voltage rail
D9	Green	Intel MAX 10	H	Status of FMC_VADJ voltage rail
D6	Green	Intel MAX 10	H	Status of VDD_DDR_FPGA voltage rail
D23	Green	Intel MAX 10	H	Status of VDD_DDR_HPS voltage rail
D17	Green	Intel MAX 10	H	Status of VTT_DDR_FPGA voltage rail
D10	Green	Intel MAX 10	H	Status of VTT_DDR_HPS voltage rail
D25	Red	Intel MAX 10	H	Status

Temperature Sensor

The temperature sensor ADT7410 (U16) is implemented on the TEI0022 board.

Quad SPI Flash Memory

Page properties

hidden	true
id	Comments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.

Two 256 Mbit (32 MByte) Quad SPI Flash Memory (Micron MT25QL256ABA8E12, U6, U15) are provided for FPGA and HPS configuration file storage. After configuration process completes the remaining free memory can be used for application data storage. All four SPI data lines are connected to the FPGA or the HPS allowing x1, x2 or x4 data bus widths to be used. The maximum data transfer rate depends on the bus width and clock frequency.

Quad SPI Flash memory U6 is connected to the HPS bank 7B and U15 to FPGA bank 3A.

DIP-Switches

There are three 4-bit DIP-switches present on the TEI0022 board to configure options and set parameters. The following section describes the functionalities of the particular switches.

DIP-Switch S2

...

DIP-Switch S7

The table below describes the functionalities of the switches of DIP-switch S7 at their single positions:

...

Signal Name	QSPI Flash Memory U6 Pin	FPGA Pin
QSPI_CS/BOOTSEL1	S#, Pin C2	Bank 7B, Pin A18
QSPI_CLK	C, Pin B2	Bank 7B, Pin D19
QSPI_DATA0	DQ0, Pin D3	Bank 7B, Pin C20
QSPI_DATA1	DQ1, Pin D2	Bank 7B, Pin H18
QSPI_DATA2	DQ2, Pin C4	Bank 7B, Pin A19
QSPI_DATA3	DQ3, Pin D4	Bank 7B, Pin E19

...

DIP-Switch S8

...

Signal Name	QSPI Flash Memory U15 Pin	FPGA Pin
nCSO	S#, Pin C2	Bank 3A, Pin AB8
AS_DCK	C, Pin B2	Bank 3A, Pin U7
AS_DATA0	DQ0, Pin D3	Bank 3A, Pin AE6
AS_DATA1	DQ1, Pin D2	Bank 3A, Pin AE5
AS_DATA2	DQ2, Pin C4	Bank 3A, Pin AE8
AS_DATA3	DQ3, Pin D4	Bank 3A, Pin AC7

EEPROM

The TEI0022 board contains two EEPROMs for configuration and general user purposes.

Scroll Title

anchor	Table_OBP_

...

On-Board LEDs

...

I/OT	0x50	U38	2 KBit	Ethernet MAC	--
93AA56BT-I/OT	-	U31	2 KBit	JTAG Configuration	--

Clock Sources

The board has following reference clocking sources provided by on-board oscillators:

Scroll Title

anchor	Table_OBP_

...

DDR3 SDRAM

Page properties

hidden	true
id	Comments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TEI0022 SoM has one GByte volatile DDR3 SDRAM memory per FPGA (U26, U27) and HPS (U28, U29) for storing user application code and data.

Part number: IS43TR16512BL-125KBLI
Supply voltage: 1.35 V
Speed: ???
Temperature: TC = -40 °C up to 95 °C

Gigabit Ethernet PHY

On-board Gigabit Ethernet PHY (U1) is provided with Analog Devices ADIN1300. The Ethernet PHY RGMII interface is connected to the Intel Cyclone V HPS. I/O voltage is fixed at 3.3 V. The reference clock input of the PHY is supplied from the on-board 25.0 MHz oscillator (U48).

...

anchor	Table_OBP_ETH
title	Ethernet PHY to HPS connections

...

ETH_TXCTL

...

ETH_RXCTL

...

HDMI Connector

The TEI0022 board provides an HDMI interface routed to the Intel Cyclone FPGA (U10). The HDMI interface is created by the HDMI transmitter ADV7511 provided by Analog Devices. The HDMI transmitter is incorporated in conjunction with the HDMI protection circuit TI TPD12S016 for more signal robustness.

...

anchor	Table_OBP_HDMI
title	HDMI connector signals and pins

...

HDMI transmitter, Pin 40, 39

...

also connected to HDMI protection circuit

...

	true

Clock Source	Frequency	Signal Schematic Name	Clock Destination	Notes
U48, SiT8208AI	25.0 MHz	CLK_25MHz_R	Si5338A PLL U3, Pin 3 (IN3)	--
		HPS_CLK1_25MHz	HPS Bank 7A U10, Pin D25	--
		ETH_XTAL_IN	ETH PHY U1, Pin 9	--
U32, SiT8208AI	12.0 MHz	OSCI	FT2232H U21, Pin 3	--
U34, SiT8008BI	24.0 MHz	USB_CLK24_HUB	USB Hub U33, Pin 33	--
U34, SiT8008BI	24.0 MHz	USB_CLK24_PHY	USB PHY U8, Pin 26	--

Programmable Clock Generator

There is a Silicon Labs I²C programmable quad PLL clock generator on-board (Si5338A, U3) to generate various reference clocks for the module. The I²C Address is 0x70.

Scroll Title

anchor	Table_OBP_PLL
title	Programmable quad PLL clock generator inputs and outputs

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Si5338A Pin	Signal	Connected to	Direction	Default frequency	IO Standard	Notes
IN1	SMA_CLK_IN	SMA J18, Pin 1	Input	--	--	Assembly option dependent
IN2	SMA_CLK_IN	SMA J18, Pin 1	Input	--	--	Assembly option dependent
IN3	CLK_25MHz_R	U48, Pin 3	Input	25MHz	--	Reference input clock
IN4	--	GND	Input	--	--	I²C slave device address LSB
IN5	--	Not Connected	Input	--	--	Not used
IN6	--	GND	Input	--	--	Not used
SCL	HPS_I2C_SCL	Cyclone V Bank 7A/Pin H23	Input	--	--	I²C interface
SDA	HPS_I2C_SDA	Cyclone V Bank 7A/Pin A25	Input / Output	--	--	I²C interface
CLK0A/B	SMA_CLK_OUT_p/n	SMA, J7/J10	Output	50MHz	LVDS 3.3V	Assembly option dependent
CLK1A/B	CLK_B3B_p/n	Cyclone V FPGA Bank 3B/Pin AF14/AF15	Output	50MHz	LVDS 1.8V	--
CLK2A	CLK_MAX10	MAX10 Bank 2/Pin H6	Output	25MHz	CMOS 3.3V	--
CLK2B	HPS_CLK2	Cyclone V HPS Bank 7A/Pin F25	Output	25MHz	CMOS 3.3V	--
CLK3A/B	CLK_B4A_p/n	Cyclone V FPGA Bank 4A/Pin AA16/AB17	Output	50MHz	LVDS 1.8V	--

Power Monitoring

The TEI0022 uses a precision supply monitor (U54) for three voltages. Therefore, if one of the voltages browns out it should be realized and handled.

Power and Power-On Sequence

Scroll Ignore

scroll-viewport	true
scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Enter the default value for power supply and startup of the module here.

Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

Power Supply

The maximum power consumption of this board mainly depends on the design which is running on the FPGA. Intel provides power estimator excel sheets to calculate power consumption.

Power Consumption

Scroll Title

anchor	Table_PWR_PC
title	Power Consumption

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Input Pin	Typical Current
+12.0V_IN	TBD*

* TBD - To Be Determined

Power Distribution Dependencies

All on-board voltages of the TEI0022 are generated out of the extern applied 12 V power supply.

There are following dependencies how the initial 12V power supply is distributed to the on-board DC-DC converters, which power up further DCDC converters and the particular on-board voltages:

Scroll Title

anchor	Figure_PWR_PD
title	Power Distribution

Scroll Ignore

draw.io Diagram

border	true
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	7
diagramName	Figure_PWR_PD
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	641

Scroll Only
Image Added

Power-On Sequence

The following figures delivers the power-on sequence information. The figure Power Sequency shows the connections between the power devices and its management. The figure Suggested Power Sequency shows the recommended firmware power-on sequence. For more information about firmware depended power-on sequencing see TEI0022 Intel MAX 10 → Power mangement.

Scroll Title

anchor	Figure_PWR_PS
title	Power Sequency

Scroll Ignore

draw.io Diagram

border	false
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	8
diagramName	Figure_PWR_PS
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	416

Scroll Only
Image Added

Scroll Title

anchor	Figure_PWR_PS_Suggested
title	Suggested Power Sequency

Scroll Ignore

draw.io Diagram

border	true
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	3
diagramName	Figure_PWR_PS_Suggested
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	464

Scroll Only
Image Added

Voltage Monitor Circuit

The voltages +3.3V, +5.0V, and VCC are monitored by the voltage monitor circuit LTC2911 (U54), which generates a reset signal at power-on. A manual reset is also possible as described in the reset table.

Scroll Title

anchor	Figure_PWR_VMC
title	Voltage Monitor Circuit

Scroll Ignore

draw.io Diagram

border	true
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	2
diagramName	Figure_PWR_VMC
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	661

Scroll Only
Image Added

Bank Voltages

Scroll Title

anchor	Table_PWR_BV
title	Intel Cyclone V SoC bank voltages.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Bank	Schematic Name	Voltage	Notes
Bank 3A	+3.3V	+3.3 V	--
Bank 3B	VDD_DDR_FPGA	+1.5 V	--
Bank 4A	VDD_DDR_FPGA	+1.5 V	--
Bank 5A	+3.3V	+3.3 V	--
Bank 5B	+3.3V	+3.3 V	--
Bank 6A	VDD_DDR_HPS	+1.5 V	--
Bank 6B	VDD_DDR_HPS	+1.5 V	--
Bank 7A	+3.3V	+3.3 V	--
Bank 7B	+3.3V	+3.3 V	--
Bank 7C	+3.3V	+3.3 V	--
Bank 7D	+3.3V	+3.3 V	--
Bank 8A	FMC_VADJ	+3.3 V, +2.5 V, +1.8 V, +1.25 V, +1.2 V	Adjustable voltage (+0.8 V is not usable at the Intel Cyclone V)
Bank 9A	+3.3V	+3.3 V	--

Technical Specifications

Scroll Ignore

scroll-viewport	true
scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

List of all Powerrails which are accessible by the customer

Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)

Power and Power-On Sequence

...

hidden	true
id	Comments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

Power on-sequence
Power distribution
Voltage monitoring circuit

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Power Supply

The maximum power consumption of this board mainly depends on the design which is running on the FPGA. Intel provides a power estimator excel sheets to calculate power consumption.

Power Consumption

...

anchor	Table_PWR_PC
title	Power Consumption

...

* TBD - To Be Determined

Power Distribution Dependencies

All on-board voltages of the TEI0022 are generated out of the extern applied 12 V power supply.

There are following dependencies how the initial 12V power supply is distributed to the on-board DC-DC converters, which power up further DCDC converters and the particular on-board voltages:

...

anchor	Figure_PWR_PD
title	Power Distribution

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Power-On Sequence

...

anchor	Figure_PWR_PS
title	Power Sequency

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Voltage Monitor Circuit

The voltages +3.3V, +5.0V, and VCC are monitored by the voltage monitor circuit LTC2911 (U54), which generates the a reset signal at power-on. A manual reset is also possible as described in the reset table.

...

anchor	Figure_PWR_VMC
title	Voltage Monitor Circuit

...

anchor	Figure_PWR_VMC
title	Voltage Monitor Circuit

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Power Rails

...

anchor	Table_PWR_PR
title	Module power rails.

...

B2B Connector

JM1 Pin

...

B2B Connector

JM2 Pin

...

B2B Connector

JM3 Pin

...

Bank Voltages

...

anchor	Table_PWR_BV
title	Zynq SoC bank voltages.

...

Bank

...

Voltage

...

hidden	true
id	Comments

...

use "include page" macro and link to the general B2B connector page of the module series,

...

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)
Operating Temperature: -??°C ~ ??°C
Current Rating: ??A per ContactNumber of Positions: ??
Number of Rows: ??

...

Absolute Maximum Ratings

Scroll Title

anchor	Table_TS_AMR
title	PS absolute maximum ratings

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Symbols	Description	Min	Max	Unit

...

V

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Scroll Title

anchor	Table_TS_ROC
title	Recommended operating conditions.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Parameter	Min	Max	Units	Reference Document
+12.0V_IN	10.5	13	V

...

Physical Dimensions

Module size: ?? mm × ?? mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: ? mm.

PCB thickness: ?? mm.

...

hidden	true
id	Comments

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Input power protection U42

Physical Dimensions

Module size: 160 mm × 130 mm. Please download the assembly diagram for exact numbers.

PCB thickness: 1.9 mm.

Page properties

hidden	true
id	Comments

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Scroll Title

anchor	Figure_TS_PD
title	Physical Dimension

Scroll Ignore

draw.io Diagram

border	true
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	4
diagramName	Figure_TS_PD
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	584

Scroll Only

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Image Added

Currently Offered Variants

Scroll Ignore

scroll-viewport	true

...

anchor	Figure_TS_PD
title	Physical Dimension

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

...

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Currently Offered Variants

Page properties

hidden	true
id	Comments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0728:

ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

For Baseboards or modules, where no overview page is available (and revision number is coded in the direct link) use shop search link, e.g. TE0706:

ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706

Scroll Title

anchor	Table_VCP_SO
title	Trenz Electronic Shop Overview

Scroll Table Layout

sortEnabled
orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1

...

	false
cellHighlighting	true

Trenz shop TEI0022 overview page
English page	German page

Revision History

Scroll Ignore

scroll-viewport	true
scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

...

Carrier, e.g. TE0706 REV02:

TE0706-02 -> https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/Documents

Note:

Date format: YYYY-MM-DD
Example:
Date Revision Changes Documentation Link
2020-11-25 REV02
Resistors R14 and R15 was replaced by 953R (was 5K1)
Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
REV02

Scroll Title

anchor	Table_RH_HRH
title	Hardware Revision History

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Revision	Changes	Documentation Link
-	03	Refer to the "Revision_Changes" schematic page
-	02	Refer to the "Revision_Changes" schematic page

...

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

...

draw.io Diagram

border	true
viewerToolbar	true

fitWindow	false
diagramDisplayName
lbox	true
revision	3
diagramName	Figure_RV_HRN
simpleViewer	true
width
links	auto
tbstyle	top
diagramWidth	305

Scroll Only
Image Added

Document Change History

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

Scroll Title

anchor	Table_RH_DCH
title	Document change history.

Scroll Table Layout

repeatTableHeaders
orientation	portrait
sortDirection	ASC

...

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date

Revision

Contributor

Description

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

Page info

infoType	Current version
prefix	v.
type	Flat
showVersions	false

Page info

infoType	Modified by
type	Flat
showVersions	false

add default frequency and IO Standard to 'Programmable Clock Generator'
Style update

2022-06-15

v.55

Thomas Dück

typo correction

2020-11-03

v.52

ED

Update TRM to REV03

2020-06-03

v.48

TD

Chapter 'Power-On Sequence' updated

2020-02-26

v.47

ED

Update TRM to REV02

--

all

...

infoType	Modified by
type	Flat
showVersions	false

...

change list

...

--

...

all

...

Page info

infoType	Modified users
type	Flat
showVersions	false

...

--

...

Include Page

	IN:Legal Notices
	IN:Legal Notices

Scroll Only

HTML
<style> .wiki-content .columnLayout .cell.aside { width: 0%; }</style>

Scroll pdf ignore

Custom_fix_page_content

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 18

New Version Current

Key

Overview

Overview

Key Features

Block Diagram

Block Diagram

Main Components

Initial Delivery State

Initial Delivery State

Configuration Signals

Signals, Interfaces and Pins

Pmod Connector

FMC LPC Connector

FMC LPC Connector

Pmod Connector

JTAG Interface

FAN Connector

SMA Connector

FAN Connector

Micro USB Connector (JTAG) AnchorJTAGJTAG

SMA Connector

SD Card Connector

On-board Peripherals

Temperatur Sensor

UART Interface

Micro USB Connector (UART) AnchorUARTUART

Quad SPI Flash Memory

USB Connector

HDMI Connector

SD Card Connector

RJ45 Connector

I2C

On-board Peripherals

System Controller Intel MAX 10

Intel Cyclone V

DDR3 SDRAM

Gigabit Ethernet PHY

High-Speed USB ULPI PHY

4-Port USB 2.0 Hub

HDMI Transmitter

Intel Cyclone V

Programmable Clock Generator

FTDI (JTAG)

FTDI (UART)

DIP-Switches

Oscillators

I2C

Buttons

System Controller Intel MAX10

EEPROM

On-Board LEDs

High-Speed USB ULPI PHY

4-Port USB 2.0 Hub

Buttons

Temperature Sensor

Quad SPI Flash Memory

DIP-Switches

EEPROM

On-Board LEDs

Clock Sources

DDR3 SDRAM

Gigabit Ethernet PHY

HDMI Connector

Programmable Clock Generator

Power Monitoring

Power and Power-On Sequence

Power Supply

Power Consumption

Power Distribution Dependencies

Power-On Sequence

Voltage Monitor Circuit

Bank Voltages

Technical Specifications

Power and Power-On Sequence

Power Supply

Micro USB Connector (JTAG)
Anchor
JTAG
JTAG

Micro USB Connector (UART)
Anchor
UART
UART