You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Table of contents

Overview

Firmware for PCB-Master CPLD with designator U17. CPLD Device: LCMX02-1200HC

Feature Summary

Firmware Revision and supported PCB Revision

See Document Change History

Product Specification

Port Description

NameDirectionPinDescriptionPCB REV2 Exception
C_T1 24/ currently_not_usedNC
C_T2 26/ currently_not_usedNC
C_T3 25/ currently_not_usedNC
C_TCK         131/ currently_not_used 
C_TDI         136/ currently_not_used 
C_TDO1        137/ currently_not_used 
C_TMS         130/ currently_not_used 
CAN_FAULT    in106  
CAN_RX       in107  
CAN_S        out105  
CAN_TX       out104  
CLK_125MHZ / PHY_CLKin70  
CON_NTRST     117/ currently_not_used 
CON_RTCK / JTAG_RTCK    out125  
CON_SRST / JTAG_SRSTin127  
CON_TCK / JTAG_TCKin122  
CON_TDI / JTAG_TDIin119  
CON_TDO / JTAG_TDOout126  
CON_TMS / JTAG_TMSin121  
DIR_T1 23/ currently_not_usedNC
DIR_T2 28/ currently_not_usedNC
DIR_T3 27/ currently_not_usedNC
DP_AUX_DE   / DP_DE out92  
DP_AUX_RX   / DP_RXin91  
DP_AUX_TX    / DP_TXout93  
DP_EN        out77  
DP_TX_HPD  /DP_HDP in94  
ETH_RST      out62  
EX_IO1        112/ currently_not_used 
EX_IO2        113/ currently_not_used 
EX_IO3        114/ currently_not_used 
EX_IO4        115/ currently_not_used 
F2_EN         19/ currently_not_usedNC
F2PWM         20/ currently_not_usedNC
F2SENSE       21/ currently_not_usedNC
FMC_CLK_DIR  in73  
FMC_TCK      out95  
FMC_TDI      out96  
FMC_TDO      in97  
FMC_TMS      out98  
FMC_VID0     out139  
FMC_VID1     out140  
FMC_VID2     out141  
GND 84REV03 unconnected / currently_not_usedUSB_TRST, other USB HUB
HDIO_SC10 / SC10 inout60  
HDIO_SC11 / SC11  in59  
HDIO_SC12 / SC12out58  
HDIO_SC13 / SC13out57  
HDIO_SC14 / SC14  in56  
HDIO_SC15 / SC15in55CLK 
HDIO_SC16     54/ currently_not_used 
HDIO_SC17     52/ currently_not_used 
HDIO_SC18 / SC18in68  
HDIO_SC19 / SC19in69  
I2C_RST      out61  
JTAGENB       120external Pin for CPLD Firmware Update  
LED_1A / JLED1out109  
LED_2A / JLED2Aout111  
LED_2B / JLED2Bout110  
MIO26        in41  
MIO27        in40  
MIO28        in39  
MIO29        in38  
OCLK_EN  / OSC_EN   out74  
PHY_CONFIG   out65  
PHY_LED0     in67  
PHY_LED1     in86  
PHY_LED2     in85  
SC_CLK0 / CLK0    in76/ currently_not_usedSC_CLK_P
SC_CLK1 / CLK1    in75/ currently_not_usedSC_CLK_N
SC_IO0 / X0in50  
SC_IO1 / X1      in49  
SC_IO2 / X2in48  
SC_IO3 / X3in47  
SC_IO4  / X4    out45  
SC_IO5 / X5     out44  
SC_IO6 / X6out43  
SC_IO7 / X7out42  
SC_IO8        22/ currently_not_usedNC
SC_SCL  / SCL    in14  
SC_SDA / SDA      in13  
SC2_SW3 / SW3    in6  
SC2_SW4 / SW4    in5  
SD_WP        in100  
SFP_LED1 / SFP_LED0out81  
SFP_LED2 / SFP_LED1out82  
SFP_LED3 / SFP_LED2out78  
SFP_LED4 / SFP_LED3out83  
SFP1_LOS      32/ currently_not_usedNC, controlled by FPGA
SFP1_TX_DIS  out33 NC, controlled by FPGA
SFP2_LOS      35/ currently_not_usedNC, controlled by FPGA
SFP2_TX_DIS  out34 NC, controlled by FPGA
STAT_LED0 / LED0 99/ currently_not_used 
STAT_LED1 / LED1 128/ currently_not_used 
USB0_RST / USB_RST   out71  
USBH_LED_G3   11/ currently_not_usedNC
USBH_LED_G4   12/ currently_not_usedNC
USBH_LED_SS1  9/ currently_not_usedNC
USBH_LED_SS2 / dummyout133Dummy Signal / currently_not_usedNC
USBH_LED_SS3  132/ currently_not_usedNC
USBH_LED_SS4  138/ currently_not_usedNC
USBH_MODE0   out142 NC, other USB HUB
USBH_MODE1   out143 NC, other USB HUB
USBH_RST     out10 NC, other USB HUB
XMOD1_A       3/ currently_not_used 
XMOD1_B       2/ currently_not_used 
XMOD1_E      out4  
XMOD1_G      in1  

 

Functional Description

JTAG

Power

...

Appx. A: Change History and Legal Notices

Revision Changes

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

DateDocument RevisionCPLD Firmware RevisionSupported PCB RevisionAuthorsDescription

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


 

REV04(REV02 Special Firmware!), REV03,REV04

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


Work in progress
2016-12-14

v.1

--- 

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


Initial release
 All  
 

Legal Notices

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

 

  • No labels