You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

TE USB FX2 module starts as a DEWESoft device (at power on) (Generation 2) when

  1. Generation 2 firmware is correctly stored in FX2 microcontroller's EEPROM;
  2. the EEPROM connection is enabled when the TE USB FX2 module is powered on.
  • DEWESoft driver is not installed
  • DEWESoft driver is installed

    OR (if you have installed the previous version of driver).

TE USB FX2 module starts as a TE device (at power on) (Generation 3) when

  1. Generation 3 firmware is correctly stored in FX2 microcontroller's EEPROM;
  2. the EEPROM connection is enabled when the TE USB FX2 module is powered on.
  • TE USB FX2 driver is not installed.
  • TE USB FX2 driver is installed.

TE USB FX2 module starts as a Cypress device (at power on) when

  1. the EEPROM connection is disabled when the TE USB FX2 module is powered on.
  • No labels