You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 3
Next »
An update boot (aka TE USB FX2 firmware update) is a multi-step boot operation:
- follow the same procedure desrcibed in update boot and use Open_Fut (gen 2) instead of DEWESoft.
- TE USB FX2 module with the USB EEPROM enabled (when TE USB FX2 module is powered on) should be already inserted at this point.
- A) TE USB FX2 module is seen under Device Driver as a Trenz Electronic Device. In this case, you should start a Recovery boot procedure to download Generation 2 firmware.
- B) TE USB FX2 module is seen under Device Driver as a DEWESoft Device.
- Open the
USB Firmware Upgrade Tool
Open_FUT (gen 2): double click ofut.py
. - Press the "..." button (it means for "Select *.iic file or enter file path”) at left of "Program USB" button corresponding to the firmware file pathname selection
- Select a suitable
.iic
firmware upload file. You can download the firmware availbale at Trenz Electronic GitHub. - Press the “Program USB: write IIC EEPROM” button if you want the *
.iic
file to be written into the large EEPROM of the EZ-USB FX2LP USB FX2 microcontroller. - When the progress bar reaches 100%, the following log text message notifies the successful completion of the USB upgrade procedure.
NOTE: the procedeure are the same of this link but with Dewesoft pid/vid (current_dw.iic).