You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
If you desire to use the TE USB FX2 module, you need to create/download:
- the firmware file (.iic) for USB FX2 microcontroller and EEPROM;
- the bitstream (image) file (.bit or .mcs or .bin) for FPGA and SPI Flash.
For the PROM file .mcs, you can create:
- Xilinx Flash .mcs file
- 3rd-party SPI Flash .mcs file.
The Flash used on TE USB FX2 module are 3rd-party SPI Flash, but you can also use Xilinx Flash .mcs file to program 3rd-party SPI Flash.