If the TE0300 module is used, the S2 switch must be turned on (RUN).
If the TE0320 module is used, the S1D switch must be turned on (RUN).
TE USB FX2 module starts as a DEWESoft device (at power on) (Generation 2) when
If DEWESoft driver is not installed, this immage appears in Windows "Device manager"
If DEWESoft driver is installed, one of these two immage appears in Windows "Device manager"
DEWESoft Driver Version | Device Manager image |
---|---|
Current | |
Prevoius |
TE USB FX2 module starts as a TE device (at power on) (Generation 3) when
If TE USB FX2 driver is not installed, this immage appears in Windows "Device manager"
If TE USB FX2 driver is installed, this immage appears in Windows "Device manager"
TE USB FX2 module starts as a Cypress device (at power on) when
If Cypress USB Generic Driver is not installed this immage appears in Windows "Device manager"
If Cypress USB Generic Driver is installed, this immage appears in Windows "Device manager"