You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

Download PDF version of this document.

Overview

The Trenz Electronic AMB0010 is a commercial grade baseboard for Andromeda modules.

Refer to http://trenz.org/amb0010-info for the current online version of this manual and other available documentation.

Key Features

  • Module
    • Andromeda modules
  • On Board
    • 2 x B2B connector (ADF6)
    • Clock Buffer
    • Oscillator
  • Interface
    • RJ45 LAN Socket
    • XMOD
    • UART Header
    • I2C Header
    • 4 x User DIP Switch
    • 4 x User LED
    • Micro SD Card Socket with ESD protection
    • USB Connector
    • Loopbacks for GTHs, IOs, GPIOs
  • Power
    • 12 V Input Supply Voltage
  • Dimension
    • 128 mm x 106 mm

Block Diagram

AMB0010 block diagram

Main Components

AMB0010 main components
  1. B2B Connector (ADF6), JB5, JB6
  2. Power Jack, J1
  3. Push Button, S1, S3, S4
  4. DIP Switch, S2, S5
  5. LED, D3...9
  6. Pin Header, J8, J19
  7. ESD Protection, U13
  8. Micro SD Socket, J13
  9. XMOD Connector, JB1
  10. RJ45 LAN Socket, J11
  11. USB Socket, J12

Initial Delivery State

Storage device name

Content

Notes

-

-

-

Initial delivery state of programmable devices on the module

Signals, Interfaces and Pins

Connectors

Connector TypeDesignatorInterfaceIO CNTNotes
B2BJB5HP104 SE / 48 DIFF
B2BJB5MGT PL4 x MGT (RX/TX)
B2BJB5MGT PL2 x MGT CLK
B2BJB5HD24 SE / 12 DIFF
B2BJB6HP52 SE / 24 DIFF
B2BJB6MGT PS4 x MGT (RX/TX)
B2BJB6MGT PS2 x MGT CLK
B2BJB6HD24 SE / 12 DIFF
B2BJB6MIO2 x I2C
B2BJB6MIO2 x UART
B2BJB6MIO2 x PERST
B2BJB6MIOSDIO
B2BJB6MIOJTAG
B2BJB6MIO4 x GPIO
B2BJB6ETH

B2BJB6USB

RJ45J11ETH

XMODJB1JTAGJTAG
XMODJB1UARTUART
Pin HeaderJ8UARTUART
Pin HeaderJ19I2CI2C
Power JackJ1PWRPWR
SD Card SocketJ13SDIOSDIO
USB SocketJ12USBUSB
Board Connectors


Test Points

Test PointSignalConnected toNotes
TP1+12.0V_input

TP2+12.0V_input

TP3V_MOD1
C2M
TP4V_MOD1
C2M
TP5Carrier_+3V3
C2M
TP6Carrier_+3V3
C2M
TP7Carrier_+1V8
C2M
TP8Carrier_+1V8
C2M
TP9Module_+3.3VJB6, U4M2C
TP10Module_+3.3VJB6, U4M2C
TP11Module_+1.8VJB5, JB6M2C
TP12Module_+1.8VJB5, JB6M2C
TP13PWR_ENJB6, S4PWR_EN is pulled-up in module AM0010 to 3.3 V.
TP14PWR_ENJB6, S4PWR_EN is pulled-up in module AM0010 to 3.3 V.
TP15Carrier_USB+5V

TP16Carrier_USB+5V

TP17PG_Carrier_+1V8U2, U3, U4, U5, U6, U7, U12
TP18PG_Carrier_+1V8U2, U3, U4, U5, U6, U7, U12
TP19Carrier_PGU3, U6, T7 (LED D5)
TP20Carrier_PGU3, U6, T7 (LED D5)
TP21PG_Carrier_USB+5VU7, U12
TP22PG_Carrier_USB+5VU7, U12
TP23PWR_GOODJB6, U4M2C, pulled-up in module AM0010 to 3.3 V.
TP24PWR_GOODJB6, U4M2C, pulled-up in module AM0010 to 3.3 V.
TP25USB-VBUS

TP26USB-VBUS

TP27IO_X0_D12_PJB6
TP28IO_X0_D12_PJB6
TP29M_SDAJB6
TP30M_SDAJB6
TP31M_SCLJB6
TP32M_SCLJB6
TP33RST_M2C#JB6
TP34RST_M2C#JB6
TP35U_INTJB6
TP36U_INTJB6
TP37PS_POR#JB6, S3PS_POR# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG).
TP38PS_POR#JB6, S3PS_POR# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG).
TP39PS_SRST#JB6, S1PS_SRST# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG).
TP40PS_SRST#JB6, S1PS_SRST# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG).
TP41DX_PJB6
TP42DX_PJB6
TP43DX_NJB6
TP44DX_NJB6
TP45M_INTJB6
TP46M_INTJB6
Test Points Information

On-board Peripherals

Chip/InterfaceDesignatorConnected ToNotes
OscillatorU10U11
Clock BufferU11JB5
RJ45 LAN SocketJ11JB6
XMODJB1JB6
Pin HeaderJ8JB6
Pin HeaderJ19JB6
Power JackJ1

Micro SD Card SocketJ13JB6 via U13
USB SocketJ12JB6 via L7
On board peripherals

Configuration and System Control Signals

Connector+Pin

Signal Name

DirectionDescription
JB6.A59V_BATC2MInput voltage for VCC_PSBATT
JB6.B58RST_M2C#M2CModule reset for peripheral reset
JB6.C53DONEM2CFPGA PS_DONE-signal
JB6.C54MODE0C2MBoot mode selection
JB6.C55MODE1C2MBoot mode selection
JB6.C56MODE2C2MBoot mode selection
JB6.C57MODE3C2MBoot mode selection
JB6.C58PS_SRST#C2MFPGA system reset
JB6.C59PS_POR#bidirectionalPower-on-reset status
JB6.D56DX_PC2MTemperature sensing diode pin
JB6.D57DX_NC2MTemperature sensing diode pin
JB6.D58PWR_ENC2M

Power Enable
(Do not tie "PWR_EN" to VDD directly.
This signal could be tied to GND within
the AM0010 module.)

JB6.D59PWR_GOODM2CPower good status

Legend:

C2M: Carrier to Module

M2C: Module to Carrier

Controller signal.

Power and Power-On Sequence


Power Rails

Power Rail Name/ Schematic NameConnector + PinDirectionNotes
V_MOD1JB5.A7C2M
V_MOD1JB5.A15C2M
V_MOD1JB5.A47C2M

V_MOD1

JB5.A55C2M
V_MOD1JB5.B5C2M
V_MOD1JB5.B11C2M
V_MOD1JB5.B17C2M
V_MOD1JB5.B45C2M
V_MOD1JB5.B51C2M
V_MOD1JB5.B57C2M
Module_+1.8VJB5.C7M2C
Module_+1.8VJB5.C15M2C
Carrier_+1V8JB5.D3C2M
Carrier_+1V8JB5.D17C2M
Carrier_+3V3JB5.D40C2M
Carrier_+1V8JB5.D43C2M
Carrier_+1V8JB5.D57C2M
Carrier_+1V8JB6.A3C2M
Carrier_+1V8JB6.A17C2M
Carrier_+1V8JB6.A59C2M
Module_+1.8VJB6.B7M2C
Module_+1.8VJB6.B15M2C
Carrier_+3V3JB6.B35C2M
Module_+3.3VJB6.B59M2C
V_MOD1JB6.C5C2M
V_MOD1JB6.C11C2M
V_MOD1JB6.C17C2M
Carrier_+3V3JB6.C52C2M
V_MOD1JB6.D7C2M
V_MOD1JB6.D15C2M
Carrier_+3V3JB1.5C2M
Carrier_+3V3JB1.6C2M
Carrier_+3V3J8.1C2M
Carrier_+3V3J19.1C2M
+12.0V_inputJ1.12M

Legend:

C2M: Carrier to Module

  2M: to Module

M2C: Module to Carrier

Module power rails.

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings

Power Rail Name/ Schematic NameDescriptionMinMaxUnit
+12.0V_inputPower Supply11.013.0V
Absolute maximum ratings

Recommended Operating Conditions

This TRM is generic for all variants. Temperature range can be differ depending on the assembly version.  Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

  • Variants of modules are described here: Article Number Information
  • Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
  • Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
  • Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
  • The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.


Power Rail Name/ Schematic NameMinTypicalMaxUnitsReference Document
+12.0V_input11.012.013.0VSee LTC4365ITS8 datasheets.
Recommended operating conditions.


Physical Dimensions

  • Module size: 128 mm × 106 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 5 mm.

PCB thickness: 1.6 mm.

Physical Dimension

Currently Offered Variants 

Trenz shop AMB0010 overview page
English pageGerman page
Trenz Electronic Shop Overview

Revision History

Hardware Revision History

Board hardware revision number.


DateRevisionChangesDocumentation Link
-REV01Initial Revision
Hardware Revision History

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

DateRevisionContributorDescription

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • Initial Revision

--

all

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • --
Document change history.

Disclaimer

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


Table of contents


  • No labels