You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

Download PDF version of this document.

Overview

The Trenz Electronic AM0010 module is an industrial grade module based on Xilinx.

Refer to http://trenz.org/AM0010-info for the current online version of this manual and other available documentation.

Key Features

  • SoC/FPGA
    • Device: ZU1 / ZU2 / ZU3 / ZU4 / ZU5 1)
    • Engine: CG / EG / EV 1)
    • Speedgrade: -1 / -2 1)
    • Temperature Range: Extended / Industrial 1)
    • Package: SFVC784
  • RAM/Storage
    • 4 GByte DDR4 SDRAM with ECC 2)
    • 8 GByte e.MMC 3)
    • 64 MByte HyperFlash 4)
    • 2 x 64 MByte Serial Flash 5)
    • EEPROM with MAC address
  • On Board
    • Gigabit Ethernet Transceiver
    • USB Transceiver (USB3320 or USB3340 6))
    • OPTIGA Trust M
    • CryptoAuthentication
    • Oscillator
    • Analog Multiplexer
  • Interface
    • 2 x B2B Connector (ADM6)
  • Power
    • 5 V ... 12 V power supply via B2B Connector needed.
  • Dimension
    • 56.4 mm x 40 mm
  • Notes
    1) Please, take care of the possible assembly options. Furthermore, check whether the power supply is powerful enough for your FPGA design.
    2) Up to 32 GByte are possible with a maximum bandwidth of 2400 MBit/s.
    3) Up to 64 GByte are possible.
    4) Smaller values are possible.
    5) Up to 2 x 256 MByte are possible.
    6) USB 2.0 devices are possible with USB33040 but USB 3.X devices needs additional customer engagement.


Block Diagram


AM0010 block diagram

Main Components


AM0010 main components


  1. FPGA, U1
  2. DDR4, U2, U3, U9, U12, U14
  3. eMMC, U17
  4. Quad SPI Flash, U6, U7
  5. Connector, J5, J6
  6. Ethernet Transceiver, U8
  7. HyperFlash, U16
  8. EEPROM, U15
  9. OPTIGA Trust M, U27
  10. CryptoAuthentication, U24
  11. USB Transceiver, U10
  12. Oscillator, U13, U14, U30, U31, U32
  13. Analog Multiplexer, U38
  14. Power Supply, U5, U11, U18, U19, U20, U21, U22, U23, U28

Initial Delivery State

Storage device name

Content

Notes

DDR4 SDRAMnot programmed
eMMCnot programmed
Quad SPI Flashnot programmed

HyperFlash

not programmed


EEPROMnot programmed besides factory programmed MAC address
Initial delivery state of programmable devices on the module


Signals, Interfaces and Pins

Connectors

Connector TypeDesignatorInterfaceIO CNTNotes
B2BJ5HP104 SE / 48 DIFF
B2BJ5MGT PL4 x MGT (RX/TX)
B2BJ5MGT PL2 x MGT CLK
B2BJ5HD24 SE / 12 DIFF
B2BJ6HP52 SE / 24 DIFF
B2BJ6MGT PS4 x MGT (RX/TX)
B2BJ6MGT PS2 x MGT CLK
B2BJ6HD24 SE / 12 DIFF
B2BJ6MIO2 x I2C
B2BJ6MIO2 x UART
B2BJ6MIO2 x PERST
B2BJ6MIOSDIO
B2BJ6MIOJTAG
B2BJ6MIO4 x GPIO
B2BJ6ETH

B2BJ6USB

Board Connectors

Test Points

Test PointSignalConnected toNotes
TP1PROG_B#pulled-up to V_IO_CFG
TP2VTT

TP3VTT

TP4VREFA

TP5VREFA

TP60.85V

TP70.85V

TP8DDR_1V2

TP9DDR_1V2

TP10MGTAVCC

TP11MGTAVCC

TP12DDR_2V5

TP13DDR_2V5

TP14PL_VCU_0V9

TP15PL_VCU_0V9

TP161.8V

TP171.8V

TP183.3V_SEQ

TP193.3V_SEQ

TP203.3V

TP213.3V

Test Points Information

On-board Peripherals

Chip/InterfaceDesignatorConnected ToNotes
DDR4 SDRAMU2, U3, U9, U12, U14FPGA - PS
eMMCU17FPGA - PS
Quad SPI FlashU6, U7FPGA - PS
Ethernet TransceiverU8FPGA - PS
HyperFlashU16FPGA - PL
EEPROMU15FPGA - PS
OPTIGA Trust MU27FPGA - PS
CryptoAuthenticationU24FPGA - PS
USB TransceiverU10FPGA - PS
OscillatorU13FPGA - PS
OscillatorU14FPGA - PS
OscillatorU30ETH PHY
OscillatorU31USB PHY
OscillatorU32FPGA
Analog MultiplexerU38FPGA
On board peripherals


Configuration and System Control Signals

Connector.Pin

Signal Name

DirectionDescription
J6.A59V_BATC2MInput voltage for VCC_PSBATT
J6.B58RST_M2C#M2CModule reset for peripheral reset
J6.C53DONEM2CFPGA PS_DONE-signal
J6.C54MODE0C2MBoot mode selection
J6.C55MODE1C2MBoot mode selection
J6.C56MODE2C2MBoot mode selection
J6.C57MODE3C2MBoot mode selection
J6.C58PS_SRST#C2MFPGA system reset
J6.C59PS_POR#bidirectionalPower-on-reset status
J6.D56DX_PC2MTemperature sensing diode pin
J6.D57DX_NC2MTemperature sensing diode pin
J6.D58PWR_ENC2M

Power Enable
(Do not tie "PWR_EN" to VDD directly.
This signal could be tied to GND within
this module.)

J6.D59PWR_GOODM2CPower good status

Legend:

C2M: Carrier to Module

M2C: Module to Carrier

Controller signal.

Power and Power-On Sequence

Power Rails

Power Rail Name/ Schematic NameConnector.PinDirectionNotes
V_MOD1J5.A7C2M
V_MOD1J5.A15C2M
V_MOD1J5.A47C2M

V_MOD1

J5.A55C2M
V_MOD1J5.B5C2M
V_MOD1J5.B11C2M
V_MOD1J5.B17C2M
V_MOD1J5.B45C2M
V_MOD1J5.B51C2M
V_MOD1J5.B57C2M
1.8VJ5.C7M2C
1.8VJ5.C15M2C
V_IO_W01J5.D3C2M
V_IO_W01J5.D17C2M
V_IO_W3J5.D40C2M
V_IO_W45J5.D43C2M
V_IO_W45J5.D57C2M
V_IO_X01J6.A3C2M
V_IO_X01J6.A17C2M
V_BATJ6.A59C2M
1.8VJ6.B7M2C
1.8VJ6.B15M2C
V_IO_X3J6.B35C2M
3.3VJ6.B59M2C
V_MOD1J6.C5C2M
V_MOD1J6.C11C2M
V_MOD1J6.C17C2M
V_IO_CFGJ6.C52C2M
V_MOD1J6.D7C2M
V_MOD1J6.D15C2M
Module power rails.


Board to Board Connectors


The Andromeda modules use Samtec AcceleRate HD High-Density on bottom side.
  • ADM6-60-01.5-L-4-2 (compatible to ADF6-60-03.5-L-4-2), (240 pins, "60" per row)

The Andromeda carriers use Samtec AcceleRate HD High-Density on top side.

  • ADF6-60-03.5-L-4-2 (compatible to ADF6-60-01.5-L-4-2), (240 pins, "60" per row)
Features
  • Board-to-Board Connector 240-pins, 60 contacts per row
  • 0.025" (0.635 mm) pitch
  • Data Rate: max 56 Gbps 
  • Mates with: ADM6/APF6
  • Insulator Material: LCP, Black
  • Contact Material:  Copper Alloy
  • Plating: Au or Sn over 50 µ" (1.27 µm) N
  • Operating Temperature Range: -55 ºC to +125 ºC
  • PCIe 5.0 capable: Yes
  • Lead-Free Solderable: Yes
  • RoHS Compliant: Yes
Connector Mating height

When using the same type on baseboard, the mating height is 5mm. Other mating heights are possible by using connectors with a different height

Order numberConnector on baseboardcompatible toMating height
30095REF-30095ADM6-60-01.5-L-4-25 mm
31137REF-31137ADF6-60-03.5-L-4-25 mm
Connectors.

The module can be manufactured using other connectors upon request.

Connector Speed Ratings

The  AcceleRate HD High-Density  connector speed rating depends on the stacking height; please see the following table:

Stacking heightSpeed rating
5 mm 10/ 25/ 56 Gbps
Speed rating.
Current Rating

Current rating of  Samtec AcceleRate HD High-Density B2B connectors is 1.34 A per pin (4 pins powered)

Connector Mechanical Ratings
  • Shock: 100G, 6 ms Sine
  • Vibration: 7.5G random, 2 hours per axis, 3 axes total


Manufacturer Documentation

  File Modified
PDF File 20200225_hsc_adm6-xx-01p5-xxx-4-a_adf6-xx-03p5-xxx-4-a.pdf 04 03, 2022 by ED
PDF File adf6.pdf 04 03, 2022 by ED
PDF File adm6.pdf 04 03, 2022 by ED
PDF File adm6-xxx-xx.x-xxx-4-x-x-xr-mkt.pdf 04 03, 2022 by ED
PDF File adm6-xxx-xx.x-xxx-x-x-x-footprint.pdf 04 03, 2022 by ED



Technical Specifications

Absolute Maximum Ratings

Power Rail Name/ Schematic NameDescriptionMinMaxUnit
V_MOD1Main input power supply-0.318V
V_IO_W01HP FPGA Bank 65 voltage-0.5002.000V
V_IO_W3HD FPGA Bank 24 voltage-0.5003.400V
V_IO_W45HP FPGA Bank 64 voltage-0.5002.000V
V_IO_X01HP FPGA Bank 66 voltage-0.5002.000V
V_BAT (using LDO)FPGA Battery Voltage
6V
V_BAT (using resistor)FPGA Battery Voltage-0.5002.000V
V_IO_X3HD FPGA Bank 24 voltage-0.5003.400V
V_IO_CFGPS FPGA Bank 501 and 503 Voltage-0.33.630V
AM0010 absolute maximum ratings

Recommended Operating Conditions

This TRM is generic for all variants. Temperature range can be differ depending on the assembly version.  Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)


Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

  • Variants of modules are described here: Article Number Information
  • Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
  • Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
  • Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
  • The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.


ParameterMinMaxUnitsReference Document
V_MOD14.516VSee TPS54A24 and FS1406 datasheets.
V_IO_W010.9501.900VSee FPGA datasheet.
V_IO_W31.1403.400VSee FPGA datasheet.
V_IO_W450.9501.900VSee FPGA datasheet.
V_IO_X010.9501.900VSee FPGA datasheet.
V_BAT (using LDO)2.05.5VSee AP7354D datasheet.
V_BAT (using resistor)1.2001.89VSee FPGA datasheet.
V_IO_X31.1403.400VSee FPGA datasheet.
V_IO_CFG1.7103.465VSee FPGA datasheet.
Recommended operating conditions.


Physical Dimensions

  • Module size: 56.4 mm × 40 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 5 mm.

PCB thickness: 2 mm.


Physical Dimension

Currently Offered Variants 

Trenz shop AM0010 overview page
English pageGerman page
Trenz Electronic Shop Overview

Revision History

Hardware Revision History


Board hardware revision number.


DateRevisionChangesDocumentation Link
-REV01First Production ReleaseREV01
Hardware Revision History

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

DateRevisionContributorDescription

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • Initial Document

--

all

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • --
Document change history.

Disclaimer

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


Table of contents


  • No labels