Overview
Refer to http://trenz.org/cr00100-info for the current online version of this manual and other available documentation.
Key Features
- Quartus 20.1 Lite
- NIOS II
- UART
- SDRAM memory
- User Buttons
- User LED
Revision History
| Date | Quartus | Project Built | Authors | Description |
|---|---|---|---|---|
| 2021-02-25 | 20.1 Lite | CR00100-test_board_noprebuilt-quartus_20.1.1-20220225103813.zip CR00100-test_board-quartus_20.1.1-20220225104254.zip | Thomas Dück |
|
Design Revision History
Release Notes and Know Issues
| Issues | Description | Workaround | To be fixed version |
|---|---|---|---|
| No known issues | --- | --- | --- |
Known Issues
Requirements
Software
| Software | Version | Note |
|---|---|---|
| Quartus Prime Lite | 20.1 | needed |
| NIOS II SBT for Eclipse | --- | optional |
Software
Hardware
Complete List is available on <project folder>/board_files/*_board_files.csv
Design supports following modules:
| Module Model | Board Part Short Name | PCB Revision Support | DDR | QSPI Flash | EMMC | Others | Notes |
|---|---|---|---|---|---|---|---|
| CR00100-01-DBC82A* | 08_C8_8MB | REV01 | 8MByte | -- | -- | -- | -- |
| CR00100-01-FBC82A | 16_C8_8MB | REV01 | 8MByte | -- | -- | -- | -- |
*used as reference
Hardware Modules
Design supports following carriers:
| Carrier Model | Notes |
|---|---|
| --- |
*used as reference
Hardware Carrier
Additional HW Requirements:
| Additional Hardware | Notes |
|---|---|
| USB cable for JTAG/UART | Check Carrier Board and Programmer for correct type |
*used as reference
Additional Hardware
Content
For general structure and usage of the reference design, see Project Delivery - Intel devices
Design Sources
| Type | Location | Notes |
|---|---|---|
| Quartus | <project folder>/source_files/quartus <project folder>/source_files/<Board Part Short Name>/quartus | Quartus project will be generated by TE Scripts optional, source files for specific assembly variants |
| Software | <project folder>/source_files/software <project folder>/source_files/<Board Part Short Name>/software | Additional software will be generated by TE Scripts optional, source files for specific assembly variants |
Design sources
Prebuilt
File | File-Extension | Description |
|---|---|---|
| SOPC Information File | *.sopcinfo | File with description of the .qsys file to create software for the target hardware |
| SRAM Object File | *.sof | Ram configuration file |
| Software-Application-File | *.elf | Software application for NIOS II processor system |
| Diverse Reports | --- | Report files in different formats |
Prebuilt files (only on ZIP with prebult content)
Download
Reference Design is only usable with the specified Quartus version. Do never use different versions of Quartus software for the same project.
Reference Design is available on:
Design Flow
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.
Trenz Electronic provides a tcl based built environment based on Quartus Design Flow.
See also:
- Project Delivery - Intel devices
The Trenz Electronic FPGA Reference Designs are TCL-script based projects. To create a project, open a project or program a device execute "create_project_win.cmd" on Windows OS and "create_project_linux.sh" on Linux OS.
TE Scripts are only needed to generate the quartus project, all other additional steps are optional and can also executed by Intel Quartus/SDK GUI. For currently Scripts limitations on Win OS and Linux OS see: Project Delivery - Intel devices → Currently limitations of functionality
- Open create_project_win.cmd/create_project_linux.sh:
- Select Board in "Board selection"
- Click on "Create project" button to create project
- (optional for manual changes) Select correct quartus installation path in "<project folder>/settings/design_basic_settings.tcl"
Launch
Programming
Check Module and Carrier TRMs for proper HW configuration before you try any design.
MAX10 Flash
- Connect JTAG and power on carrier with module
- Open create_project_win.cmd/create_project_linux.sh
- Select correct board in "Board selection"
- Click on "Program device" button
- if prebuilt files are available: select "Program prebuilt file"
- using own generated programming file: select "Program other file" and click on "Browse ..." to open own generated programming file
- (optional) click on "Open programmer GUI" to program device with Quartus programmer GUI
- Click on "Start program device" button
JTAG
Not used on this example.
Usage
- Prepare HW like described on section CR00100 Test Board#Programming
- Connect UART USB (most cases same as JTAG)
- Power on PCB
- Press user button 'S2' to toggle between two frequencies for the blinking led 'LED2'
UART
- Open Serial Console (e.g. PuTTY)
select COM Port
Win OS: see device manager
Linux OS: see dmesg | grep tty (UART is *USB1)
- Speed: 115200
- Press reset button
- Console output depends on used Software project, see Software Design - SDK#Application
System Design - Quartus
Block Design
The block designs may differ depending on the assembly variant.
Block Design - Project
Block Design - Platform Desginer
Software Design - SDK
Application
Used software project depends on board assembly variant. Template location: <project folder>/source_files/software/
hello_cr00100
This is a Hello World example as endless loop instead of one console output.
Appx. A: Change History and Legal Notices
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
| Date | Document Revision | Authors | Description |
|---|---|---|---|
| |||
| -- | all | -- |
Document change history
Legal Notices
Data Privacy
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
Document Warranty
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
Limitation of Liability
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
Copyright Notice
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
Technology Licenses
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
Environmental Protection
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH, RoHS and WEEE
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Table of contents
Overview
Content Tools