Table of Contents
The Trenz Electronic TE0723-03 is a Arduino compatible FPGA module based on the Xilinx ZYNQ XC7Z010 SoC.
Additional assembly options are available for cost or performance optimization upon request.
Storage device name | Content | Notes |
---|---|---|
QSPI Flash | Empty |
List of signals between PL banks and external connectors:
JTAG access to the Xilinx ZYNQ XC7Z010 SoC is provided through testpoints TP1-T4.
JTAG Signal | Testpoint |
---|---|
TCK | TP3 |
TDI | TP1 |
TDO | TP2 |
TMS | TP4 |
LED | Color | Connected To | Description and Notes |
---|---|---|---|
D2 | Red | MIO9, U1 | |
D6 | Green | Bank 34, U1 | FPGA_LED |
D7 | Green | 3.3V | PWR_LED |
MIO | Function | Connected To | Notes |
---|---|---|---|
0 | SDCARD | J10-9 | Card detect switch. |
1 | QSPI | U5-1 | SP0-CS |
2 | QSPI | U5-5 | SPI0-DQ0 |
3 | QSPI | U5-2 | SPI0-DQ1 |
4 | QSPI | U5-3 | SPI0-DQ2 |
5 | QSPI | U5-7 | SPI0-DQ3 |
6 | QSPI | U5-6 | SPI0-SCK |
7 | GPIO | U18-27 | USB PHY reset. |
10 | SDCARD | J10-7 | DAT0 |
11 | SDCARD | J10-3 | CMD |
12 | SDCARD | J10-5 | CLK |
13 | SDCARD | J10-8 | DAT1 |
14 | SDCARD | J10-1 | DAT2 |
15 | SDCARD | J10-2 | CD/DAT3 |
28 | USB-OTG | U18-7 | OTG-DATA4 |
29 | USB-OTG | U18-31 | OTG-DIR |
30 | USB-OTG | U18-29 | OTG-STP |
31 | USB-OTG | U18-2 | OTG-NXT |
32 | USB-OTG | U18-3 | OTG-DATA0 |
33 | USB-OTG | U18-4 | OTG-DATA1 |
34 | USB-OTG | U18-5 | OTG-DATA2 |
35 | USB-OTG | U18-6 | OTG-DATA3 |
36 | USB-OTG | U18-1 | OTG-CLK |
37 | USB-OTG | U18-9 | OTG-DATA5 |
38 | USB-OTG | U18-10 | OTG-DATA6 |
39 | USB-OTG | U18-13 | OTG-DATA7 |
48 | ESP | J5-2 | ESP_TXD |
49 | ESP | J5-7 | ESP_RXD |
52 | ESP | J5-6 | MOD_RST |
53 | ESP | J5-3 | ESP_GPIO0 |