Additional Master Pinout Viewer/XDC-Generator is available on Trenz Electronic Download - Pinout
Short How to Use
- The Integration Guide is split into two tables
- Module Power Connection Table show the Module Power Supply of the different FPGA-Bank and Components, which are connected to the B2B Connector.
Carrier Board Power Connection Table show the Power Supply of the B2B Connector with Connector Pins and Schematic Names and Option of the different Carrier Boards.
- The PCBs have fixed and variable user supplied I/O voltages. Variable power supply pins are colored in four groups (VCCIOA, VCCIOB, VCCIOC, VCCIOD).
- Find your Module on the Module Table and check the power supply of the different FPGA-Banks.
- If the Power supply is variable, go to the Carrier Table and see how it's connected on your carrier board. Often the power supply can be switch via jumper, resistor or variable used from other connector pin of the carrier board. So use the schematic name or the component designator from this table to search for the option on the PCB schematics or TRM.
Module Power Connection Table
| Group | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Module | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | Bank | IOs | TYP | IO-Voltage | |
| TE0710 | B15 | 48 | HR | VCCIOA | - | - | - | - | - | - | - | - | B34 | 50 | HR | VCCIOD | B16 | 6 | HR | 3.3V | B14 | 8 | HR | 3.3V | 2x 100Mbit ETH | ||||
| TE0711 | B15 | 48 | HR | VCCIOA | B34 | 36 | HR | VCCIOB | B14 | 18 | HR | 3.3V | B35 | 50 | HR | VCCIOD | B16 | 6 | HR | 1.8V | B14 | 8 | HR | 3.3V | B34 | 8 | HR | VCCIOB | |
| TE0712 | B16 | 48 | HR | VCCIOA | B13 | 20 | HR | VCCIOB | B14 | 18 | HR | 3.3V | B15 | 50 | HR | VCCIOD | B13 | 6 | HR | VCCIOB | B14 | 8 | HR | 3.3V | 1x 100Mbit ETH / B13 | 4 | HR | VCCIOB | |
| TE0715-xx-15 | B13 | 48 | HR | VCCIOA | B34 | 16 | HR | VCCIOC | B34 | 18 | HR | VCCIOC | B35 | 40 | HR | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0715-xx-30 | B13 | 48 | HR | VCCIOA | B34 | 16 | HP | VCCIOC | B34 | 18 | HP | VCCIOC | B35 | 40 | HP | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0720 | B35 | 48 | HR | VCCIOA | B34 | 36 | HR | VCCIOB | B33 | 18 | HR | VCCIOC | B13 | 50 | HR | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0820* | B25/B26 | 48 | HD | VCCIOA | B64 | 50 | HR | VCCIOD | 6 | MIO | 1.8V | 8 | MIO | 3.3V | 1x Gbit ETH | ||||||||||||||
| TE0741 | B13 | 48 | HR | VCCIOA | B16 | 16 | HR | VCCIOB | B15 | 18 | HR | VCCIOC | B12 | 50 | HR | VCCIOD | GTX | 1 Lane | B14 | 8 | HR | 3.3V | GTX | 2 Lanes | GTX | ||||
| TE0742* | |||||||||||||||||||||||||||||
| TE0841 | B64 | 48 | HR | VCCIOA | B66 | 18 | HP | VCCIOB | B68 | 18 | HP | VCCIOC | B67 | 50 | HP | VCCIOD | GTH | 1 Lane | B65 | 8 | HR | 3.3V | GTH | 2 Lanes | GTH | ||||
| TE0842* | |||||||||||||||||||||||||||||
I/O resource comparison for all 4x5 modules. There are maximum 4 user supplied I/O voltages (VCCIOA, VCCIOB, VCCIOC, VCCIOD).
Attention: Maximum power supply for HP-Banks is 1.8V.
Carrier Board Power Connection Table
| IO Voltage | B2B Connector | Carrier Boards | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Direction | JB1 | JB2 | TE0701 | TE0703 Rev1-Rev4 | TE0703 Rev5 | TE0705 | TE0706 | |||||
| Pin | Pin | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | ||
| PWR_1 | out | 2,4,6 | 1,3,5,7 | 5V0 | 5V | 3.3V | 3.3V | 3.3V | 3.3V | 5V0 | 5V | 3.3V | 3.3V |
| VCCIOA | out | 10,12 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO35 | R23→M3.3VOUT / J1B-B1 | VCCIOA | J5→M3.3VOUT,M1.8VOUT / R23→M3.3VOUT / J1-B1 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO35 | R20->M3.3VOUT/J6B-B32 | |
| VCCIOD | out | 8,10 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO13 | R26→M3.3VOUT / J2B-B1 | VCCIOD | J10→M3.3VOUT,M1.8VOUT / R26→M3.3VOUT / J2B-B1 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO13 | R22->M3.3VOUT/J6B-B1 | |
| PWR_2 | out | 14,16 | 3V3IN | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | 3V3IN | 3.3V | 3.3V | 3.3V | |
| VCCIOB | out | 2,4 | no name | FMC_VADJ/2V5/3.3VOUT | VCCIO34 | J5→M3.3VOUT / J1B-B32 | VCCIOB | J8→M3.3VOUT,M1.8VOUT / J2B-B32 | VIOTB | FMC_VADJ/2V5/3.3VOUT | 1.8V | 1.8V | |
| VCCIOC | out | 6 | no name | FMC_VADJ/2V5/3.3VOUT | VCCIO33 | R25→M3.3VOUT / J2B-B32 | VCCIOC | J9→M3.3VOUT,M1.8VOUT / R25→M3.3VOUT / J2B-B32 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO33 | R21->M3.3VOUT | |
| PWR_M1 | in | 9,11 | 3.3VOUT | 3.3V | 3.3VOUT | 3.3V | M3.3VOUT | 3.3V | 3.3VOUT | 3.3V | M3.3VOUT | 3.3V | |
| PWR_M2 | in | 40 | VIOB | 1.8V | M1.8VOUT | 1.8V | M1.8VOUT | 1.8V | VIOB | 1.8V | M1.8VOUT | 1.8V | |
| PWR_VBAT | out | 80 | VBAT | B1 | VBAT | J7 | VBAT | J7 | NC | VBAT | J9 | ||
| PWR_JTAG | in | 92 | VCCJTAG | VCCJTAG | VCCJTAG | VCCJTAG | VCCJTAG | ||||||
Power comparison for all 4x5 carrier boards. Power direction based on carrier boards view.There are 4 variable user supplied I/O voltages (VCCIOA, VCCIOB, VCCIOC, VCCIOD). PWR_1, PWR_2 are fixed from carrier boards. PWR_M1, PWR_M2 used normally default value from module.
Attention: On some Carrier-Boards user supplied I/O voltages are connected together (Red schematic names).
Overview
Content Tools