Starter Kit 803

This Trenz Electronic Starter Kit consists of a TE0803 module on a TEBF0808 base board in Mini-ITX Enclosure. See Shop Link for detailed content.

Wiki Links

TE0803 UltraSOM+ - Wiki with TRM, reference projects, application notes and more

TE0790-XMOD FTDI JTAG Adapter - Wiki with settings and configurations

Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC

Project Delivery - General descriptions of reference designs and content

Download Links

TE0803 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more

TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more

TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more

TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator

Shop Links

Shop TE0803-Starter-Kit - contains prices, order number, content...

Xilinx Software and Driver

Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation. Vivado Webpack XCZU3CG/EG support will be available from Version 2017.1 .

Xilinx Download Area - All Xilinx Software, Device Models and Libraries

Getting Started

WARNING: Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM

Connect mains power and set power switch to on.
Connect mini USB cable to host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture, the one with green dot, closer to the SoM)
Insert SD-Card with pre-loaded content into SD-Card slot.
Open Serial Console:
1. COM Port: for correct number see device manager
2. Speed:115200
Press the Power on button on the enclosure.
Linux login:
1. User Name:root
2. Password:root