TE0820 Test Board

Overview

Key Features

• PetaLinux
• SD
• ETH
• USB
• I2C
• RTC
• FMeter

Revision History

Release Notes and Know Issues

Requirements

Software

Hardware

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

Design supports following carriers:

Additional HW Requirements:

Content

For general structure and of the reference design, see Project Delivery

Design Sources

Additional Sources

Prebuilt

Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

Reference Design is available on:

• TE0820 Reference Design Download Area

Design Flow

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

• Vivado/SDK/SDSoC
• Vivado Projects
•  Project Delivery.

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
   
2. Press 0 and enter for minimum setup
3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Create Project
   
   1. Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see TE Board Part Files
5. Create HDF and export to prebuilt folder
   
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
6. Create Linux (bl31.elf, uboot.elf and image.ub) with exported HDF
   
   1. HDF is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
   2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from /os/petalinux
         Note: run init_config.sh before you start petalinux config. This will set correct temporary path variable.
7. Add Linux files (bl31.elf, uboot.elf and image.ub) to prebuilt folder
   
   1. "prebuilt\os\petalinux\default" or "prebuilt\os\petalinux\<short name>"
      Notes: Scripts select "prebuilt\os\petalinux\<short name>", if exist, otherwise "prebuilt\os\petalinux\default"
8. Generate Programming Files with HSI/SDK
   
   1. Run on Vivado TCL: TE::sw_run_hsi
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
   2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
      Note: See SDK Projects

Launch

Programming

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

Note: Depending on CPLD Firmware and Boot Mode settings, QSPI boot with Linux image on SD or complete SD Boot is possible.

QSPI

Used this if you use CPLD Firmware with QSPI Boot selectable

1. Set Boot Mode to JTAG (See Carrier and TE0820 CPLD description)
2. Connect JTAG
3. Power ON PCB
4. Program Flash
   1. Open Vivadi HW-Manager (use Auto Connect)
   2. Right Click on FPGA Device (xczu...) and "Add Configuration Memory Device"
   3. Select "mt25qu256-qspi-x8-dual_parallel"
   4. On "Program Configuration Memory Device":
      1. Set Configuration file: "prebuilt\boot_images\<short name>\u-boot\BOOT.bin"
      2. Set Zynq FSBL: "prebuilt\software\<short name>\zynqmp_fsbl.elf"
      3. Press OK
   5. Note: Other possible ways, see Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging
               Do not use Trenz Script for Programming at the moment. Dual Parallel Flash Scripts support is not implemented.
5. Copy image.ub on SD-Card.
   • For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
6. Power OFF PCB
7. Set Boot Mode to QSPI
   • Depends on Carrier, see carrier TRM.

SD

1. Copy image.ub and Boot.bin on SD-Card.
   • For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
2. Set Boot Mode to SD-Boot.
   • Depends on Carrier, see carrier TRM.
3. Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

1. Prepare HW like described on section Programming
2. Connect UART USB (most cases same as JTAG)
3. Select SD Card or QSPI as Boot Mode (Depends on used programming variant)
   Note: See TRM of the Carrier, which is used.
4. Power On PCB
   Note: 1. ZynqMP Boot ROM loads FSBL from SD into OCM, 2. FSBL loads U-boot from SD into DDR, 3. U-boot load Linux from SD into DDR

Linux

1. Open Serial Console (e.g. putty)
   
   1. Speed: 115200
   2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
2. Linux Console:
   Note: Wait until Linux boot finished For Linux Login use:
   
   1. User Name: root
   2. Password: root
3. You can use Linux shell now.
   1. I2C 0 Bus type: i2cdetect -y -r 0
   2. RTC check: dmesg | grep rtc
   3. ETH0 works with udhcpc
   4. USB type  "lsusb" or connect USB2.0 device
      

Vivado HW Manager

SI5339_CLK0 Counter: 

1. Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).
   1. Set radix from VIO signals to unsigned integer.
      Note: Frequency Counter is inaccurate and displayed unit is Hz
      

SI5338 CLK is configured to  200MHz by default.

PHY LEDS

• See: TE0820 CPLD#X0/X1Pin

CPLD Firmware:

• See: TE0820 CPLD#X0/X1Pin
  

System Design - Vivado

Block Design

PS Interfaces

Activated interfaces:

Constrains

Basic module constrains

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design

Design specific constrain

set_property PACKAGE_PIN K9 [get_ports {SI5338_CLK0_D_clk_p[0]}]
set_property IOSTANDARD LVDS [get_ports {SI5338_CLK0_D_clk_p[0]}]
set_property DIFF_TERM TRUE [get_ports {SI5338_CLK0_D_clk_p[0]}]

set_property PACKAGE_PIN H1 [get_ports {x0_phy_led[0]}]
set_property IOSTANDARD LVCMOS18 [get_ports {x0_phy_led[0]}]
set_property PACKAGE_PIN J1 [get_ports {x1_firmware[0]}]
set_property IOSTANDARD LVCMOS18 [get_ports {x1_firmware[0]}]

Software Design - SDK/HSI

For SDK project creation, follow instructions from:

SDK Projects

Application

FSBL

TE modified 2017.2 FSBL

Changes:

• Si5338 Configuration, ETH+OTG Reset over GPIO see xfsbl_board.c and xfsbl_board.h
• Add register_map.h, si5338.c, si5338.h

PMU

Xilinx default PMU firmware.

Hello World

Xilinx default Hello world example. Note: Hello World output appears only on time on power up. 

U-Boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

Software Design -  PetaLinux

For PetaLinux installation and  project creation, follow instructions from:

• PetaLinux KICKstart

Config

No changes.

U-Boot

• Change platform-top.h

#include <configs/platform-auto.h>

/* Bugfix to select SD1 instead of eMMC(SD0) */
#define CONFIG_EXTRA_ENV_SETTINGS \
    SERIAL_MULTI \ 
    CONSOLE_ARG \ 
    PSSERIAL0 \ 
    "nc=setenv stdout nc;setenv stdin nc;\0" \ 
    "ethaddr=00:0a:35:00:22:01\0" \
    "importbootenv=echo \"Importing environment from SD ...\"; " \ 
        "env import -t ${loadbootenv_addr} $filesize\0" \ 
    "loadbootenv=load mmc $sdbootdev:$partid ${loadbootenv_addr} ${bootenv}\0" \ 
    "sd_uEnvtxt_existence_test=test -e mmc $sdbootdev:$partid /uEnv.txt\0" \ 
    "uenvboot=" \ 
    "if run sd_uEnvtxt_existence_test; then" \ 
        "run loadbootenv" \ 
        "echo Loaded environment from ${bootenv};" \ 
        "run importbootenv; \0" \ 
    "sdboot=echo boot Petalinux; run uenvboot ; mmcinfo && fatload mmc 1 ${netstart} ${kernel_img} && bootm \0" \ 
    "autoload=no\0" \ 
    "clobstart=0x10000000\0" \ 
    "netstart=0x10000000\0" \ 
    "dtbnetstart=0x11800000\0" \ 
    "loadaddr=0x10000000\0" \ 
    "boot_img=BOOT.BIN\0" \ 
    "load_boot=tftpboot ${clobstart} ${boot_img}\0" \ 
    "update_boot=setenv img boot; setenv psize ${bootsize}; setenv installcmd \"install_boot\"; run load_boot ${installcmd}; setenv img; setenv psize; setenv installcmd\0" \ 
    "install_boot=mmcinfo && fatwrite mmc 1 ${clobstart} ${boot_img} ${filesize}\0" \ 
    "bootenvsize=0x40000\0" \ 
    "bootenvstart=0x100000\0" \ 
    "eraseenv=sf probe 0 && sf erase ${bootenvstart} ${bootenvsize}\0" \ 
    "jffs2_img=rootfs.jffs2\0" \ 
    "load_jffs2=tftpboot ${clobstart} ${jffs2_img}\0" \ 
    "update_jffs2=setenv img jffs2; setenv psize ${jffs2size}; setenv installcmd \"install_jffs2\"; run load_jffs2 test_img; setenv img; setenv psize; setenv installcmd\0" \ 
    "sd_update_jffs2=echo Updating jffs2 from SD; mmcinfo && fatload mmc 1:1 ${clobstart} ${jffs2_img} && run install_jffs2\0" \ 
    "install_jffs2=sf probe 0 && sf erase ${jffs2start} ${jffs2size} && " \ 
        "sf write ${clobstart} ${jffs2start} ${filesize}\0" \ 
    "kernel_img=image.ub\0" \ 
    "load_kernel=tftpboot ${clobstart} ${kernel_img}\0" \ 
    "update_kernel=setenv img kernel; setenv psize ${kernelsize}; setenv installcmd \"install_kernel\"; run load_kernel ${installcmd}; setenv img; setenv psize; setenv installcmd\0" \ 
    "install_kernel=mmcinfo && fatwrite mmc 1 ${clobstart} ${kernel_img} ${filesize}\0" \ 
    "cp_kernel2ram=mmcinfo && fatload mmc 1 ${netstart} ${kernel_img}\0" \ 
    "dtb_img=system.dtb\0" \ 
    "load_dtb=tftpboot ${clobstart} ${dtb_img}\0" \ 
    "update_dtb=setenv img dtb; setenv psize ${dtbsize}; setenv installcmd \"install_dtb\"; run load_dtb test_img; setenv img; setenv psize; setenv installcmd\0" \ 
    "sd_update_dtb=echo Updating dtb from SD; mmcinfo && fatload mmc 1:1 ${clobstart} ${dtb_img} && run install_dtb\0" \ 
    "fault=echo ${img} image size is greater than allocated place - partition ${img} is NOT UPDATED\0" \ 
    "test_crc=if imi ${clobstart}; then run test_img; else echo ${img} Bad CRC - ${img} is NOT UPDATED; fi\0" \ 
    "test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \ 
    "netboot=tftpboot ${netstart} ${kernel_img} && bootm\0" \ 
    "default_bootcmd=run cp_kernel2ram && bootm ${netstart}\0" \ 
""

Device Tree

/include/ "system-conf.dtsi"
/ {
};

/* ETH PHY */
&gem3 {

    status = "okay";
  		ethernet_phy0: ethernet-phy@0 {
        compatible = "marvell,88e1510";
        device_type = "ethernet-phy";
    	reg = <1>;
    };
};


/* QSPI PHY */
&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "n25q256a";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};

/* DMA not used: Reduce error messages on linux.*/

&lpd_dma_chan1 {
    status = "disabled";
};
&lpd_dma_chan2 {
    status = "disabled";
};
&lpd_dma_chan3 {
    status = "disabled";
};
&lpd_dma_chan4 {
    status = "disabled";
};
&lpd_dma_chan5 {
    status = "disabled";
};
&lpd_dma_chan6 {
    status = "disabled";
};
&lpd_dma_chan7 {
    status = "disabled";
};
&lpd_dma_chan8 {
    status = "disabled";
};

Kernel

No changes.

Rootfs

Activate:

• i2c-tools

Applications

startup

Script App to load init.sh from SD Card if available.

See: \os\petalinux\project-spec\meta-user\recipes-apps\startup\files

Additional Software

No additional software is needed.

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Date	Document Revision	Authors	Description
Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Work in progress
2017-09-11	v.1	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Initial release
	All	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Legal Notices