You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

CPLD Firmware Update - General Requirements

  • Lattice Diamond or Lattice Diamond Programmer is available for free on http://www.latticesemi.com/
  • Lattice compatible JTAG Programmer, for example:
    • Most JTAG programmer, which used FTDI Chip to translate USB to JTAG
    • Trenz TE0790 or Carrier with FTDI for JTAG
  • JTAG must be connected to CPLD JTAG
  • JTAG Enable Pin of CPLD must be selectable and set to VDD
  • Correct CPLD Firmware (JED-File) from Trenz Electronic Download

CPLD Firmware Update - General Procedure

Important: Connect only one JTAG to host PC. Close all other programs, like Xilinx tools.

  1. Enable CPLD JTAG access (See JTAG section on CPLD Firmware description)
  2. Connect JTAG
  3. Power on System
  4. Open Lattice Diamond Programmer
  5. Detect Cable and click "Ok"
  6. Select Device (See CPLD Firmware overview description).
  7. Select correct Firmware from Download Area (JED File)
  8. Program CPLD:
  9. Disable CPLD JTAG access
  10. Restart System

More Information are available on the CPLD Firmware description and on the readme.txt included into the download zip.

 

  • No labels