Table of contents

Overview

Firmware for PCB-Master CPLD with designator U5: LCMX02-1200HC.

Feature Summary

  • Power Management
  • Reset Management
  • FMC JTAG
  • LED Control
  • FAN Control (FPGA)
  • FAN Control (FMC
  • I2C MUX

Firmware Revision and supported PCB Revision

See Document Change History

Product Specification

Port Description

Name / opt. VHD NameDirectionPinDescriptionConnection changes compared to REV01
200MHZCLK_ENout30Enable 200MHz Osc.
BUTTONin77Reset Button
CPLD_JTAG_TCKin91optional FMC JTAG
CPLD_JTAG_TDIin94optional FMC JTAG
CPLD_JTAG_TDOout95optional FMC JTAG
CPLD_JTAG_TMSin90optional FMC JTAG
DDR3_SCL inout43I2C connected to FPGA
DDR3_SDA inout42I2C connected to FPGA
DONEin18FPGA Done
EN_1V8out58Power Enable
EN_3V3FMCout60Power Enable
EN_FMC_VADJout51Power Enable
F1PWMout98FAN
F1SENSEin99FAN / currently_not_used
FEX_DIR
19/ currently_not_used
FEX0 out12PERST from PCIe slot
FEX1
15/ currently_not_used
FEX10
4/ currently_not_used
FEX11 in10User LED
FEX2
13/ currently_not_used
FEX3
9/ currently_not_used
FEX4
3/ currently_not_used
FEX5
7/ currently_not_used
FEX6
24/ currently_not_used
FEX7
17/ currently_not_used
FEX8
21/ currently_not_used
FEX9
25/ currently_not_used
FAN_FMC_ENout78FMC FAN Enablenot connected on REV01
FMC_PG_C2M
69/ currently_not_used
FMC_PG_M2C
68/ currently_not_used
FMC_PRSNTin40FMC Present  (inverted FMC_PRSNT_M2C_L )not connected on REV01
N.C.
70Not ConnectedFMC_PRSNT_M2C_L on REV01
FMC_SCL
49I2C connected to FPGA
FMC_SDA
48I2C connected to FPGA
FMC_TCK
27/ currently_not_used
FMC_TDI
31/ currently_not_used
FMC_TDO
32/ currently_not_used
FMC_TMS
28/ currently_not_used
FMC_TRST
36/ currently_not_used
FPGA_IIC_OE
14I2C FPGA
FPGA_IIC_SCL
1I2C FPGA
FPGA_IIC_SDA
16I2C FPGA
JTAG_ENin82JTAG ENABLE over DIP S1-1constant high on REV01
LED1out76Status LED D1 (green)
LTM_1V_IO0
86Power Good
LTM_1V_IO1
88Power Good
LTM_1V5_4V_IO0
85Power Good
LTM_1V5_4V_IO1
83Power Good
LTM_1V5_RUN
74/ currently_not_used
LTM_4V_RUN
75/ currently_not_used
LTM_SCL
67I2C connected to FPGA
LTM_SDA
66I2C connected to FPGA
LTM1_ALERT
65/ currently_not_used
LTM2_ALERT
64/ currently_not_used
PCIE_RSTBin37PERST from PCIe card edge connector
PG_1V8in59Power Good
PG_3V3in61Power Good
PG_FMC_VADJin52Power Good
PLL_SCL inout2I2C SI5338
PLL_SDA inout8I2C SI5338
PROGRAM_Bout20FPGA PROG_B
VID0_FMC_VADJout53FMC EN5365QI power selection pin
VID0_FMC_VADJ_CTRLin71Power pin pre-selection for FMC VADJ through DIP SW S1-2. CPLD decides.not connected on REV01
VID1_FMC_VADJout54FMC EN5365QI power selection pin
VID1_FMC_VADJ_CTRLin63Power pin pre-selection for FMC VADJ through DIP SW S1-3. CPLD decides.not connected on REV01
VID2_FMC_VADJout57FMC EN5365QI power selection pin
VID2_FMC_VADJ_CTRLin62Power pin pre-selection for FMC VADJ through DIP SW S1-4. CPLD decides.not connected on REV01


Functional Description

JTAG

CPLD JTAG is selectable with DIP S1-1. (ON FMC, OFF CPLD).

FMC JTAG is accessible with J9 JTAG Pinheader on PCB REV02 and newer only.

Power

Power sequence on will be executed over 4 States:

  • State 1 IDLE: Wait until LTM_1V_IO0 (1V), LTM_1V_IO1 (1V) and LTM_1V5_4V_IO1 (4V) is available.
  • State 2 PS1: Enables 1V8, 3V3FMC and VADJ. Wait until PG_1V8 (1.8V), PG_3V3 (3.3V) and PG_FMC_VADJ (FMC VADJ) is available.
  • State 3 PS2: Wait until LTM_1V5_4V_IO0 (1.5V) is available
  • State 4 RDY: All power on

State machine restart power sequencing, if on of the power good signal are lost.

FMC VADJ is selectable via DIP S1-2...4.

S1-4S1-3S1-2Voltage
OFFOFFOFF3.3V
OFFOFFON2.5V
OFFONOFF1.9V
OFFONON1.5V
ONOFFOFF1.25V
ONOFFON1.2V

Note on PCB REV01 it's fix 1.8V.

Reset

PROGRAM_B is controlled by push button after power up sequencing is ready.

CLK

200MHz CLK is enabled after power up.

I2C

Connect SI5338, LTM and FMC, SODIMM I2C and internal FAN Control to FPGA I2C Bus.

FAN1

I2C Baseaddress: 0x74 (changeable with Firmware update). I2C with 8Bit Register Address with 8Bit Data. I2C CLK currently 20 MHz supported.

Write Access:

Register AddressNameDescription
0FAN CTRLEnable FAN1 (Bit7)
1FAN1 PWMFAN1 PWM (0%-100%, Default 80%)


Read Access:

Register AddressNameDescription
0FAN CTRLFAN Control register
1FAN1 RPSFAN1 Revolutions per second

FAN FMC

Is enabled/disabled with FMC preset signal (PCB REV02 only).

Button

Button is debounced and controls PROG_B signal from FPGA.

LED

LED is used as Status LED for power management and programming. Status depends on blink sequence.

StatusBlink sequenceComment
Error - Power IDLE state********Reset or Main Power Problem
Error - Power PS1 state*****oooPeriphery Power Problem (1.8V, 3.3V, FMC VADJ)
Error - Power PS2 state****ooooDDR Bank Power Problem (1.5V)
Power Ready, FPGA not programmed***ooooo~0,7 Hz, duty cycle 3/8
--**oooooo~0,7 Hz, duty cycle 2/8, currently not used
--*ooooooo~0,7 Hz, duty cycle 1/8, currently not used
User Modeuser defined Power Ready, FPGA programmed, LED is accessible over FEX11


Appx. A: Change History and Legal Notices

Revision Changes

CPLD REV02 to REV03

  • FMC JTAG access over CPLD Programmer (not accessible on PCB REV01)
  • DIP VADJ (not usable on PCB REV01)
  • FMC FAN EN/DIS over FMC_PRSNT (not usable on PCB REV01)

CPLD REV01 to REV02

  • BUGFIX: PCIe Reset
  • USER LED accessible
  • I2C for SI5338, LTM, FMC, SODIMM
  • Add FAN Control over I2C

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

DateDocument RevisionCPLD Firmware RevisionSupported PCB RevisionAuthorsDescription

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

REV03REV02

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


  • REV03 finished

v.1REV02REV01
  • Revision 02 finished
  • separate page for PCB REV01
2017-08-06v.1REV01REV01John Hartfiel
  • REV01 finished
2017-05-29

v.1

---

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


  • Initial release

All

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


Appx. A: Legal Notices

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]


  • No labels