You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Table of Contents

TEBF0808 with TE080x

Overview

Board Overview
  1. TODO

Power supply


DIP-Switches and Push Buttons


DIP Switches /Push Buttons


Jumpers

Jumpers

LEDs


Carrier LEDs

Furthermore, there are two user LEDs on module TE0728.

DesignatorColorConnected toNote
D1RedDONE signal (PS Configuration Bank 503)

This LED goes ON when power has been applied to the module and stays ON until MPSoC's programmable logic is configured properly.

Module LEDs

JTAG/UART

SoC JTAG and UART connections are available through XMOD JTAG adapter with the green dot on J12. For more information refer to TE0790.

DIP Switch on the XMOD JTAG adapter must be set like the following table.

DIP SwitchSetting
1ON
2OFF
3OFF
4OFF
XMOD JTAG DIP Switch. Attention: Never changes the default setting

Reference Designs

Notes

Module and Carrier are also as starter kit available:


  • No labels