CRUVI modules use on bottom side:
- TMMH-106-04-F-DV-A-M as Low Speed connectors, (12 pins, 6 per row)
- ST4-30-1.50-L-D as High Speed connectors, (60 pins, 30 per row)
CRUVI carrier use on top side:
- CLT-106-02-F-D-A-K as Low Speed connectors , (12 pins, 6 per row)
- SS4-30-3.50-L-D as High Speed connectors, (60 pins, 30 per row)
Connector Mating height
Mating heigh of the high speed connectors is 5mm. The low speed connectors mate correctly within a range from 4.78 mm to 5.29 mm.
Current Rating
Current rating of High Speed B2B connectors is 1.6A per pin (2 pins powered).
Current rating of Low Speed B2B connectors is 4.1A per pin (2 pins powered).
Speed Rating
There is no data availabe for the connectors actual used here. Data availabe for other stacking heights of same connectors is summarized in the folllowing table:
Connector | Speed ratings |
---|---|
ST4/SS4 single ended (4mm stacking height!) | 13.5GHz / 27 Gbps |
ST4/SS4 differential (4mm stacking height!) | 15.5 GHz / 31 Gbps |
TMMH/CLT single ended (4.77mm stacking height!) | 5.5GHz / 11 Gbps |
Connector speed ratings
Operating Temp Range
All connectors are specified for a temp. range of -55 °C to 125 °C.
Overview
Content Tools