Table of contents

General instructions

TE0790 CPLD Access

Set DIP S2-1 to OFF. It's recommended to disconnect XMOD from Carrier and Core power supply to USB with DIPS2-4 to ON, see TE0790 TRM DIP-switch Section.

Available CPLD Firmware

• TE0790 CPLD - XMOD Standard - Firmware description for the most TE PCBs
  • Default delivered Firmware
• TE0790 CPLD - XMOD Standard_RXTXSWAP - Firmware description with UART RX/TX swapped
• TE0790 CPLD - XMOD DIP40 -Firmware description used with TE0722