changes.mady.by.user Sergio Pavesi
Saved on 25 10, 2013
...
Xilinx iMPACT(Windows OS or Linux OS)
direct or indirectin system programming
.mcs file (both Xilinx Flash andthird-party SPI Flashcan be used)
A Linux version of this tool exists.
old .fwu (and .bin) file
Gen2
Obsolete,not recommended.
32 bit only.
FPGA Configuration
.bit, .mcs file( Xilinx Flash only) orold .fwu (and .bin) file
.iic file andold .fwu (and .bin) file
Python 2.7 interpreterrequired.
(5)
.bit or a .mcs file( Xilinx Flash only) or old .fwu (and .bin) file
Firmware Update
Gen3
.iic file
Recovery Boot
Microsoft .NET FrameworkVersion ≥ 2.0required.
OpenFutNet:it is possible to run 3 different procedures (Windows OS)
FPGA Configuration(6)
.bit or .mcs file(both Xilinx Flash and third-party SPI Flash can be used)
the
Recovery Boot (7)should beused instead
Firmware Update(6)
forRecovery Boot (7)
forFirmware Update (6)
forFPGA Config (4)
Recovery Boot (7)
Microsoft .NET FrameworkVersion≥ 4.0.30319required.
Recommended tool.
.bin only
.bin, but a .iic should also work
use fx2loader (see also here) instead
but it could be a two stepprocedure
but it could be a two step procedure
(8)
modified recoveryboot
(1) Generation 2 Firmware Upgrade: it requires DEWESoft device driver (VID/PID:0x0547/0x1002) and DEWESoft API.