changes.mady.by.user Sergio Pavesi
Saved on 25 10, 2013
...
Xilinx iMPACT(Windows OS or Linux OS)
direct or indirectin system programming
.mcs file (both Xilinx Flash andthird-party SPI Flashcan be used)
A Windows OS and a Linux OS version of this tool exists.
old .fwu (and .bin) file
Gen2
Obsolete,not recommended.
Only Windows OS(32 bit only)version of this tool exists.
FPGA Configuration
.bit, .mcs file( Xilinx Flash only) orold .fwu (and .bin) file
.iic file andold .fwu (and .bin) file
Python 2.7 interpreterrequired.
Only Windows OS (32 bit only) version of this tool exists.
(5)
.bit or a .mcs file( Xilinx Flash only) or old .fwu (and .bin) file
Firmware Update
Gen3
Only Windows OS version of this tool exists.
.iic file
Recovery Boot
Less easy than CyControl.
Microsoft .NET FrameworkVersion ≥ 2.0required.
OpenFutNet:it is possible to run 3 different procedures (Windows OS)
FPGA Configuration(6)
.bit or .mcs file(both Xilinx Flash and third-party SPI Flash can be used)
the
Recovery Boot (7)should beused instead
Firmware Update(6)
forRecovery Boot (7)
forFirmware Update (6)
forFPGA Config (4)
Recovery Boot (7)
Microsoft .NET FrameworkVersion≥ 4.0.30319required.
Recommended tool.
.bin only
.bin, but a .iic should also work
use fx2loader (see also here) instead
libusb library (C API) should be used
Only Linux OS version of this tool exists.
but it could be a two stepprocedure
but it could be a two step procedure
(8)
modified recoveryboot
(1) Generation 2 Firmware Upgrade: it requires DEWESoft device driver (VID/PID:0x0547/0x1002) and DEWESoft API.