Page History
Switches: settings for USB Firmware, FPGA bitstream programming, Power Supply and reset.
Organized by modules
TE0300 is provided with the following slide switches:
- S1: 1 x slide switch (system)
- S2: 1 x slide switch (system)
- S3: 1 x slide switch (system)
- S4: 1 x slide switch (system)
TE0320 is provided with the following slide switches:
TE0630 is provided with the following slide switches:
Organized by types
EEPROM switch
(EEPROM enabled: a connection between EEPROM and USB FX2 microcontroller )exists.
EEPROM disabled: a connection between EEPROM and USB FX2 microcontroller doesn't exist.
EEPROM switch:
| Tip |
|---|
| For all the switches above EEPROM is enabled when the switch is ON and the EEPROM is disabled when the switch is OFF. |
| Tip |
|---|
EEPROM switch is ON by default, to allow the USB FX2 microcontroller to read the serial EEPROM and enumerate as a custom/specific USB device.
|
...
Power Rails Configuration
Power Rails Configuration:
Master Reset
Master Reset (aka Reset Line):
FPGA Configuration selection
FPGA Configuration selection (SPI+Jtag or only JTAG):
- TE0300: S4
- TE0320: it doesn't exist as a switch
- TE0630: it doesn't exist as a switch
...
- TE0300: they doesn't exist as switches.
- TE0320: S1[B:C], for more information.
- TE0630: they doesn't exist as switches.
...
Overview
Content Tools