Name / opt. VHD Name | Direction | Pin | Pullup/Down | Bank Power | Description |
---|
ALERT_N | in | B33 | UP | +3.3V_STB | Digital output . Interrupt or SMBus alert output of temperature sensors . Can be configured as a second THERM output. (Pulled up) [U43(TMP461AIRUNT- U43,U47,U52,U57,U4](TMP461AIRUNT),U61(LM96163CISD/NOPB)) and temperature sensor with integrated fan control (LM96163-U61) |
CPLD_DEBUG0 | out | A41 | UP | +3.3V_STB |
|
CPLD_DEBUG1 | out | A2 | UP | +3.3V_STB |
|
CPLD_DEBUG2 | out | B1 | UP | +3.3V_STB |
|
CPLD_DEBUG3 | out | A3 | NONE | +3.3V_STB |
|
CPLD_HD0 | ? | B3 | UP | +3.3V_STB |
|
CPLD_HD1 | ? | B28 | UP | +3.3V_STB |
|
EN_VCCINT | out | B22 | DOWN | +3.3V_STB | Enable pin for +0.85V DC-DC converter (LTM4630EY-U42A) |
EN_VTT_DDR | out | A22 | DOWN | +3.3V_STB | Enable pin for 2A Peak Sink/Source DDR Termination Regulator (TPS51206-U2, U3) |
EN+0.85V_GT_AVCC_PS | out | B21 | DOWN | +3.3V_STB | Enable pin for 1.5A low-dropout linear regulator (TPS74801DRC-U45) |
EN+0.9V_GT_AVCC | out | B14 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +0.9V output voltage (LTM4644EY-U44) |
EN+1.0V | out | A46 | DOWN | +3.3V_STB | Enable pin for 1.5A low-dropout linear regulator with +1.0V output voltage (TPS74801DRC-U13) |
EN+1.2V_DDR | out | A34 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +1.2V output voltage (LTM4644EY-U53) |
EN+1.2V_GT_AVTT | out | B16 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +1.2V output voltage (LTM4644EY-U48) |
EN+1.2V_PLL_PS | out | A15 | DOWN | +3.3V_STB | Enable pin for 1.5A low-dropout linear regulator (TPS74801DRC-U46) |
EN+1.3V_MGT_PS | out | B15 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +1.37V output voltage (LTM4644EY-U44) |
EN+1.8V | out | B13 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +1.8V output voltage (LTM4644EY-U53) |
EN+1.8V_AUX | out | A30 | DOWN | +3.3V_STB | Enable pin for 1.5A low-dropout linear regulator with +1.8V output voltage (TPS74801DRC-U49,U50,U51) |
EN+1.8V_GT_AVTT_PS | out | B20 | DOWN | +3.3V_STB | Enable pin for 1.5A low-dropout linear regulator with +1.8V output voltage (TPS74801DRC-U54) |
EN+2.5V_DDR | out | A44 | DOWN | +3.3V_STB | Enable pin for 1.5A low-dropout linear regulator with +2.5V output voltage (TPS74801DRC-U55, U56) |
EN+2V_MGT_PS | out | A21 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +2.0V output voltage (LTM4644EY-U48) |
EN+3.3V | out | B18 | DOWN | +3.3V_STB | Enable pin for quad DC-DC microModule regulator with configurable 4A output array for +3.3V output voltage (LTM4644EY-U1) |
EN+5V_BIAS | out | A17 | DOWN | +3.3V_STB | Enable pin for low dropout linear regulator with +5V output voltage (ADP7102ACPZ-U58) |
EXT_STATUS_LED_G | out | B9 | NONE | +3.3V_STB | External status LED green (J40-Pin2) |
EXT_STATUS_LED_R | out | A25 | NONE | +3.3V_STB | External status LED red (J40-Pin3) |
FAN_EN | out | B29 | UP | +3.3V_STB | Enables a smart high-side power switch to drive the FAN (BTS41411N-U60) |
FPGA_DONE | in | A24 | UP | +3.3V_STB | FPGA PL configuration done indicator |
FTDI_PWR_EN_N | in | A36 | UP | +3.3V_STB | Active low power enable output of FTDI chip (FT2232H56Q-U38) |
FTDI_RX | out | A35 | NONE | +3.3V_STB | UART RXD of FTDI chip (FT2232H56Q-U38) |
FTDI_TCK | in | A45 | NONE | +3.3V_STB | FTDI JTAG clock pin (FT2232H56Q-U38) |
FTDI_TDI | in | A47 | NONE | +3.3V_STB | FTDI JTAG data input pin (FT2232H56Q-U38) |
FTDI_TDO | out | A48 | NONE | +3.3V_STB | FTDI JTAG data output pin (FT2232H56Q-U38) |
FTDI_TMS | in | B34 | NONE | +3.3V_STB | FTDI JTAG mode select pin (FT2232H56Q-U38) |
FTDI_TX | in | B27 | NONE | +3.3V_STB | UART TXD of FTDI chip (FT2232H56Q-U38) |
I2C_SCL_CPLD | inout | B32 | UP | +3.3V_STB | I2C clock pin that connected to all temperature sensors and current sensor |
I2C_SDA_CPLD | inout | A42 | UP | +3.3V_STB | I2C data pin that connected to all temperature sensors and current sensor |
JTAGEN | in | B30 | DOWN | +3.3V_STB | JTAG enable input pin (Dip switch S4-1) |
MIO30_UART0_RXD |
| A8 | NONE | +1.8V | MIO30 pin of FPGA (XCZU11EG-1FFVC1760I- U30R) |
MIO31_UART0_TXD |
| A9 | NONE | +1.8V | MIO31 pin of FPGA (XCZU11EG-1FFVC1760I- U30R) |
MIO32_UART1_TXD |
| B8 | NONE | +1.8V | MIO32 pin of FPGA (XCZU11EG-1FFVC1760I- U30R) |
MIO33_UART1_RXD |
| B7 | NONE | +1.8V | MIO33 pin of FPGA (XCZU11EG-1FFVC1760I- U30R) |
MR | out | A26 | UP | +3.3V_STB | Manual-reset that connected to MR pin of ultralow supply-current voltage monitor chip (TPS3106K33DBVR-U73) |
NetU68_B2 |
| B2 |
|
| /currently_not_used |
PG_VCCINT | in | B23 | UP | +3.3V_STB | Power good pin for +0.85V DC-DC converter (LTM4630EY-U42A) |
PG+0.85V_GT_AVCC_PS | in | B12 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator for +0.85V output voltage (TPS74801DRC-U45) |
PG+0.9V_GT_AVCC | in | A18 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array for +0.9V output voltage (LTM4644EY-U44) |
PG+1.0V | in | B35 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +1.0V output voltage (TPS74801DRC-U13) |
PG+1.2V_DDR | in | A33 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array for +1.2V output voltage (LTM4644EY-U53) |
PG+1.2V_GT_AVTT | in | A11 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array for +1.2V output voltage (LTM4644EY-U48) |
PG+1.2V_PLL_PS | in | A28 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator for +1.2V output voltage (TPS74801DRC-U46) |
PG+1.3V_MGT_PS | in | A20 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array for +0.9V output voltage (LTM4644EY-U44) |
PG+1.8V | in | B25 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array for +1.8V output voltage (LTM4644EY-U53) |
PG+1.8V_AUX | in | A27 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +1.8V output voltage (TPS74801DRC-U50) |
PG+1.8V_AUX_PS | in | B10 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +1.8V output voltage (TPS74801DRC-U51) |
PG+1.8V_GT_AUX | in | A13 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +1.8V output voltage (TPS74801DRC-U49) |
PG+1.8V_GT_AVTT_PS | in | A16 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +1.8V output voltage (TPS74801DRC-U54) |
PG+2.5V_DDR | in | A32 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +2.5V output voltage (TPS74801DRC-U55) |
PG+2.5V_PL_DDR | in | A38 | UP | +3.3V_STB | Power good pin for 1.5A low-dropout linear regulator with +2.5V output voltage (TPS74801DRC-U56) |
PG+2V_MGT_PS | in | A1 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array for +2.0V output voltage (LTM4644EY-U48) |
PG+3.3V | in | A23 | UP | +3.3V_STB | Power good pin for quad DC-DC microModule regulator with configurable 4A output array with +3.3V output voltage (LTM4644EY-U1) |
PWR_BTN | in | A12 | UP | +3.3V_STB | Power button input (J40-Pin1) |
PWR_STAT_GRN | out | B24 | NONE | +3.3V_STB | Red LED for power status display ( D11-Red) |
PWR_STAT_RED | out | A31 | NONE | +3.3V_STB | Green LED for power status display (D12-Green) |
SRST_B | inout | B5 | UP | +1.8V | PS software reset (Active Low) (XCZU11EG-1FFVC1769I- U30S) |
TCK | out | A5 | NONE | +1.8V | Zynq JTAG clock pin (XCZU11EG-1FFVC1760I- U30S) |
TDI | out | B4 | NONE | +1.8V | Zynq JTAG data input pin (XCZU11EG-1FFVC1760I- U30S) |
TDO | in | A6 | NONE | +1.8V | Zynq JTAG data output pin (XCZU11EG-1FFVC1760I- U30S) |
THERM_N | in | A40 | UP | +3.3V_STB | Overtemperature termal shutdown pin of temperature sensors ( TMP461, U43,U47,U52,U57,U4) and temperature sensor with integrated fan control (LM96163-U61) |
TMS | out | A7 | NONE | +1.8V | Zynq JTAG mode select pin (XCZU11EG-1FFVC1760I- U30S) |