Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The Trenz Electronic TE0714 is an industrial-grade SoM (System om Module) based on Xilinx Artix-7, 16 megabyte MByte Flash memory and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os O's is provided via rugged high-speed stacking strips. All modules in 4 x 5 cm form factor are mechanically compatible.

...

Key Features

  • Xilinx Artix-7 (A15T, A35T, A50T)

  • Rugged for shock and high vibration
  • 16 MByte QSPI Flash memory
  • Differential MEMS Oscillator for GT Clocking
  • MEMS Oscillator for PL Clocks (option)
  • Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
    • 144 FPGA I/Os O's (max 68 differential)
    • XADC Analog Input
    • 4 GTP (high-performance transceiver) lanes
    • GT Reference Clock input
    • Optimized I/O and power pins for good signal integrity
  • On-board high-efficiency DC-DC converters
  • eFUSE bit-stream encryption (AES)
  • One user LED

Assembly options for cost or performance optimization available upon request. Possible options:

  • FPGA Type (A15T, A35T, A50T), temperature grade
  • GT Clock Frequency (or none if not assembled)
  • PL Clock Frequency and precision or none if not assembled)
  • Config and B14 Bank Voltage: 1.8V or 3.3V
  • SPI Flash type (or none if not assembled)
  • LED Color (or none if not assembled)
  • PUDC Pin strapping (pull high or pull down)
  • GT Power Enable pin strapping (default power enabled or disabled)

Current Assembly Variants

VariantFPGAGT ClockPL ClockPUDCGT PWR EnableB14/Config VoltageSPI FlashLED
StandardA35T-2I125MHz25MhzLowEnabled3.3VS25FL127SRed
35-2IC6A35T-2I125MHz25MHzLowEnabled1.8VN25Q128Red

Signals, Interfaces and Pins

...