Page History
...
The Trenz Electronic TE0714 is an industrial-grade SoM (System on Module) based on Xilinx Artix-7, 16 MByte Flash memory and powerful switching mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips. All modules in 4 x 5 cm form factor are mechanically compatible.
Block Diagram
Main Components
...
- Xilinx Artix-7 FPGA (XC7A series), U4
- SPI Flash, U7
- B2B Connectorconnector Samtec Razor Beam™ LSHM-150, JM2
- B2B Connectorconnector Samtec Razor Beam™ LSHM-150, JM1
- MEMS Oscillator (PL Clock)25 MHz Oscillator, U8
- Single Output Low-Dropout Linear Regulator (1.2V_MGT), U6
- Single Output Low-Dropout Linear Regulator (1.0V_MGT), U5
- Low-Jitter Precision LVDS 125 MHz Oscillator (GT Clock), U2
- Red Indication LED, D4
- Step-Down DC-DC Converter (1.0V), U1
- PFET Load Switch With Configurable Slew Rate (3.3V), Q1
- Low Power Step-Down DC-DC Converter (1.8V), U3
- Voltage Detector for Circuit Initialization and Timing Supervision, U23
...
Hardware Revision History
| Date | PCB Revision | Changes Notes | PCN linkLink | Documentation linkLink |
|---|---|---|---|---|
| 2016-08-04 | 02 | VCCIO0 added to B2B | PCN-20160815 | TE0714-02 |
01 | - | - | TE0714-01 |
Hardware revision number is printed on the PCB board next to the module model number separated by the dash.
Document Change History
Date | visionRevision | Authors | Description |
|---|---|---|---|
| 2017-01-27 | Jan Kumann | New block diagram. | |
| 2016-12-01 | V17 | Jan Kumann | Changes in the document structure, few corrections. |
| 2016-11-18 | V14 | Thorsten Trenz, Emmanuel Vassilakis | Hardware revision 02 specific changes. |
2016-06-01 | V9 | Antti Lukats | Initial version. |
...
Overview
Content Tools