Page History
...
- Xilinx ZYNQ-7000 family SoC, U1
- 256 Mbit Quad SPI Flash Memory Micron N25Q256A, U12
- Low Power Programmable Oscillator SiTime SiT8008BI @33.333 MHz, U12
- Low Power Programmable Oscillator SiTime SiT8008BI @25.000 MHz, U9
- Marvell Alaska 88E1512 Gigabit Ethernet PHY, U3
- Intelligent Memory 512 MByte DDR3L-1600 SDRAM (8 Banks a 32 MWords, 16 Bit Word-Width), U3
- TI TPS51206 DDR3 Memory Termination Regulator with buffered reference votlage VTTREF, U18
- Intersil ISL12020MIRZ Real-Time-Clock, U24
- TI TCA9517 Level-shifting I²C bus repeater, U17
- LED D2 red
- LED D1 green
- Intelligent Memory 512 MByte DDR3L-1600 SDRAM (8 Banks a 32 MWords, 16 Bit Word-Width), U5
- Altera Enpirion EN63A0QI 12A DCDC PowerSoC @1.0V (VCCINT), U4
- TI TPS74401RGW LDO DC/DC regulator @1.2V (MGTAVTT), U8
- TI TPS72018DRVR LDO DC/DC regulator @1.8V (MGTAUX), U6
- TI TPS74401RGW LDO DC/DC regulator @1.0V (MGTAVCC), U11
- Silicon Labs Si5338A I²C Programmable Quad Clock Generator, U13
- Low Power Programmable Oscillator SiTime SiT8008BI @25.000 MHz, U21
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J3
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J1
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J2
- 256 Mbit Quad SPI Flash Memory (Micron N25Q256A, U14
- Microchip USB3320 USB PHY Transceiver, U32
- Low Power Programmable Oscillator SiTime SiT8008BI @52.000 MHz, U33
- Microchip 24AA025E48 EEPROM for MAC Address
- Lattice Semiconductor MachXO2-256HC System Controller CPLD, U2
Key Features
- Xilinx Zynq Z-7030/Z-7035/Z-7045
- 1 GByte 32-Bit DDR3/L
- 32 MByte SPI Flash
- B2B Connectors 3 x 160 pins
- 250 I/O's, all HR and HP I/O
- 1 Gbit Ethernet PHY
- USB 2.0 OTG PHY
- 8 x GTX (7030: 4 GT)
- 2 GT Reference Clock inputs (7030: 1 REFCLK
- Reference clock input for PLL (optional)
- 2 x PLL outputs
- I2C
- 6 MIO
- RTC
- MAC Address EEPROM
...
Overview
Content Tools