Page History
Scroll Ignore |
---|
Download PDF version of this document. |
Scroll pdf ignore | |
---|---|
Table of Contents
|
Overview
Scroll Only (inline) |
---|
Refer to "https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0745" for downloadable version of this manual and the rest of available documentation. |
The Trenz Electronic TE0745 is an industrial-grade SoC module integrating a Xilinx Zynq-7 (Z-7030, Z-7035 or Z-7045), 1 GByte DDR3/L SDRAM, 32 MByte SPI Flash memory for configuration and operation and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
Block Diagram
Main Components
- Xilinx ZYNQ-7000 family SoC, U1
- 256 Mbit Quad SPI Flash Memory Micron N25Q256A, U12
- Low Power Programmable Oscillator SiTime SiT8008BI @33.333 MHz, U12
- Low Power Programmable Oscillator SiTime SiT8008BI @25.000 MHz, U9
- Marvell Alaska 88E1512 Gigabit Ethernet PHY, U3
- Intelligent Memory 512 MByte DDR3L-1600 SDRAM (8 Banks a 32 MWords, 16 Bit Word-Width), U3
- TI TPS51206 DDR3 Memory Termination Regulator with buffered reference votlage VTTREF, U18
- Intersil ISL12020MIRZ Real-Time-Clock, U24
- TI TCA9517 Level-shifting I²C bus repeater, U17
- LED D2 red
- LED D1 green
- Intelligent Memory 512 MByte DDR3L-1600 SDRAM (8 Banks a 32 MWords, 16 Bit Word-Width), U5
- Altera Enpirion EN63A0QI 12A DCDC PowerSoC @1.0V (VCCINT), U4
- TI TPS74401RGW LDO DC/DC regulator @1.2V (MGTAVTT), U8
- TI TPS72018DRVR LDO DC/DC regulator @1.8V (MGTAUX), U6
- TI TPS74401RGW LDO DC/DC regulator @1.0V (MGTAVCC), U11
- Silicon Labs Si5338A I²C Programmable Quad Clock Generator, U13
- Low Power Programmable Oscillator SiTime SiT8008BI @25.000 MHz, U21
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J3
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J1
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J2
- 256 Mbit Quad SPI Flash Memory (Micron N25Q256A, U14
- Microchip USB3320 USB Transceiver PHY , U32
- Low Power Programmable Oscillator SiTime SiT8008BI @52.000 MHz, U33
- Microchip 24AA025E48 EEPROM for MAC Address
- Lattice Semiconductor MachXO2-256HC System Controller CPLD, U2
Key Features
Industrial-grade Xilinx Zynq-7000 (Z-7030, Z-7035, Z-7045) SoM
- Rugged for shock and high vibration
- 10/100/1000 Mbps Ethernet transceiver PHY
- MAC address EEPROM
- 16-Bit wide 1GB DDR3 SDRAM
- 32 MByte QSPI flash memory
- Programmable clock generator
- Plug-on module with 3 × 160-pin high-speed hermaphroditic strips
- 132 FPGA I/Os (65 LVDS pairs possible) and 14 PS MIO available on B2B connectors
- 8 GTX (high-performance transceiver) lanes (Z-7030: 4 GTX lanes)
- GTX (high-performance transceiver) clock input
- USB 2.0 OTG high-speed PHY
- On-board high-efficiency DC-DC converters
- 4.0 A x 1.0 V power rail
- 1.5 A x 1.5 V power rail
- 1.5 A x 1.8 V power rail
- System management
- eFUSE bit-stream encryption
- AES bit-stream encryption
- Temperature compensated RTC (real-time clock)
- User LED
- Evenly-spread supply pins for good signal integrity
Additional assembly options are available for cost or performance optimization upon request.
I2C Address Map
Device | ||
---|---|---|
RTC | 0x6F | |
RTC RAM | 0x57 | |
MAC Address EEPROM | 0x53 | |
Si5338 PLL | 0x70 |
B2B connectors
Include Page | ||||
---|---|---|---|---|
|
Technical Specifications
Absolute Maximum Ratings
Recommended Operating Conditions
Physical Dimensions
Module size: 52 mm × 76 mm. Please download the assembly diagram for exact numbers
Mating height with standard connectors: 4mm
PCB thickness: 1.6mm
Highest part on PCB: approx. 3mm. Please download the step model for exact numbers
All dimensions are given in millimeters.
Operating Temperature Ranges
Commercial grade: 0°C to +70°C.
Industrial grade: -40°C to +85°C.
The module operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Weight
.. g - Plain module
.. g - Set of bolts and nuts
Revision History
Hardware Revision History
Date | Revision | Notes | Link to PCN | Documentation Link |
---|---|---|---|---|
2016-10-11 | 02 | Production release | TE0745-02 | |
2016-04-18 | 01 | Prototypes | TE0745-01 |
Hardware revision number is written on the PCB board together with the module model number separated by the dash.
Document Change History
Date | Revision | Contributors | Description |
---|---|---|---|
2017-02-05 | Jan Kumann | Initial document. |
Disclaimer
Include Page | ||||
---|---|---|---|---|
|