Page History
Scroll Ignore |
---|
Download PDF version of this document. |
Scroll pdf ignore | |
---|---|
Table of Contents
|
...
Figure 2: TE0745-02 SoC module.
- Xilinx Zynq XC7Z family SoC, U1
- 256 Mbit Quad SPI Flash memory Micron N25Q256A, U12
- Reference clock signal oscillator SiTime SiT8008BI @33.333333 MHz, U12
- Reference clock signal oscillator SiTime SiT8008BI @25.000000 MHz, U9
- Marvell Alaska 88E1512 Gigabit Ethernet PHY, U3
- Intelligent Memory 512 MByte DDR3L-1600 SDRAM (8 Banks a 32 MWords, 16-bit word width), U3
- TI TPS51206 DDR3 memory termination regulator with buffered reference voltage VTTREF, U18
- Intersil ISL12020MIRZ Real-Time-Clock, U24
- TI TCA9517 level-shifting I2C bus repeater, U17
- Red LED, D2
- Green LED, D1
- Intelligent Memory 512 MByte DDR3L-1600 SDRAM (8 banks a 32 MWords, 16 Bit word width), U5
- Altera Enpirion EN63A0QI 12A DC-DC PowerSoC @1.0V (VCCINT), U4
- TI TPS74401RGW LDO DC-DC regulator @1.2V (MGTAVTT), U8
- TI TPS72018DRVR LDO DC-DC regulator @1.8V (MGTAUX), U6
- TI TPS74401RGW LDO DC-DC regulator @1.0V (MGTAVCC), U11
- Silicon Labs Si5338A I2C Programmable Quad Clock Generator, U13
- Reference clock signal oscillator SiTime SiT8008BI @25.000 MHz, U21
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J3
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J1
- Samtec ST5-80-1.50-L-D-P-TR 160-pin stacking strips (2 rows a 80 positions), J2
- 256 Mbit Quad SPI Flash memory (Micron N25Q256A), U14
- Microchip USB3320 USB transceiver PHY , U32
- Reference clock signal oscillator SiTime SiT8008BI @52.000000 MHz, U33
- Microchip 24AA025E48 EEPROM for MAC address, U23
- Lattice Semiconductor MachXO2-256HC System Controller CPLD, U2
...
Voltages on B2B | B2B J1 Pin | B2B J2 Pin | B2B J3 Pin | Input/ | Note | |
---|---|---|---|---|---|---|
PL_VIN | 147, 149, 151, 153, | - | - | Input | module supply voltage | |
PS_VIN | - | 154, 156, 158 | - | Input | module supply voltage | |
PS_3.3V | - | 160 | - | Input | module supply voltage | |
VCCIO12 | 54, 55 | - | - | Input | high range bank I/O voltage | |
VCCIO13 | 112, 113 | - | - | Input | high range bank I/O voltage | |
VCCIO33 | - | - | 115, 120 | Input | high performance bank I/O voltage | |
VCCIO34 | 29, 30 | - | Input | high performance bank I/O voltage | ||
VCCIO35 | 87, 88 | - | Input | high performance bank I/O voltage | ||
VBAT_IN | 146 | - | - | Input | RTC (battery-backed) supply voltage | |
PS_1.8V | - | 130 | - | Output | internal 1.8V voltage level (Process System) |
...
Date | Revision | Contributors | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| John Hartfiel |
| |||||||||
v.80 | John Hartfiel |
| |||||||||
2017-11-13 | V.79 | Ali Naseri, Jan Kumann, John Hartfiel |
|
...
Overview
Content Tools