...
Initial Delivery State
Scroll Title |
---|
anchor | Table_Initial_Delivery_State |
---|
title | Table 1: Initial delivery state of programmable devices on the module. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Storage device name | Content | Notes |
---|
SPI Flash OTP Area | Empty, not programmed | Except serial number programmed by flash vendor | SPI Flash Quad Enable bit | Programmed |
| SPI Flash main array | demo design |
| eFUSE USER | Not programmed |
| eFUSE Security | Not programmed |
|
|
Control Signals
Page properties |
---|
|
- Overview of Boot Mode, Reset, Enables,
|
Boot process is controlled by signals on the board to board (B2B) connector.
Scroll Title |
---|
anchor | Table_Boot_Signals |
---|
title | Table 2: Boot signals. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | 16%,14%,16%,54 |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal | Direction | Signal State | Description |
---|
BOOTMODE
| input | high or open | Master SPI, x4 Mode
| low or ground
| Slave SelectMAP | PROG_B | input | pulsed low | Clear FPGA configuration (falling edge) and initiate a new configuration sequenz (next rising edge). | DONE | output | high | Completion of configuration sequence. |
|
Note |
---|
SPI FPGA pins D02 and D03 have no pull-ups on the module, so with PUDC=High option, those pins are floating if there are no pull-ups on baseboard. As those pins have SPI RESET function when Quad mode is not enabled, it is mandatory to either add pull-ups on user baseboard or program the Quad Enable bit in Flash nonvolatile status register. |
...