Download a PDF version of this document.

Overview

The Trenz Electronic TEBB0714 is a Carrier for testing, evaluation and development purposes, especially for the Multi Gigabit Transceiver units of the TE0714 module. Although this baseboard is dedicated to the TE0714 module, it is also compatible with other Trenz Electronic 4 x 3 SoMs.

This baseboard provides also through hole pads for pin headers to get access to the PL I/O-bank pins and further interfaces of the mounted Trenz Electronic 4 x 3 SoM.

Refer to https://trenz.org/tebb0714-info for the current online version of this manual and other available documentation.

Key Features

  • Supported SoM
    • TE0714 - AMD Artix-7 FPGA
  • On Board
    • LEDs:
      • SoM status - 1x red
      • User - 1x red, 1x green
  • Interface
    • Trenz 3 x 4 SoM 2x B2B Connector (Samtec LSHM) socket
    • SFP+ connector
    • 4x U.FL connectors for 1x MGT (RX/TX)
    • 2x jumper header 2.54 mm for variable IO bank voltages
    • 5x pin headers 2.54 mm - not populated - for :
      • 42x SE / 21x DIFF IOs and 1x MGT (RX/TX)
      • 36x SE / 18x DIFF IOs and QSPI
      • 6x SE / 3x DIFF IOs
      • JTAG, UART, 1x MGT CLK and 1x ADC input
      • XMOD / TE0790 - JTAG and UART
  • Power
    • Single Rail 3.3 V power supply
  • Dimension
    • 46.0 mm x 75.0 mm

Block Diagram


TEBB0714 block diagram

Main Components

TEBB0714 main components
  1. LED - SoM status, red, D3
  2. LED - User, green and red, D1, D2
  3. Jumper header 2.54 mm - IO bank voltage, J26
  4. Jumper header 2.54 mm - IO bank voltage, J27
  5. 4x U.FL connectors, J8, J7, J6, J5
  6. 50x pin header 2.54 mm - IO, J17
  7. 50x pin header 2.54 mm - IO, J20
  8. 10x pin header 2.54 mm - IO, J4
  9. 16x pin header 2.54 mm - JTAG, UART, MGT CLK and ADC, J3
  10. 12x pin header 2.54 mm - JTAG and UART, JX1
  11. SFP+ connector, J1
  12. B2B connector - Samtec LSHM, JM1, JM2

Initial Delivery State

Storage device

Designator

Content

Notes

---No storage devices on-board.
Initial delivery state of programmable devices

Signals, Interfaces and Pins

Connectors

Connector Type

Designator

Interface

IO count

Notes

B2B

JM1

IO

48x SE / 24x DIFF


B2B

JM1

MGT

2x MGT (RX/TX)


B2B

JM1

MGT CLK

1x DIFF


B2B


JM1

ADC

1x DIFF


B2B

JM2

IO

38x SE / 18x DIFF


B2B

JM2

QSPI

6x SE


SFP+

J1

MGT

2x DIFF


U.FL

J8 / J7 / J6 / J5

MGT

1x MGT (RX/TX)


Pin header 2.54 mm

J17

QSPI

6x SE


Pin header 2.54 mm

J17

IO

36x SE / 18x DIFF


Pin header 2.54 mm

J20

IO

42x SE / 21x DIFF


Pin header 2.54 mm

J4

IO

6x SE / 3x DIFF


Pin header 2.54 mm

J3

MGT CLK

1x DIFF


Pin header 2.54 mm

J3

ADC

1x DIFF


Board connectors

Test Points

Test Point

Top

Bottom

SignalNotes
----No test points used on this board.
Test points information

On-board Peripherals

Chip/InterfaceDesignatorConnected ToNotes
---No peripheral devices on-board.
On-board peripherals

Configuration and System Control Signals

Control signals represent hardware defined logic states, for final state consider the firmware and reference designs.

Control Signals and Buses

Signal Name

Connector.Pin

Direction 1)

Description

PROG_B

J3.11 / JX1.11

IN

Reset Signal from programming adapters.

JM1.94

OUT

Reset input to SoM

BOOTMODE


J3.9 / JX1.9

IN

Selects the SoMs boot source.


JM2.100

OUT

DONE

JM1.96

IN

SoM status LED

JTAG ( TDI / TDO / TCK / TMS )

JM1.86 / JM1.88 / JM1.90 / JM1.92
J3.10 / J3.8 / J3.4 / J3.12
JMX1.10 / JX1.8 / JX1.4 / JX1.12

Signal dependent


UART ( B14_L25 / B14_L0)

JM2.97 / JM2.99
J3.3 / J3.7
JX1.3 / JX1.7

Signal dependent


I2C ( SFP0_SDA / SFP0_SCL )

JM2.46 / JM2.48
J1.4 / J1.5

Signal dependent


1) Direction:

    • IN: Input from the point of view of this board.

    • OUT: Output from the point of view of this board.

    • INOUT: Bidirectional signal.
    • Signal dependent: A Signal can have different functions and directions as part of a Bus.
Control signals and buses

Jumper Headers

Jumper

header

Net name and pin


Notes

Output

Input



J26

VCCIO34 - 1 / 3 / 5




1.8V - 2



2.5V - 4



3.3V_OUT - 6




J27

V_CFG - 1 / 3 / 5




1.8V - 2



V_CFG0 - 4



3.3V_OUT - 6


Jumper headers


Power and Power-On Sequence


Power Rails


Power Rail Name / Schematic Name

Connector.Pin

Direction 1)

Notes

3.3V

J17.5 / J17.46
J20.5 / J20.46

IN

Do not use J3.5 / J4.5 / JX1.5 as supply input.

Board power supply.

3.3V_OUT

JM1.83 / JM2.54
J4.6 / J26.6 / J27.6

IN

Auxiliary Supply from SoM

1.8V

JM2.18 / J26.2

IN

SoM generated IO supply

V_CFG0

JM2.53

IN

SoM generated IO supply

V_CFG0

J27.4

IN

IO supply

V_CFG

J27.1 / J27.3 / J27.5

IN

IO supply source

V_CFG

J17.6 / J17.45 / JX1.6 / J3.6

OUT

IO supply

VCCIO34

J26.1 / J26.3 / J26.5

OUT

Board generated IO supply

VCCIO34

JM1.61 / J20.45 / J20.6

OUT

IO supply

3.3V

JM1.97 / JM1.99

OUT

SoM supply

2.5V

J26.4

OUT

Board generated IO supply

1) Direction:

    • IN: Input from the point of view of this board.
    • OUT: Output from the point of view of this board.
Power rails

Recommended Power up Sequencing


SequenceNet nameRecommended Voltage RangePull-up/downDescriptionNotes
0---Configuration signal setup.See Configuration and System Control Signals.
1Apply power

3.3 V (±5 %)

-

Board power supply. 


Power sequencing

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings *)

Power Rail Name/ Schematic Name

Description

Min

Max

Unit

3.3V

The 3.3V rail can withstand 6.0 V, an external peripheral might not, for example an inserted SFP+ module.

Board supply
-0.36.0

V

VCCIO34

SoM generated IO supply source

-

-

V

V_CFG0

SoM generated IO supply source

-

-

V

Absolute maximum ratings

*) Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Condition". Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.

Recommended Operating Conditions

Temperature range

Trenz Electronic classifies modules into temperature range categories by subsumption of its component data (PCB, ICs, connectors, passive components). The temperature ranges are values for ambient air temperature and do not reflect the junction temperature of individual components.

The categories are:

  • Modules with commercial (C) temperature grade are equipped with components that cover at least the ambient temperature range of 0 °C to 70 °C.
  • Modules with extended (E) temperature grade are equipped with components that cover at least the ambient temperature range of 0 °C to 85 °C.
  • Modules with industrial (I) temperature grade are equipped with components that cover at least the ambient temperature range of -40 °C to 85 °C.

These categories do not take into account the entire custom system consisting of:

  • Customer FPGA/SoC design. The allowed main FPGA/SoC temperature range is specified from the vendor by junction temperature using corresponding classes (C, E, I). See vendor documentation.
  • Cooling solution, active and or passive cooling.
  • Climate or environmental conditions besides ambient temperature range.
  • Module orientation, neighbouring assemblies, neither other heat sources nor the FPGA/SoC as heat source to other components.

Classification of the module can be looked up here: AMD 7 Series Spartan, Artix and Kintex modules i.e.: TExxxx-xx-xx'I'xx, the 'I' indicates that all components are at least in Industrial temperature class.

The temperature of individual components should not exceed the specified range due to self-heating or heating by adjacent components. The actual operating temperature range will depend on the customer design, usage, environment and cooling solution. Consult Cooling Solutions for more information.

Voltage rails

The following table aims to be generic for all variants. The voltage ranges are consistent across assembly variants, but exceptions are possible (custom request).

Parameter

Min

Max

Units

Reference Document

3.3V

3.135

3.465

V


VCCIO34

-

-

V

SoM schematic

V_CFG0

-

-

V

SoM schematic

Recommended operating conditions


Physical Dimensions

  • Module size: 46.0 mm x 75.0 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 8.0 mm.

  • PCB thickness: 1.638 mm.


Physical dimension

Currently Offered Variants 

Trenz shop TEBB0714 overview page*
English pageGerman page

*)  Module article name encoding table: AMD 7 Series Spartan, Artix and Kintex modules

Trenz Electronic shop overview

Revision History

Hardware Revision History

The hardware revision number can be found on the PCB board together with the module's model number, separated by a dash.

Board hardware revision number

DateRevisionChangesDocumentation Link
2016-1101
  • Initial Release

REV01

PCN

Hardware revision history

Document Change History

DateRevisionContributorDescription

  • Update to TRM template revision 4.3.8

2018-05

v.62
Ali Naseri
  • First TRM release

-

all

Document change history

Disclaimer

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Product Disclaimer

Products (incl. Software and Firmware) are exclusively designed, manufactured, and distributed for industrial applications. They are not intended, authorized, or certified for use in critical safety applications, medical devices, aerospace, nuclear, life-support, traffic-control, military, or other environments where malfunction or failure could result in personal injury, death, or significant property or environmental damage.

Trenz Electronic GmbH (“Manufacturer”) excludes any liability for inappropriate use in such contexts. The Customer bears all responsibility for verifying suitability and compliance with applicable regulations when deploying in any critical-use scenario. The Customer also agrees to indemnify and hold harmless the Manufacturer from any third-party claims or liabilities arising from such use.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Table of contents