The Trenz Electronic TE0813 is an industrial grade MPSoC SOM integrating a Xilinx Zynq UltraScale+, DDR4 SDRAM with 64-Bit width data bus connection, SPI Boot Flash memory for configuration and operation, transceivers and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking connections.
All this in a compact 5.2 cm x 7.6 cm form factor, at the most competitive price.
Refer to http://trenz.org/te0813-info for the current online version of this manual and other available documentation.
Key Features
SoC
Device: ZU1 / ZU2 / ZU3 / ZU4 / ZU5 1)
Engine: CG / EG / EV 1)
Speedgrade: -1 / -2 1)
Temperature Range: Extended / Industrial 1)
Package: SFVC784
RAM/Storage
4 GByte DDR4 SDRAM 2)
2 x 64 MByte Serial Flash 3)
EEPROM with MAC address
On Board
Oscillator
Interface
4 x B2B Connector (ADM6)
up to 204 PL IO
HP: 156
HD: 24 / 48 4)
up to 65 PS MIO
4 GTR
4 GTH (with ZU4 and higher)
JTAG
Power
3 V ... 5 V power supply via B2B Connector needed.
Dimension
76 mm x 52 mm
Notes 1)Please, take care of the possible assembly options. Furthermore, check whether the power supply is powerful enough for your FPGA design. 2) Up to 32 GByte are possible with a maximum bandwidth of 2400 MBit/s. 3) Please, take care of the possible assembly options. 4) Please, take care of the possible assembly options.
The power up sequencing highly depends on the use case. In general, it should be possible to enable/disable the processing system (PS) / programmable logic (PL) independently. Furthermore, within the processing logic it should be possible to enable/disable only low-power domain and/or low-power and full-power domain. Additionally, usage of GTR for PS side and GTH/GTY for PL side should be possible. Because of this flexibility the needed parts of the following table needs to be selected individually. For detailed information take a look into schematics.
Full-power domainand GTR transceiver power supply.
Main module power supply for full-power domain. 3 A recommended. Power consumption depends mainly on design and cooling solution.
2.2.2
EN_FPD
3.3 V
-
Full-power domain power enable.
2.2.3
PG_FPD
-
PU 3), 3.3 V
Full-power domain power good status.
Module power-on sequencing for full-power domain finished.
2.2.4
EN_DDR
3.3 V
-
DDR memory power enable.
2.2.5
PG_DDR
PU 3), 3.3 V
DDR memory power good status.
Module power-on sequencing for DDR memory finished.
2.3
GTR Transceiver
Procedure for GTR transceiver starting.
PS transceiver usage needs powered PS (low- and full-power domain).
2.3.1
EN_PSGT
3.3 V
-
GTR transceiver power enable.
2.3.2
PG_PSGT
-
PU 3), 3.3 V
GTR transceiver power good status.
Module power-on sequencing for GTR transceiver finished.
2
Programmable Logic (PL)
Procedure for PL starting.
PS and PL can be started independently.
2.1
PL_DCIN
3.3 V ... 5.0 V (± 5 %)
-
Programmable logic power supply.
Main module power supply for programmable logic. 3 A recommended. Power consumption depends mainly on design and cooling solution.
2.2
EN_PL
-
PU 3), 3.3 V
Programmable logic power enable.
2.3
PG_PL
-
PU 3), 3.3 V
Programmable logic power good status.
Module power-on sequencing for programmable logic finished. Periphery and variable bank voltages can be enabled on carrier.
2.4
VCCO_25 / VCCO_26 / VCCO_64 / VCCO_65 / VCCO_66
4)
-
Module bank voltages.
Enable bank voltages after PG_PL deassertion.
2.5
PG_VCU
-
PU 3), 3.3 V
VCU power good status.
3
GTH / GTY Transceiver
Procedure for GTH / GTY transceiver starting.
PL transceiver usage needs powered PL and low-power PS domain.
3.1
GT_DCDC
3.3 V ... 5.0 V (± 5 %)
-
GTH / GTY transceiver power supply.
Main module power supply for GTH / GTY transceiver. 3 A recommended. Power consumption depends mainly on design and cooling solution.
3.2
EN_GT_R
3.3 V
-
GTH / GTY transceiver power enable.
3.3
PG_GT_R
-
PU 3), 3.3 V
GTH / GTY transceiver power good status.
1) (optional)
2) On TE0813 REV01 boards it is necessary for modules with VCU and/or low-power speedgrade to either connect signal EN_PL to voltage 3.3VIN or to enable EN_PL together with 3.3VIN. This should be changed in a newer revision.
3) (on module)
4) See DS925 for additional information.
Baseboard Design Hints
Board to Board Connectors
The Andromeda modules use Samtec AcceleRate HD High-Density on bottom side.
ADM6-60-01.5-L-4-2 (compatible to ADF6-60-03.5-L-4-2), (240 pins, "60" per row)
The Andromeda carriers use Samtec AcceleRate HD High-Density on top side.
ADF6-60-03.5-L-4-2 (compatible to ADF6-60-01.5-L-4-2), (240 pins, "60" per row)
Features
Board-to-Board Connector 240-pins, 60 contacts per row
0.025" (0.635 mm) pitch
Data Rate: max 56 Gbps
Mates with: ADM6/APF6
Insulator Material: LCP, Black
Contact Material: Copper Alloy
Plating: Au or Sn over 50 µ" (1.27 µm) N
Operating Temperature Range: -55 ºC to +125 ºC
PCIe 5.0 capable: Yes
Lead-Free Solderable: Yes
RoHS Compliant: Yes
Connector Mating height
When using the same type on baseboard, the mating height is 5mm. Other mating heights are possible by using connectors with a different height
Order number
Connector on baseboard
compatible to
Mating height
30095
REF-30095
ADM6-60-01.5-L-4-2
5 mm
31137
REF-31137
ADF6-60-03.5-L-4-2
5 mm
Connectors.
The module can be manufactured using other connectors upon request.
Connector Speed Ratings
The AcceleRate HD High-Density connector speed rating depends on the stacking height; please see the following table:
Stacking height
Speed rating
5 mm
10/ 25/ 56 Gbps
Speed rating.
Current Rating
Current rating of Samtec AcceleRate HD High-Density B2B connectors is 1.34 A per pin (4 pins powered)
Connector Mechanical Ratings
Shock: 100G, 6 ms Sine
Vibration: 7.5G random, 2 hours per axis, 3 axes total
1) This value depends highly on DCDC U4. Higher values are possible with different DCDCs. For more information consult schematic and according datasheets.
PS absolute maximum ratings
*) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
Recommended Operating Conditions
This TRM is generic for all variants. Temperature range can be different depending on assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.
Parameter
Min
Max
Units
Reference Document
LP_DCDC
3.135
5.25
V
DCDCIN
3.135
5.25
V
GT_DCDC
3.135
5.25
V
PL_DCIN 1)
3.135
MPQ8633BGLE-Z: 3.465
TPS548B28 (20A): 3.465
TPS548A28 (15A): 5.25
TPS54JA20 (12A): 5.25
V
3.3VIN
3.135
3.465
V
PS_BATT
1.2
1.5
V
See FPGA datasheet.
VCCO_25
1.164
3.399
V
See FPGA datasheet.
VCCO_26
1.164
3.399
V
See FPGA datasheet.
VCCO_64
0.97
1.854
V
See FPGA datasheet.
VCCO_65
0.97
1.854
V
See FPGA datasheet.
VCCO_66
0.97
1.854
V
See FPGA datasheet.
VREF_64
0.6
1.2
V
See FPGA datasheet.
VREF_65
0.6
1.2
V
See FPGA datasheet.
VREF_66
0.6
1.2
V
See FPGA datasheet.
1) This value depends highly on DCDC U4. Higher values are possible with different DCDCs. For more information consult schematic and according datasheets.
Recommended operating conditions.
Physical Dimensions
Module size: 76 mm × 52 mm. Please download the assembly diagram for exact numbers.
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Document Change History
Date
Revision
Contributor
Description
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission.
Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between:
[interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
[interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission.
Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between:
[interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
[interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission.
Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between:
[interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
[interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
Initial Document
--
all
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission.
Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between:
[interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
[interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
Limitation of Liability
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
Copyright Notice
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
Technology Licenses
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
Environmental Protection
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH, RoHS and WEEE
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy279.$Proxy4022#hasContentLevelPermission.
Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between:
[interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
[interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]