- Created by Jan Kumann, last modified by Kilian Jahn on 07 05, 2024
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 55 Current »
Download PDF version of this document.
Overview
The Trenz Electronic TE0726 is an industrial/extended grade module based on AMD Zynq 7 Series. It is Raspberry Pi form-factor compatible.
Refer to http://trenz.org/te0726-info for the latest online version of this manual and other available documentation.
Key Features
- SoC/FPGA/Module
- Package: CLG225
- Device: Z-7007S, Z-7010, 1)
- Temperature ranges: Commercial / Extended / Industrial 1)
Speed grades: -3, -2, -1 1)
- RAM/Storage
- 512 MByte DDR3L ECC RAM 1)
- 16 MByte QSPI Flash 1)
- 2 KBit EEPROM for FTDI
- 2 KBit EEPROM for Ethernet & USB HUB
- 512 MByte DDR3L ECC RAM 1)
- On Board
- System Controller CPLD
- USB ULPI Transceiver
- 10/100 Ethernet Transceiver with USB hub
- USB to JTAG / UART FTDI
- Interface
- 1x Micro USB (UART/JTAG)
- 4x USB 2.0
- 1x microSD Card socket
- 1x Boot Select DIP switch
- 1x Ethernet RJ45 socket
- 1x TRRS Audio Jack 3.5mm with microphone (PWM audio only)
- 1x HDMI Connector
- 1x CSI-2 Connector (Camera Serial Interface)
- 1x DSI Connector (Display Serial Interface)
- 1x5 Pin Header for I²C
- 2x20 Pin Header with 26 GPIO, 1x I²C , 5 and 3.3 V
- 3 additional Pinheaders for CPLD access, Reset and PUDC (SoC Boot IO State) changes
- Power
- via Micro USB
- via 5V Pin header
- Dimension
- 56 mm x 85 mm, like Raspberry Pi
- Notes
1) Depends on assembly variant
Block Diagram
Main Components
- AMD 7 Series Zynq, U1
- DDR3L ECC RAM, U8
- SPI Flash, U5
- System Controller CPLD, U11
- FTDI USB to multipurpose JTAG/FIFO, U3
- USB Transceiver, U18
- Ethernet Transceiver LAN9514 with 4 port USB Hub , U2
- EEPROM, U6 , U9
- I2C Multiplexer, U10
- Power Supply, U16, U17, U19, U20
- USB power switch, U15 , U21
- Oscillator, U14 , U13 , U7
- LED, D1 , D2
- Micro USB B receptacle, J1
- microSD card, J9
- 2x USB A, J11 , J12
- RJ-45 Ethernet connector, J10
- HDMI connector, J6
- DSI LCD connector, J4
- CSI camera connector, J3
- 3.5mm RCA audio jack, J7
- +5V Power Connector, J5
- Boot DIP switch, S1
- JTAG Port select header, J15
- Boot IO State select header, J14
- Externer reset header, J13
- 2x20 pin header, J8
Initial Delivery State
Storage device name | Content | Notes |
---|---|---|
Quad SPI Flash | not programmed | |
EEPROM FTDI | preprogrammed | |
EEPROM ETH | not programmed | |
System Controller CPLD | preprogrammed |
Signals, Interfaces and Pins
Connectors
Connector Type | Designator | Interface | IO CNT | Notes |
---|---|---|---|---|
2x 20 2.54 mm Pin Header | J8 | GPIO (HR) | 26 | |
2x 20 2.54 mm Pin Header | J8 | I²C | 2 | Multiplexer U10 |
2x 2.54 mm Pin Header | J15 | JTAG select | 1 | SoC or SC select |
2x 2.54 mm Pin Header | J14 | Boot IO State | 1 | |
2x 2.54 mm Pin Header | J13 | External reset | 1 | |
2x USB A stacked | J11, J12 | USB 2.0 | 12 | To USB PHY (ULPI) |
5x 2.54 mm Pin Header | J2 | I²C | 2 | Multiplexer U10, I²C shared with J4 |
5x 2.54 mm Pin Header | J2 | Interrupt | 1 | Multiplexer U10 |
DIP switch | S1 | Boot select | 1 | Shared with SPI |
FCC | J4 | MIPI DSI | 6 (3 pairs) | |
FCC | J4 | I²C | 2 | Multiplexer U10 |
FCC | J3 | I²C | 2 | Multiplexer U10 |
FCC | J3 | MIPI CSI-2 | 8 (4 pairs) | |
HDMI | J6 | HDMI | 8 (4 pairs) | |
HDMI | J6 | I²C | 2 | Multiplexer U10 |
HDMI | J6 | Interrupt | 1 | Multiplexer U10 |
Micro-USB 2.0 B | J1 | JTAG | 2 (1 pair) | SoC or SC selectable |
microSD Card | J9 | Interrupt | 1 | Multiplexer U10 |
microSD Card | J9 | SD | 5 | |
RJ-45 Ethernet | J10 | 10/100 ETH | 12 | To USB PHY (ULPI) |
TRRS 3.5 mm | J7 | RCA Audio | 2 | |
TRRS 3.5 mm | J7 | RCA Mic | 1 |
Test Points
Test Point | Signal | Notes |
---|---|---|
TP1 | TDI | |
TP2 | 3.3V | |
TP3 | TDO | |
TP4 | 1.8V | |
TP5 | TCK | |
TP6 | 1.0V | |
TP7 | TMS | |
TP8 | 1.35V | |
TP9 | 5V | |
TP10 | GND | |
TP11 | GND | |
TP12 | GND | |
TP13 | GND | |
TP14 | POR B | Zync SoC reset signal |
TP15 | PG_1.35V | Power good signal |
TP16 | PG_1.8V | Power good signal |
TP17 | PG_3.3V | Power good signal |
TP18 | PG_1.0V | Power good signal |
TP19 | PUDC | Zynq SoC IO State during boot process |
TP20 | SPI0_DQ3/M0 | Boot source select signal |
On-board Peripherals
Chip/Interface | Designator | Connected To | Notes |
---|---|---|---|
DDR3L RAM | U8 |
| |
System Controller CPLD | U11 |
| |
USB-PHY | U18 |
| |
USB Ethernet Hub | J10 |
| |
FTDI | U3 |
| |
I²C Expander | U10 |
| |
I²C Interrupts | U10 |
| |
Oscillator | U14 |
| 33.3 MHz |
Oscillator | U9 |
| 25 MHz |
Oscillator | U7 |
| 12 MHz |
Configuration and System Control Signals
Connector | Signal Name | Direction1) | Description |
---|---|---|---|
S1 | SPI0_DDQ3 / MO | IN | Boot source switch, SPI flash or SD Card |
J13 | EXTRST , POR_B , nRST | IN | Reset Zynq SoC |
J14 | PUDC | IN | State of Zynq SoC IO lines during boot |
J15 | JMODE , BDBUS7 | IN | JTAG endpoint selction, System Controller or Zynq SoC |
1) Direction:
- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.
Power and Power-On Sequence
Power Rails
Power Rail Name/ Schematic Name | Connector + Pin | Direction1) | Notes |
---|---|---|---|
USB_B_Vbus | J1 | IN | Default power supply 5V |
5V | J5.1 | IN/OUT | 2x Pin Header, intended for alternative powering |
5V | J2.1 | OUT | 5x Pin Header 2x 20 Pin Header |
5V_HDMI | J6.18 | OUT | HDMI, reverse current protection diode D11 |
V_BUS_A , V_BUS_B , V_BUS_C , V_BUS_D | J11.A1 , J11.B1 , | OUT | 2x USB A socket |
3.3V | J8.1 , J8.17 J3.15 J4.15 J9.4 | OUT | 2x 20 Pin Header FCC CSI FCC DSI microSD Card socket |
1) Direction:
- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.
Recommended Power up Sequencing
Sequence | Net name | Recommended Voltage Range | Pull-up/down | Description | Notes |
---|---|---|---|---|---|
1 | USB_B_Vbus | 5V (± 5 %) | - | Main Power supply via Micro-USB J1. | Main module power supply. 0.5 A minimum. Power consumption depends mainly on design and cooling solution. If more current is needed use J5 for external power supply. |
2 | 3.3V | - | - | Module generated output voltage. | |
3 | - | - | - | External components which are connected to J8 should be powered up with 3.3V from module. | See link: https://docs.amd.com/v/u/en-US/ds187-XC7Z010-XC7Z020-Data-Sheet , page 8 "PL Power‐On/Off Power Supply Sequencing" for PL IO usage |
Technical Specifications
Absolute Maximum Ratings *)
Power Rail / Schematic Name | Description | Min | Max | Unit |
---|---|---|---|---|
USB_B_Vbus | Determined through "USB 2.0 VBUS Max Limits" | 4.75 | 5.5 | V |
5V | Determined through "USB 2.0 VBUS Max Limits" | 4.75 | 5.5 | V |
*) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these
or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
Recommended Operating Conditions
This TRM is generic for all variants. Temperature range can be differ depending on the assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
- Variants of modules are described here: Article Number Information
- Modules with commercial temperature grade are equipped with components that cover at least the range of 0°C to 75°C
- Modules with extended temperature grade are equipped with components that cover at least the range of 0°C to 85°C
- Modules with industrial temperature grade are equipped with components that cover at least the range of -40°C to 85°C
- The actual operating temperature range will depend on the FPGA / SoC design / usage and cooling and other variables.
Parameter | Min | Max | Units | Reference Document |
---|---|---|---|---|
USB_B_Vbus | 4.75 | 5.25 | V | Schematic of this board. SCH-TE0726-04-41C94-A.PDF page 3, table "Supported Voltage Ranges" |
5V | 4.75 | 5.25 | V | Schematic of this board. SCH-TE0726-04-41C94-A.PDF page 3, table "Supported Voltage Ranges" |
Physical Dimensions
Module size: 85 mm × 56 mm. Please download the assembly diagram for exact numbers.
PCB thickness: 1.57 mm ± 10 %.
Currently Offered Variants
Trenz shop TE0726 overview page | |
---|---|
English page | German page |
Revision History
Hardware Revision History
Date | Revision | Changes | PCN Link | Documentation Link |
---|---|---|---|---|
2023-06-10 | 04 | Page Numbers refer to the schematic for this revision
| PCN-20230619 TE0726-03 to TE0726-04 Hardware Revision Change | TE0726-04 |
2021-01-21 | 03 |
| PCN-20210121 TE0726-03 DDR3 Change and Product Update | TE0726-03 |
2019-04-08 | 03 |
| - | TE0726-03 |
2016-05-06 | 03 |
| - | TE0726-03 |
2016-01-26 | 02 |
| - | TE0726-02 |
- | 01 |
| - | - |
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Document Change History
Date | Revision | Contributor | Description |
---|---|---|---|
Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3575#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3575#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3575#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
2024-04-16 | v.54 | John Hartfiel |
|
2017-11-10 | v.52 | John Hartfiel |
|
2017-11-10 | v.51 | Ali Naseri |
|
2017-05-30 | v.40 | Jan Kumann |
|
2017-05-24 | v.1 | Jan Kumann |
|
-- | all | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3575#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
Disclaimer
Data Privacy
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
Document Warranty
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
Limitation of Liability
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
Copyright Notice
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
Technology Licenses
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
Environmental Protection
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH, RoHS and WEEE
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy244.$Proxy3575#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
Table of contents
- No labels