Additional Master Pinout Viewer/XDC-Generator is available on Trenz Electronic Download - Pinout
How to Use This Guide
- This guide is split into two tables:
- Module Power Connection Table shows the power source of the different FPGA banks and components of the different Module Boards.
Carrier Board Power Connection Table shows the power source of the B2B connectors with pins, schematic names and available options of the different Carrier Boards.
- The PCBs have fixed and variable user supplied I/O voltage pins. Variable power supply pins are colored in four groups (VCCIOA, VCCIOB, VCCIOC and VCCIOD).
- Find your module model on the Module Power Connection Table and check the power supply of the different FPGA banks.
- If the power supply is variable, go to the Carrier Board Power Connection Table and see how it's connected on your carrier board. Often the power source can be selected by jumper, resistor or variable used from other connector pin of the carrier board. So use the schematic name or the component designator from the table to search for the available options in the PCB schematics or TRM.
Module Power Connection Table
| Group | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Module | Bank | IOs | Type | Voltage | Bank | IOs | Type | Voltage | Bank | IOs | Type | Voltage | Bank | IOs | Type | Voltage | Bank | IOs | Type | Voltage | Bank | IOs | Type | Voltage | Bank | IOs | Type | Voltage | |
| TE0710 | B15 | 48 | HR | VCCIOA | - | - | - | - | - | - | - | - | B34 | 50 | HR | VCCIOD | B16 | 6 | HR | 3.3V | B14 | 8 | HR | 3.3V | 2x 100Mbit ETH | ||||
| TE0711 | B15 | 48 | HR | VCCIOA | B34 | 36 | HR | VCCIOB | B14 | 18 | HR | 3.3V | B35 | 50 | HR | VCCIOD | B16 | 6 | HR | 1.8V | B14 | 8 | HR | 3.3V | B34 | 8 | HR | VCCIOB | |
| TE0712 | B16 | 48 | HR | VCCIOA | B13 | 20 | HR | VCCIOB | B14 | 18 | HR | 3.3V | B15 | 50 | HR | VCCIOD | B13 | 6 | HR | VCCIOB | B14 | 8 | HR | 3.3V | 1x 100Mbit ETH / B13 | 4 | HR | VCCIOB | |
| TE0715-xx-15 | B13 | 48 | HR | VCCIOA | B34 | 16 | HR | VCCIOC | B34 | 18 | HR | VCCIOC | B35 | 40 | HR | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0715-xx-30 | B13 | 48 | HR | VCCIOA | B34 | 16 | HP | VCCIOC | B34 | 18 | HP | VCCIOC | B35 | 40 | HP | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0720 | B35 | 48 | HR | VCCIOA | B34 | 36 | HR | VCCIOB | B33 | 18 | HR | VCCIOC | B13 | 50 | HR | VCCIOD | B501 | 6 | MIO | 1.8V | B500 | 8 | MIO | 3.3V | 1x Gbit ETH | SGMII | |||
| TE0820* | B25 B26 | 48 | HD | VCCIOA | B64 | 50 | HR | VCCIOD | 6 | MIO | 1.8V | 8 | MIO | 3.3V | 1x Gbit ETH | ||||||||||||||
| TE0741 | B13 | 48 | HR | VCCIOA | B16 | 16 | HR | VCCIOB | B15 | 18 | HR | VCCIOC | B12 | 50 | HR | VCCIOD | GTX | 1 Lane | B14 | 8 | HR | 3.3V | GTX | 2 Lanes | GTX | ||||
| TE0742* | |||||||||||||||||||||||||||||
| TE0841 | B64 | 48 | HR | VCCIOA | B66 | 18 | HP | VCCIOB | B68 | 18 | HP | VCCIOC | B67 | 50 | HP | VCCIOD | GTH | 1 Lane | B65 | 8 | HR | 3.3V | GTH | 2 Lanes | GTH | ||||
| TE0842* | |||||||||||||||||||||||||||||
I/O resource comparison for all 4x5 modules. There are maximum 4 user supplied I/O voltages (VCCIOA, VCCIOB, VCCIOC and VCCIOD).
Attention: Maximum supply voltage for HP banks is 1.8V.
Carrier Board Power Connection Table
| IO Voltage | B2B Connector | Carrier Boards | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Direction | JB1 | JB2 | TE0701 | TE0703 Rev1-Rev4 | TE0703 Rev5 | TE0705 | TE0706 | |||||
| Pin | Pin | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | Schematic Name | Value,Option,Comp. | ||
| PWR_1 | out | 2,4,6 | 1,3,5,7 | 5V0 | 5V | 3.3V | 3.3V | 3.3V | 3.3V | 5V0 | 5V | 3.3V | 3.3V |
| VCCIOA | out | 10,12 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO35 | R23→M3.3VOUT / J1B-B1 | VCCIOA | J5→M3.3VOUT,M1.8VOUT / R23→M3.3VOUT / J1-B1 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO35 | R20->M3.3VOUT/J6B-B32 | |
| VCCIOD | out | 8,10 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO13 | R26→M3.3VOUT / J2B-B1 | VCCIOD | J10→M3.3VOUT,M1.8VOUT / R26→M3.3VOUT / J2B-B1 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO13 | R22->M3.3VOUT/J6B-B1 | |
| PWR_2 | out | 14,16 | 3V3IN | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | 3V3IN | 3.3V | 3.3V | 3.3V | |
| VCCIOB | out | 2,4 | no name | FMC_VADJ/2V5/3.3VOUT | VCCIO34 | J5→M3.3VOUT / J1B-B32 | VCCIOB | J8→M3.3VOUT,M1.8VOUT / J2B-B32 | VIOTB | FMC_VADJ/2V5/3.3VOUT | 1.8V | 1.8V | |
| VCCIOC | out | 6 | no name | FMC_VADJ/2V5/3.3VOUT | VCCIO33 | R25→M3.3VOUT / J2B-B32 | VCCIOC | J9→M3.3VOUT,M1.8VOUT / R25→M3.3VOUT / J2B-B32 | VIOTB | FMC_VADJ/2V5/3.3VOUT | VCCIO33 | R21->M3.3VOUT | |
| PWR_M1 | in | 9,11 | 3.3VOUT | 3.3V | 3.3VOUT | 3.3V | M3.3VOUT | 3.3V | 3.3VOUT | 3.3V | M3.3VOUT | 3.3V | |
| PWR_M2 | in | 40 | VIOB | 1.8V | M1.8VOUT | 1.8V | M1.8VOUT | 1.8V | VIOB | 1.8V | M1.8VOUT | 1.8V | |
| PWR_VBAT | out | 80 | VBAT | B1 | VBAT | J7 | VBAT | J7 | NC | VBAT | J9 | ||
| PWR_JTAG | in | 92 | VCCJTAG | VCCJTAG | VCCJTAG | VCCJTAG | VCCJTAG | ||||||
Power comparison of all 4x5 carrier boards. Power direction based on carrier boards view.There are 4 variable user supplied I/O voltages (VCCIOA, VCCIOB, VCCIOC and VCCIOD). PWR_1 and PWR_2 are fixed from carrier boards. PWR_M1 and PWR_M2 normally use default value from module.
Attention: On some Carrier-Boards user supplied I/O voltages are connected together (red colored schematic names).
Overview
Content Tools