Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

This Trenz Electronic Starter Kit  consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure.  See Shop Link for detailed content.

TE0808 UltraSOM+ - Wiki with TRM, reference projects, application notes and more

TE0790-XMOD FTDI JTAG Adapter - Wiki with settings and configurations

Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC

Project Delivery - General descriptions of reference designs and content

TE0808 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more

TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more

TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more

TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator

Shop TE0808-Starter-Kit - contains prices, order number, content...

Xilinx Software and Driver

Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation

Xilinx Download Area - All Xilinx Software, Device Models and Libraries

Getting Started

WARNING: Do not changed DIP-Switch positions from both XMOD adapters on TEBF0808
  1. Connect cold-device plug with power supply and set power switch to on.

  2. Connect JTAG-USB cable with host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture)
  3. Insert SD-Card with predefined example into SD-Card slot.
  4. open Serial Console:
    1. COM Port: for correct number see device manager
    2. Speed:115200
  5. Press Core V1 Mini-ITX case power on button.
  6. Press Core V1 Mini-ITX reset button  to start boot process
  7. Linux login:
    1. User Name:root
    2. Password:root

Important Notes

For ES1 only:

Starter Kit will be shipped with all cable connected.

ATX Power

Enclosure USB

Enclosure FAN1 and HDAUDIO



Power Button and HDD LED

Reset Button and Power LED



For support, please go to or contact

  • No labels