You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Table of contents

General instructions

  • working in process

CPLD Access  




Remove TEC0850 from Backplane


  • Set DIP S1:1 to OFF 
  • Connect 12V Power source
  • Connect Arrow USB Programmer 
  • Run Quartus Prime Lite Edition
  • Click to run "Programmer"
  • If you see "No Hardware"  Chick "Hardware Setup..." and select "Arrow-USB-Blaster" 
  • Press and select *.pof file to program.
  • Check "Program/Configure" checkboxes 
  • Press 
  • After the end of programming, progress bar should show you 


Available CPLD Firmware


  • No labels