You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

some sources available on public doc TEBT0808 TRM

Download PDF version of this document.

Table of Contents

Overview

The Trenz Electronic TEBT0808-01 is a testboard for module TE0808 (REV 02 and 03) as well as for TE0803 (REV 01).

Refer to http://trenz.org/tebt0808-info for the current online version of this manual and other available documentation.

Key Features

  • Accepts TE0808 / TE0803
  • Single 3.3V input
  • Header for TE0790 JTAG/UART Adapter
  • 20 Pin ARM JTAG header (connected to MIO JTAG 0)
  • 10 Pin I2C header for Silabs Clock Builder Field Programmer
  • Done, Error/Status LEDs
  • One PL GT with SMA connectors
  • One PS GT with SMA connectors
  • GT local loopback
  • PL I/O loopbacks
  • PS I/O loopbacks
  • Boot Mode switches
  • Power control switches to control TE0808 power domains
  • One pre-assembled TE0790 XMOD FTDI JTAG adapter

Supported Bootmodes are SPI and JTAG.

Block Diagram


TEBT0808 block diagram

Main Components

TEBT0808 main components
  1. Uninsulated 2 mm rigid socket. J8-J7
  2. SMA Coaxial straight. J6- J9...15
  3. Surface Mount Schottky Barrier Rectifier. D1
  4. Box Headers, Straight/Angled J5-J16
  5. Board to Board Connector. J1...4
  6. Clock Oscillator, U2
  7. On-Board LED, D2...4
  8. DIP-Switch, S1...3
  9. XMOD JTAG Base, 

Initial Delivery State

Storage device name

Content

Notes




Initial delivery state of programmable devices on the module

Configuration Signals

Boot mode can be set by DIP-Switch S1.

M3M2M1M0Bootmode HexBootmodeNotes
ONONONON0x0PS Main JTAG (TE0790 USB JTAG)Needed for SPI Flash Programming
ONONOFFON0x2SPI Flash (dual parallel, 4bit x 2, 32bit Addressing)Default
Boot process.

Signal

B2BNote

PLL_RST

J2-89
SRST_BJ2-96connected to PJTAG0_SRST - J16
Reset process.

Signals, Interfaces and Pins

Board to Board (B2B) I/Os

FPGA bank number and number of I/O signals connected to the B2B connector:

B2B ConnectorInterfacesNumber of I/ONotes
J1

User I/O

22 singel ended, 11 Differential

8 singel ended, 4 Differential

8 singel ended, 4 Differential

8 singel ended, 4 Differential

3 singel ended

Connected to Bank 66

Connected to Bank 228

Connected to Bank 229

Connected to Bank 230

VCCO_66, PL_1V8

J2

Ethernet PHY

32 singel ended, 16 Differential

4 singel ended, 16 Differential

Connected to Bank 505

Connected to Bank 128

Control Signals15 single endedPLL_SEL0, PLL_SEL1, PLL_RST, EN_GTR, EN_PL, PLL_LOLN, EN_PSGT, ERR_STATUS, ERR_OUT,SRST_B, INIT_B, PROG_B, EN_FPD , EN_LPD , DONE
Power Control Signal10 single endedEN_PLL_PWR, PLL_FINC ,PG_PLL_1V8, LP_GOOD, PG_DDR, PG_PL, PG_FPD, PG_PSGT, PG_GT_R, PG_GT_L
JTAG Interface7 single endedTCK, TDI, TMS, TDO, MR, Rxd, Txd
WANNE22 single endedPLL_SCL, PLL_SDA
Clock

6 singel ended, 3 Differential

CLK0, CLK7, CLK8

J3



User I/O

12 singel ended, 6 Differential

12 singel ended, 6 Differential

Connected to Bank 48

Connected to Bank 47

Clock6 singel ended, 3 DifferentialCLK228, CLK229, CLK230
PJTAG Interface7 single endedPJTAG0_TCK, PJTAG0_TDI, PJTAG0_TMS, PJTAG0_TDO,
MIO27 single endedMIO19..76
UART2 single endedTXD, RXD
Power pins4 single endedPS_1V8, SI_PLL_1V8, VCCO_48, VCCO_47
J4User I/O

48 singel ended, 62 Differential

4 single ended

Connected to Bank 64

Connected to Bank 64

Power pins4 single endedVCCO_64, VCCO65
General PL I/O to B2B connectors information


JTAG Interface

JTAG access to the TExxxx SoM through B2B connector JMX.

JTAG Signal

B2B Connector

TMSJ2-126
TDIJ2-122
TDOJ2-124
TCK

J2-120

MRJ2-83
RXDJ3-141
TXDJ3-139
JTAG pins connection

On-board Peripherals

Chip/InterfaceDesignatorNotes



On board peripherals


DIP Switch

There are thre DIP Switches, S1, S2, S3.

The Boot Mode can be set through DIP Switch S1, refer to Boot Mode table.

Signals

B2B

S1 switchNotes
MODE0J2-109S1A
MODE1J2-107S1B
MODE2J2-105S1C
MODE3J2-103S1D
DIP Switch S1

SignalsB2BS2 switchNotes
EN_PSGTJ2-84S2A
EN_GT_RJ2-95S2B
EN_GT_LJ2-97S2C
EN_PLL_PWRJ2-77S2Dconnected to PG_PL
DIP Switch S2

SignalsB2BS3 switchNotes
EN_DDRJ2-112S3A
EN_LPDJ2-108S3B
EN_PLJ2-101S3C
EN_FPDJ2-102S3D
DIP Switch S3

LEDs

DesignatorColorConnected toActive LevelNote
D2RedDONELow
D3RedERR_STATUSLow
D4RedERR_OUTLow
On-board LEDs


Ethernet

BankSignal NameETH1ETH2Signal Description






































































Ethernet PHY to Zynq SoC connections

CAN Transceiver

BankSchematicU?? PinNotes

D-Tx
Driver Input

R-Rx
Reciever Output
CAN Tranciever interface MIOs


Clock Sources

DesignatorDescriptionFrequencyNote
U2MEMS Oscillator125.00 MHz
Osillators

Power and Power-On Sequence

Power Supply

Power supply with minimum current capability of xx A for system startup is recommended.

Power Consumption

Power Input PinTypical Current
VINTBD*
Power Consumption

* TBD - To Be Determined

Power Distribution Dependencies

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Power Distribution

Power-On Sequence

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Power Sequency

Voltage Monitor Circuit

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Voltage Monitor Circuit

Power Rails

Power Rail Name

B2B Connector

JM1 Pin

B2B Connector

JM2 Pin

B2B Connector

JM3 Pin

DirectionNotes
























Module power rails.

Bank Voltages

Bank          

Schematic Name

Voltage

Notes




























Zynq SoC bank voltages.


Board to Board Connectors

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

  • 3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

    Operating Temperature: -??°C ~ ??°C
    Current Rating: ??A per ContactNumber of Positions: ??
    Number of Rows: ??

Technical Specifications

Absolute Maximum Ratings

SymbolsDescriptionMinMaxUnit




V




V




V




V




V




V




V




V










PS absolute maximum ratings

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

ParameterMinMaxUnitsReference Document



VSee ???? datasheets.



VSee Xilinx ???? datasheet.



VSee Xilinx ???? datasheet.



VSee Xilinx ???? datasheet.



VSee Xilinx ???? datasheet.



VSee Xilinx ???? datasheet.



VSee Xilinx ???? datasheet.



°CSee Xilinx ???? datasheet.



°CSee Xilinx ???? datasheet.
Recommended operating conditions.

Physical Dimensions

  • Module size: ?? mm × ?? mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: ? mm.

PCB thickness: ?? mm.

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Physical Dimension

Currently Offered Variants 

Trenz shop TE0728 overview page
English pageGerman page
Trenz Electronic Shop Overview

Revision History

Hardware Revision History

DateRevisionNotePCN
-

-




Hardware Revision History

Document Change History

DateRevisionContributorDescription

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • change list

--

all

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • --
Document change history.

Disclaimer

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy241.$Proxy3496#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]






  • No labels