You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Table of contents

CPLD Access  

Remove TEC0850 from Backplane


  • Set DIP S1:1 to OFF 
  • Connect 12V Power source
  • Connect Arrow USB Programmer

CPLD Programming

  1. Run Quartus Prime Lite Edition
  2. Click to run "Programmer"
  3. If you see "No Hardware"  :
    Click "Hardware Setup..." and select "Arrow-USB-Blaster" 
  4. Press and select *.pof file to program.
  5. Check "Program/Configure" checkboxes
     
  6. Press
     
  7. After the end of programming, progress bar should show you
     

Available CPLD Firmware


  • No labels