Page History
...
Affected Product | Effected Changes | Status | CPLD | Change Log current development state | Link to current firmware description |
---|---|---|---|---|---|
TEM0007 | #? | Unprocessed | LCMXO2-256HC | currently not available | |
TE0710 | #? | Unprocessed | LCMXO2-256HC | TE0710 CPLD | |
TE0711 | #? | Unprocessed | LCMXO2-256HC | TE0711 CPLD | |
TE0712 | #? | Processing | LCMXO2-256HC | TE0712 CPLD | |
TE0713 | #? | Unprocessed | LCMXO2-256HC | TE0713 CPLD | |
TE0715 | #? | Processing | LCMXO2-256HC | TE0715 CPLD | |
TE0720 | #2,#5,#6,#7 (#4 since CPLD Rev06) | Test phase | LCMXO2-1200HC | -- - Boot mode configuration via mdio interface (phytool) -- - Reseting the FPGA after boot mode configuration -- - Matched to FSBL code to show all informations while booting in linux console. For example Boot mode, pudc state ... -- - Monitoring CR4[15:8] and CR5[10] continuously, to implement a state machine for boot mode configuration correctly. -- - Using CR4[15:12] as control bit to reset FPGA -- - Using CR4[9:8] as boot mode configuration , if the FPGA is not restarted still via soft reset. -- - Using CR5[9:8] asd boot mode configuration, if the FPGA is restarted already via soft reset. -- - Using CR[10] to monitor , if the FPGA is restarted already via soft reset. -- - Using i2c_slave.vhd instead of I2C_to_GPIO.v | TE0720 CPLD |
TE0741 | #? | Unprocessed | LCMXO2-256HC | TE0741 CPLD | |
TE0820 | #? | Processing | LCMXO2-256HC | TE0820 CPLD | |
TE0821 | #? | Unprocessed | LCMXO2-256HC | TE0821 CPLD | |
TE0823 | #? | Unprocessed | LCMXO2-256HC | TE0823 CPLD | |
TE0841 | #? | Unprocessed | LCMXO2-256HC | TE0841 CPLD | |
TE0701 | #? | Test phase | LCMXO2-1200HC | TE0701 CPLD | |
TE0703 | #? | Unprocessed | LCMXO2-1200HC | TE0703 CPLD - CC703S | |
TE0705 | #? | Test phase | LCMXO2-1200HC | TE0705 CPLD | |
TE0706 | #? | HW changes | --- | --- | --- |
TEBA0841 | #? | HW changes | --- | --- | --- |
TEF1002 | #? | Unprocessed | 10M08 | TEF1002 SC CPLD MAX10 | |
TEB0707 | #? | Unprocessed | 10M08 | TEB0707 MAX10 CPLD |
Status:
- No changes: ---
- HW changes: HW changes are need to support new features
- Unprocessed: Revision not started
- Processing: Revision in process
- Test phase: rework finished test phase started
- Released (date): Firmware is released and will be used
...